Learn · Material Processing (Metallurgical Aspects): Fundamental, and Practical
Lecture 18 of 60Week 4
Sheet metal forming: Stock Layout-Nesting
Prof. Dheerendra Kumar Dwivedi · IIT Roorkee
Credits and licence
- From
- Material Processing (Metallurgical Aspects): Fundamental, and Practical, IIT Roorkee (at NPTEL)
- Licence
- CC BY-NC-SA, as NPTEL states it. Non-commercial use only.
- Attribution
- NPTEL states: "Distributed under Creative Commons Attribution-ShareAlike / CC BY - NC - SA", beside a BY-NC-SA badge.
- Who can watch
- Tweens profiles and older. How courses are placed
All the lectures
- Materials Processing: Scope
- Materials Processing: Introduction
- Materials Processing: Metal Forming and Plasticity
- Materials Processing: Plasticity and Structure
- Materials Processing: Cold and Hot working
- Materials Processing: Recovery and Recrystallization
- Metal forming: Rolling
- Metal forming: Forging
- Metal forming : Extrusion
- Metal forming: Wire Drawing
- Sheet Metal Operations: Fundamentals
- Sheet Metal Operations: Drawing
- Press for metal forming I
- Press for metal forming II
- Additional metal forming processes
- Advances in Metal Forming
- Die, Die-set and Die materials for metal forming
- Sheet metal forming: Stock Layout-Nesting
- Metallurgy and metal forming
- Heat treatment in metal forming
- Joining of metals: Fundamentals I
- Joining of metals: Fundamentals II
- Joining of metals: Fundamentals III
- Welding of metals: Fundamentals IV
- Welding of metals: Metal Characteristics
- Welding of metals: Arc welding I
- Welding of metals: Arc welding II
- Welding of metals: Arc welding processes I
- Welding of metals: Arc welding processes II
- Welding of metals: Arc welding processes III
- Welding of metals: Heat affected zone of TH metals
- Welding of metals: Heat affected zone of WH and PH metals
- Welding of metals: Solid state joining process I
- Welding of metals: Solid state joining process- II
- Welding of metals: SSJ and RSW
- Welding of metals: Welding metallurgy I
- Welding of metals: Welding metallurgy- II
- Welding of metals: Dissimilar metal welding
- Welding of metals: Hybrid joining
- Welding of metals: Improving weld joint properties I
- Welding of metals: Improving weld joint properties II
- Metal casting: Overview
- Metal casting: Pattern and Mould
- Metal casting: Moulding
- Metal casting: Casting processes
- Metal casting: Quality of casting
- Metal casting: Casting defects
- Metal casting: Metallurgical issues of casting
- Metal casting: Die casting and Sand mould casting comparison
- Metal casting: Improving the performance of casting
- Metal casting: Heat treatment of castings
- Powder Metallurgy: Scope
- Powder Metallurgy: Powder characteristics
- Powder Metallurgy: Steps of manufacturing
- Practical & Lab Demonstration: Pattern making, moulding and casting
- Practical & Lab Demonstration: Shielded metal arc welding of steel-microstructure and mechanical properties
- Practical & Lab Demonstration: Controlling microstructure by heat treatment, TIG re-melting & friction stir processes and image analysis
- Practical & Lab Demonstration: Gas welding and gas cutting of steel- characteristics of cut edge
- Practical & Lab Demonstration: GTAW of similar and dissimilar steels
- Practical & Lab Demonstration: Friction stir welding