Learn · Introduction to Machining and Machining Fluids

Lecture 28 of 28Live Session

Live Session 16-03-2021

Prof. Mamilla Ravi Sankar · IIT Guwahati

Credits and licence

From
Introduction to Machining and Machining Fluids, IIT Guwahati (at NPTEL)
Licence
CC BY-NC-SA, as NPTEL states it. Non-commercial use only.
Attribution
NPTEL states: "Distributed under Creative Commons Attribution-ShareAlike / CC BY - NC - SA", beside a BY-NC-SA badge. Coordinated by IIT Madras.
Who can watch
Tweens profiles and older. How courses are placed

All the lectures

  1. Introduction Video
  2. Introduction & Importance of Machining Video
  3. Principles of Machining or Metal Cutting Video
  4. Cutting Tools Video
  5. Forces in Machining Video
  6. Tribology in Machining Video
  7. Lubrication surface roughness in Machining Video
  8. Machinability and Thermal Aspects Video
  9. Tool Wear and Tool life Part-1 Video
  10. Tool Wear and Tool life Part-2 Video
  11. Tool Wear and Tool life Part-3 Video
  12. Tool Materials and Coatings Video
  13. Machining Fluids /Cutting Fluids and its Additives Part 1 Video
  14. Machining Fluids /Cutting Fluids and its Additives Part 2 Video
  15. Machining Fluids / Cutting Fluids and its Emissions Video
  16. Eco Friendly Cutting Fluids Part 1 Video
  17. Eco Friendly Cutting Fluids Part 2 Video
  18. Rheology and Thermal Characterization of Machining / Cutting Fluids Video
  19. Bio-degradation Studies of Machining /Cutting Fluids Video
  20. Cutting Fluid Application in Machining Region Video
  21. Practical Machining Processes - 1 Video
  22. Practical Machining Processes - 2 Video
  23. Introduction to Abrasive Processes - Grinding Video
  24. Cutting fluids in Grinding Process Video
  25. Unbonded Conventional Abrasive Processes Video
  26. Advances in Metal Cutting_Machining Processes Video
  27. Advances in Metal Cutting_Machining Processes-2 Video
  28. Live Session 16-03-2021 Video