Learn · Computer Aided Design and Manufacturing

Lecture 4 of 51Computer Aided Design and Manufacturing

Raster Graphics - II

Prof. Anoop Chawla and Prof. P.V. Madhusudan Rao · IIT Delhi

Credits and licence

From
Computer Aided Design and Manufacturing, IIT Delhi (at NPTEL)
Licence
CC BY-NC-SA, as NPTEL states it. Non-commercial use only.
Attribution
NPTEL states: "Distributed under Creative Commons Attribution-ShareAlike / CC BY - NC - SA", beside a BY-NC-SA badge.
Who can watch
Tweens profiles and older. How courses are placed

All the lectures

  1. An Introduction to CAD Video
  2. Input Output Devices, Raster Graphics Video
  3. Raster Graphics - I Video
  4. Raster Graphics - II Video
  5. Polygon Filling Video
  6. Windowing and Clipping Video
  7. Clipping of Polygons Video
  8. 2D Transformations Video
  9. 3D Transformations and Projection Video
  10. Perspective Projections Video
  11. Projections and Hidden Surface Removal Video
  12. Hidden Surface Removal Video
  13. Hidden Surface Removal Video
  14. Hidden Surface Removal Video
  15. Finite Element Method : An Introduction Video
  16. Galerkin's Approach Video
  17. Galerkin's Method : 1D Finite Element Method Video
  18. 1D Finite Element Problems Video
  19. 1D Finite Element Problems Video
  20. FE Problems : Solving for Q Video
  21. 1D - FE Problems : Galerkin's Approach Video
  22. Penalty Approach and Multi Point Boundary Video
  23. Quadratic Shape Functions Video
  24. 2D - FE Problems Video
  25. 2D - FE Problems (Contd.) Video
  26. 3D - FE Problems Video
  27. 3D - Tetrahedral and 2D - Quadrilateral Element Video
  28. Mesh Preparation Video
  29. Modeling of Curves Video
  30. Modeling of Curves Video
  31. Modeling of Curves Video
  32. Modeling of B-Spline Curves Video
  33. Modeling of B-spline Curves Video
  34. Surface Modeling Video
  35. Surface Modeling Video
  36. Display of Curves and Surfaces Video
  37. Solid Modeling Video
  38. Solid Modeling Video
  39. Solid Modeling Using Octrees Video
  40. Computer Aided Design Video
  41. Computer Aided Manufacturing Video
  42. What is CAD/CAM Video
  43. An Overview of Geometric Modeling Video
  44. Parametric Cubic Curve Video
  45. Parametric Bezier Curve Video
  46. B-Spline Curve Video
  47. Parametric Surfaces - Part-1 Video
  48. Parametric Surfaces - Part-2 Video
  49. Solid Modeling Video
  50. Geometric & Product Data Exchange Video
  51. Reverse Engineering Video