Learn · Advanced Reaction Engineering
Lecture 34 of 60Week 7
SS Non Isothermal reactor design_Multiple Steady States
Prof. Taraknath Das · IIT Roorkee
Credits and licence
- From
- Advanced Reaction Engineering, IIT Roorkee (at NPTEL)
- Licence
- CC BY-NC-SA, as NPTEL states it. Non-commercial use only.
- Attribution
- NPTEL states: "Distributed under Creative Commons Attribution-ShareAlike / CC BY - NC - SA", beside a BY-NC-SA badge.
- Who can watch
- Tweens profiles and older. How courses are placed
All the lectures
- Introduction
- Introduction_Various Reactors_BR
- Design Equation_Continuous reactor (CSTR_PFR_PBR)
- Design Equation_Continuous reactor (CSTR_PFR_PBR)_Sizing
- Reaction Rate with Conversion, Temperature, and pressure (Batch/Flow system)
- Space time Space velocity and CSTRs in series/parallel
- Effect of Pressure Drop on reactor design (PBR)_ (X vs W) and (P vs W)
- Effect of Pressure Drop on Reactor design (PBR)_(X vs W)_ (P vs W)
- Effect of Pressure Drop in PBR reactor_Analytical solution of Differential equation
- Effect of Pressure Drop in PBR reactor_Analytical solution for Reaction With Pressure drop
- Effect of Pressure Drop in PBR reactor_Example
- Differential Reactor_rate of reaction_catalyst deactivation
- Catalyst deactivation
- Catalyst Deactivation_Temperature (T) –Time (t) trajectories
- Moving Bed Reactor_Catalyst deactivation
- STTR_Catalyst deactivation
- Multi phase reactors-1: Slurry reactor-1
- Multi phase reactors-1: Slurry reactor-2
- Multi phase reactors-1: Slurry reactor-3
- Multi phase reactors-2: Trickle bed reactor-1
- Multi phase reactors-2: Trickle bed reactor-2
- Multi phase reactors-2: Trickle bed reactor-3
- Bioreactor_Cell Growth and Rate laws
- Bioreactors_Stoichiometry_Yield coefficients_rate of substrate consumption, product formation and secondary nutrient
- Bioreactors_Example_Yield coefficients and rate law parameters estimation
- Bioreactors_Mass Balances (Cell, Substrate, product)
- Bioreactors_Chemostats
- Steady State Non Isothermal reactor design_EB equation
- Steady State Non Isothermal reactor design_Example
- SS Non Isothermal reactor design_Reaction with Heat Exchange
- SS Non Isothermal reactor design_Heat Exchange_ T-profile for a few cases
- SS Non Isothermal reactor design_Equilibrium conversion
- SS Non Isothermal reactor design_Optimum feed temperature
- SS Non Isothermal reactor design_Multiple Steady States
- SS Non Isothermal reactor design_Ignition Extinction Curves
- SS Non Isothermal reactor design_Runaway reaction in a CSTR
- SS Non Isothermal reactor design_Energy Balance:Multiple rxn in a CSTR/PFR (Examples)
- Non-ideal flow-1
- Basics of Non-ideal flow-2
- Basics of Non-ideal flow-3
- Non-ideal flow-Segregation model
- One parameter Model-Tank in Series model (TIS)
- Non-ideal flow-Dispersion model: Part 1
- Non-ideal flow-Dispersion model: Part 2
- Non-ideal flow-Dispersion model: Part 3
- Two parameter Models-Modeling real reactors with Combinations of Ideal Reactors
- Solid Catalyzed Reaction: Reaction and Diffusion: Part 1
- Solid Catalyzed Reaction: Reaction and Diffusion: Part 2
- Solid Catalyzed Reaction: Reaction and Diffusion: Part 3
- Catalysis and Catalytic Reactors: Part 1
- Catalysis and Catalytic Reactors: Part 2
- Catalysis and Catalytic Reactors: Part 3
- Collection and Analysis of Rate: Part 1
- Collection and Analysis of Rate: Part 2
- Collection and Analysis of Rate: Part 3
- Polymath and ODE solver
- Catalyst synthesis: Part-1
- Catalyst synthesis: Part-2
- Catalyst Characterization Techniques: BET, Pore size, Pore volume
- Catalyst Characterization Techniques