Learn · Foundations on Rubber Science, Technology and Manufacturing
Lecture 22 of 69Week 5
Lecture 22 : General Purpose Rubber: Natural Rubber-1
Prof. Santanu Chattopadhyay · IIT Kharagpur
Credits and licence
- From
- Foundations on Rubber Science, Technology and Manufacturing, IIT Kharagpur (at NPTEL)
- Licence
- CC BY-NC-SA, as NPTEL states it. Non-commercial use only.
- Attribution
- NPTEL states: "Distributed under Creative Commons Attribution-ShareAlike / CC BY - NC - SA", beside a BY-NC-SA badge.
- Who can watch
- Tweens profiles and older. How courses are placed
All the lectures
- Lecture 01:History and Importance of Rubber, Rubber Plantation: Cultivation and Harvesting, Challenges in Natural Rubber Production
- Lecture 02: Types of Rubber: Natural vs Synthetic,vs Specialty Rubbers
- Lecture 03: Applications of Rubber in Various Industries
- Lecture 04: Hyper-elasticity, Thermo-elasticity and Viscoelasticity: Three Basics Attributes of Rubbers
- Lecture 05: Structure-Property Correlation
- Lecture 06: Polymerization of Rubbers: Synthesis and Techniques
- Lecture 07: "Modification of Rubbers: Chemical modification, TPE and blending"
- Lecture 08: Vulcanization of Rubbers: Sulfur based Curing
- Lecture 09: Vulcanization of Rubbers: Peroxide and Other Curing System
- Lecture 10: Physical Testing: Static & Dynamic Mechanical Testing
- Lecture 11: Thermal Properties of Rubbers/Elastomers
- Lecture 12: Origin of Elasticity and Thermo-elasticity
- Lecture 13: Physics of Rubber Elasticity
- Lecture 14: Physics of Viscoelasticity – 1
- Lecture 15: Physics of Viscoelasticity – 2
- Lecture 16: "Basics of Rheology of Rubbers and Practical Demonstration on Rubber Process Analyzer, Parallel Plate Rheometer, Mooney Viscometer, ODR and MDR
- Lecture 17: Rubber Compounding: Introduction to Rubber Compounding, its Significance, Types of Compounding Ingredients
- Lecture 18: Rubber Compounding: Anti-degradants (Antioxidants and Antiozonants)
- Lecture 19: Rubber Compounding: Fillers Reinforcing, Non-reinforcing, Special Fillers (Rubber Nanocomposites)
- Lecture 20: Rubber Compounding: Plasticizers and Process Oils
- Lecture 21: Rubber Compounding: Flame Retardants and Miscellaneous Ingredients
- Lecture 22 : General Purpose Rubber: Natural Rubber-1
- Lecture 23 : General Purpose Rubber: Natural Rubber-2 and Synthetic Isoprene Rubber
- Lecture 24 : General Purpose Rubber: Styrene-Butadiene Rubber (SBR)
- Lecture 25 : General Purpose Rubber: Isobutylene-Isoprene Rubber (IIR) / Butyl Rubber
- Lecture 26 : General Purpose Rubber: NBR (Nitrile Butadiene Rubber), HNBR (Hydrogenated NBR), and XNBR (Carboxylated NBR)
- Lecture 27 : General Purpose Rubber: Butadiene Rubber (BR)
- Lecture 28 : General Purpose Rubber: Chloroprene Rubber / Neoprene (CR)
- Lecture 29 : General Purpose Rubber: Ethylene Propylene Diene Monomer (EPDM) and Other Unsaturated Hydrocarbon Homopolymer Rubbers (Polypentenamers, Polyoctenamers, and Polynorbornenes)
- Lecture 30: Specialty Rubbers: Silicone Rubber (Q or VMQ)
- Lecture 31: Specialty Rubbers: Acrylic and Other Rubbers with Ester Side Chain ACM (Acrylic Copolymer Rubber), AEM (Ethylene Acrylate Rubber)
- Lecture 32: Specialty Rubbers: Polyurethane Rubbers
- Lecture 33: Specialty Rubbers: Fluoro Rubber (FKM) and Polyphosphazenes
- Lecture 34: Specialty Rubbers: Thermoplastic Rubber (TPR)
- Lecture 35: Specialty Rubbers: Thermoplastic Vulcanizates (TPV)
- Lecture 36: Specialty Rubbers: Miscellaneous Rubbery Materials (Polysulfides, Polyethers, and Halogenated Polyethylenes)
- Lecture 37: Rubber Processing: Mastication and Rubber Processing Stages
- Lecture 38: Mixing and Processing on Two-Roll Mill
- Lecture 39: Two-Roll Mill: Effect of Different Parameters
- Lecture 40: Internal Mixer
- Lecture 41: Moulding Equipment's
- Lecture 42: Engineering on Rubber Products: Tyres
- Lecture 43: Engineering on Rubber Products: Conveyer Belt
- Lecture 44: Engineering on Rubber Products: Transmission Belt
- Lecture 45: Engineering on Rubber Products: Hoses and Seals
- Lecture 46: Engineering on Rubber Products: Rubber Springs: Mounts and Isolators
- Lecture 47: Miscellaneous Rubber Products and Testing Procedures
- Lecture 48: Composites and its types
- Lecture 49: Reinforcement: Particulate
- Lecture 50: Reinforcement: Fiber
- Lecture 51 Synergism in Properties: Mechanical, Electrical and Morphological
- Lecture 52: Textile Technology: Fundamentals & Basic Terminology
- Lecture 53 : Application of Textiles in Rubbers Industry (Rubber to Fabric Adhesion and Surface Treatment Included) and Practical Demonstration on Tensile, Tear, Compression, Hardness, Tension set, and Hysteresis...
- Lecture 54: Concept of Adhesion
- Lecture 55: Adhesion Parameters: Surface Energy, Surface Roughness, and Spreading Coefficient
- Lecture 56: Rubber-based Adhesion Science and Technology
- Lecture 57: Rubber-based Adhesion Science and Technology
- Lecture 58: Rubber to Metal Bonding
- Lecture 59: Practical Demonstration on Adhesion
- Lecture 60: Finite Element Analysis (FEA) and its Application in the Manufacturing of Rubber Products
- Lecture 61: Hyper Elastic Models and their Applications in Simulation
- Lecture 62: Die Design & Modelling for Predicting Flow Behavior
- Lecture 63: FEA Based Damage Model and Lifetime Estimation
- Lecture 64: Demonstration on FEA in Rubber Metal Bonding
- Lecture 65: Current Advancements in Rubber
- Lecture 66: Innovations In Rubber Processing Techniques Possibilities of 3-D Printing
- Lecture 67: Computational Modelling in Rubber Technology
- Lecture 68: Role of Rubber in Sustainable Development Biodegradable and Green Rubber Regulatory
- Lecture 69: "Industry Academia collaborations carer Opportunities and Start-up"