Learn · Manufacturing Processes - Casting and Joining
Lecture 1 of 20Week 1
Lecture 01 - Casting: Introduction to Casting
Prof. Sounak Kumar Choudhury · IIT Kanpur
Credits and licence
- From
- Manufacturing Processes - Casting and Joining, IIT Kanpur (at NPTEL)
- Licence
- CC BY-NC-SA, as NPTEL states it. Non-commercial use only.
- Attribution
- NPTEL states: "Distributed under Creative Commons Attribution-ShareAlike / CC BY - NC - SA", beside a BY-NC-SA badge.
- Who can watch
- Tweens profiles and older. How courses are placed
All the lectures
- Lecture 01 - Casting: Introduction to Casting
- Lecture 02 - Various aspects of Casting
- Lecture 03 - Patterns and Moulds
- Lecture 04 - Sand Mould and Gating System
- Lecture 05 - Gating System Design
- Lecture 06 - Aspiration Effects and Riser Design
- Lecture 07 - Solidification of Metals and Alloys
- Lecture 08 - Stress, Strain and Strain Rate and Shear Plane Angle
- Lecture 09 - Steps in Sand Casting Processes
- Lecture 10 - Expendable Mould Casting Processes
- Lecture 11 - Permanent Mould Casting
- Lecture 12 - Various Casting Processes & Cost Analysis
- Lecture 13 - Cost analysis, Casting Defects & Product Design
- Lecture 14 - Introduction to Joining Processes
- Lecture 15 - Characteristic Features of Welding Processes
- Lecture 16 - Various Welding Processes
- Lecture 17 - Advanced Welding Processes
- Lecture 18 - Characteristic Features of Arc Welding
- Lecture 19 - Shielded metal arc welding, MIG & TIG Welding
- Lecture 20 - Gas Welding, Brazing and Soldering, Welding Defects