Learn · Fluidization Engineering
Lecture 10 of 31Week 4: Frictional Pressure Drop Characteristics
Lecture 10: Analysis of Frictional Pressure Drop in Fluidized Bed by Different Models
Prof. Subrata Kumar Majumder · IIT Guwahati
Credits and licence
- From
- Fluidization Engineering, IIT Guwahati (at NPTEL)
- Licence
- CC BY-NC-SA, as NPTEL states it. Non-commercial use only.
- Attribution
- NPTEL states: "Distributed under Creative Commons Attribution-ShareAlike / CC BY - NC - SA", beside a BY-NC-SA badge.
- Who can watch
- Tweens profiles and older. How courses are placed
All the lectures
- Lecture 1: Introduction
- Lecture 2: Particle Properties
- Lecture 3: Particle/Powder Classifications
- Lecture 4: Minimum Fluidization Velocity: Fluid-solid System
- Lecture 5: Minimum Fluidization Velocity: Liquid-solid & Gas-liquid-solid System
- Lecture 6: Flow regime & its map: Gas-solid Fluidization
- Lecture 7: Flow regime & its map: Liquid-solid & Gas-liquid-solid Fluidization
- Lecture 8: Frictional pressure drop in fluidized bed - fluid-solid system
- Lecture 9: Frictional pressure drop in fluidized bed - Gas-liquid-solid system
- Lecture 10: Analysis of Frictional Pressure Drop in Fluidized Bed by Different Models
- Lecture 11: Gas Distribution Through Distributor
- Lecture 12: Calculation of gas pumping power consumption in fluidized bed
- Lecture 13: Bubbling Fluidization Part-1: Bubble Characteristics
- Lecture 14: Bubbling Fluidization Part-2: Bubble Characteristics (Contd.)
- Lecture 15: Bubbling Fluidization-Part 3: Bubble coalescence in three-phase fluidization
- Lecture 16: Bubbling Fluidization-Part 4: Bubble breakup in three-phase fluidization
- Lecture 17: Bubbling Fluidization-Part 5: Gas and solid movements at bubble
- Lecture 18: Bubbling Fluidization-Part 6: Slugging Bed
- Lecture 19: Entrainment Characteristics (Part 1)
- Lecture 20: Entrainment Characteristics (Part 2) Fast fluidization condition
- Lecture 21: Elutriation Characteristics
- Lecture 22: Attrition in Fluidized Bed (Part 1)
- Lecture 23: Attrition in Fluidized Bed (Part 2)
- Lecture 24: Solid movement, mixing: Gas-fluidized bed
- Lecture 25: Solid segregation: Gas-fluidized bed
- Lecture 26: Solid mixing and segregation: Liquid-solid fluidized bed
- Lecture 27: Gas Dispersion and Interchange
- Lecture 28: Mass transfer in fluidized bed-Gas-solid system
- Lecture 29: Mass transfer in fluidized bed-Gas-liquid-solid system
- Lecture 30: Heat transfer Characteristics
- Lecture 31: Fluidized bed reactor design and its performance