Course10510516263 lectures
Design of Steel Structures
Prof. Damodar Maity · IIT Kharagpur
About
The course deals with design of steel structures using “Limit State Design Method”. The design methodology is based on the latest Indian Standard Code of Practice for general construction (IS 800:2007). The subject covers all the necessary components such as material specifications, connections and elementary design of structural members for designing industrial steel structures. The course provides material specifications and design considerations. It provides relevant material properties of different types of steel. It deals with two types of connections namely welded and bolted connections. The advantages and limitations of these two methods of connections are also spelt out. Eccentric connections due to different plane of loading for both bolt and weld are discussed. The course also comprises of analysis and design procedure of steel members under axial tension. Design of compression members, built-up compression members along with the batten and lacing systems are explained in in this course. It deals with the design procedures of flexural members having laterally supported and laterally unsupported beams. It comprises of design of various types of column bases which transfers different kind of loads from super structures to underneath soil. Design of gantry girder with reference to industrial applications is also demonstrated.
INTENDED AUDIENCE : Civil Engineering
INDUSTRY SUPPORT – LIST OF COMPANIES/INDUSTRY THAT WILL RECOGNIZE/VALUE THIS ONLINE COURSE:
TATA Steel, SAIL, HSCL, EPIL, Jinadal Steel & Power, NBCC, RITES Limited, STUP Consultancy, MN Dastur Co. Ltd., TRF Ltd., Thyssenkrupp, WBHDC Ltd, PWD, CPWD etc.
Lectures
Week 1
- Lecture 1: Introduction to Design of Steel Structures (Limit State Method)
- Lecture 2: Steel as a Structural Material
- Lecture 3: Limit State Design
- Lecture 4: Introduction to Connections
- Lecture 5: Introduction to Bolt Connections
Week 2
- Lecture 6: Design of Ordinary Black Bolts
- Lecture 7: Worked out Examples on Design of Ordinary Black Bolts
- Lecture 8: Design of High Strength Friction Grip Bolts
- Lecture 9: Weld connection
- Lecture 10: Design of Fillet Welds
Week 3
- Lecture 11: Design of Butt Welds
- Lecture 12: Design of Plug and Slot Weld
- Lecture 13: Eccentric Connection (Load Lying in Plane of Bolted Joint)
- Lecture 14: Design of Eccentric Connection (Load Lying in Plane of Bolted Joint)
- Lecture 15: Eccentric Connection (Load Lying in Plane of Welded Joint)
Week 4
- Lecture 16: Eccentric Connection (Load Lying Perpendicular to Plane of Bolted Joint)
- Lecture 17: Design of Eccentric Connection (Load Lying Perpendicular to Plane of Bolted Joint)
- Lecture 18: Eccentric Connection (Load Lying Perpendicular to Plane of Welded Joint)
- Lecture 19: Tension Members and Net Area
- Lecture 20: Calculation of Net Area in Tension Member
Week 5
- Lecture 21: Calculation of Net Area in Tension Member
- Lecture 22: Strength Calculation of Tension Member
- Lecture 23: Strength of Tension Members with Weld Connection
- Lecture 24: Steps for Design of Tension Members
- Lecture 25: Design Calculation of Tension Members
Week 6
- Lecture 26: Design of Gusset Plate
- Lecture 27: Lug Angles
- Lecture 28: Splices in Tension Members
- Lecture 29: Compression Members
- Lecture 30: Design Strength of Compression Members
Week 7
- Lecture 31: Compressive Strength
- Lecture 32: Compressive Strength of Angle Struts
- Lecture 33: Compressive Strength of Double Angles
- Lecture 34: Design of Compression Members
- Lecture 35: Design of Builtup Compression Members
Week 8
- Lecture 36: Lacing Systems
- Lecture 37: Design of Lacing Systems
- Lecture 38: Connection Design of Lacing Systems
- Lecture 39: Design of Double Lacing System
- Lecture 40: Batten Plates
Week 9
- Lecture 41: Design of Batten Plates using Bolt Connection
- Lecture 42: Design of Batten Plates using Weld Connection
- Lecture 43: Design of Column Splices
- Lecture 44: Design of Column Splices due to Shear
- Lecture 45: Introduction to Flexural Member
Week 10
- Lecture 46: Failure Modes of Flexural Member
- Lecture 47: Laterally Supported Beams
- Lecture 48: Design of Laterally Supported Beams
- Lecture 49: Laterally supported beam with high shear
- Lecture 50: Laterally unsupported beams
- Lecture 51: Strength Calculation of Laterally Unsupported Beams
Week 11
- Lecture 52 : Design of Laterally Unsupported Beams
- Lecture 53 : Calculation of Plastic Section Modulus
- Lecture 54 : Purlins
- Lecture 55: Design of Purlins
- Lecture 56 : Introduction to Gantry Girders
- Lecture 57 : Design of Gantry Girder
Week 12
Syllabus and materials
At NPTEL, as the course publishes them.
Credits and licence
- Institution
- IIT Kharagpur
- Department
- Civil Engineering
- Teacher
- Prof. Damodar Maity
- Level
- Undergraduate
- Language
- English
- Subjects
- Engineering
- Source
- NPTEL
- Licence
- CC BY-NC-SA, as NPTEL states it. Non-commercial use only. NPTEL's terms
- Attribution
- NPTEL states: "Distributed under Creative Commons Attribution-ShareAlike / CC BY - NC - SA", beside a BY-NC-SA badge.
- Who can watch
- NPTEL gives no rating. Invisible Network shows it to Tweens profiles and older, judged from what the source says about it. How courses are placed