14.03: Exercise 3: Adding Variety and Visual Interest

Digital Foundations: Introduction to Media Design with Adobe Creative Cloud · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY-NC-SA 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    14.03: Exercise 3: Adding Variety and Visual Interest

    Now we’ll work with refining some of our type styles, adding visual contrast to help the reader more easily distinguish the various parts of text in our spread, and giving a little flair to the design.

    1. With the Type tool, select the words “Construction Industry Job Fair” in the bottom text frame, then change the following settings to visually set it apart as a subheading:
      • Set the font to Minion Pro Semibold, 24pt type with 24pt leading
      • Change color to Navy Blue (C=100 M=90 Y=10 K=0)

      Lastly, break the subheading into two lines using a soft return. Your work should resemble the sample image below.

      Screen capture showing the result of this step's formatting instructions. The words "Construction Industry Job Fair" are formatted in a larger type size and a different color from the main body text, visually separating the two and creating a visual hierarchy.

    2. Unlock your image layer and make sure it’s your active layer. Using the Line Tool, draw a horizontal rule between the left edge of the picture to the right edge of the word “Fair”, aligning the line vertically with the top of the letter “r”. Using the Stroke and Swatches panels, turn the rule into a 4pt dotted line with a red color. Lock the image layer again when you’re finished.

      Screen capture showing a dotted red line placed next to the words "Job Fair". The InDesign® Layers panel is also shown, with the line object located in the "image" layer created in a previous exercise in this chapter.

    3. Change the text color of the intro paragraph to 60% gray (hint: select that text frame and change the tint of the black in your swatches panel – make sure you’re adjusting the Type color!)
      Screen capture showing the layout's intro paragraph after changing its text color to a 60% gray.
    4. In the headline of your spread, select the text “A Room with a” and set its color to Navy Blue (C=100 M=90 Y=10 K=0). Select the word “View” in your headline and set its color to [Paper], then save your work.

      Screen capture showing the layout's headline with the word "View" set in white.


    14.03: Exercise 3: Adding Variety and Visual Interest is shared under a CC BY-NC-SA 4.0 license and was authored, remixed, and/or curated by LibreTexts.