11.3: Controlling access

Workplace Safety for US Workers · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    11.3: Controlling access

    Controlled Access Zones

    Definition

    A Controlled Access Zone is an area in which certain work, such as overhead bricklaying, may take place without the use of a guardrail system, personal fall arrest system or safety net system. The access to the area where the work is performed is strictly controlled.

    Requirements

    If controlled access zones are used they must meet all of the following conditions:

    1. When a controlled access zone is in place the area must be defined by control lines or any other means to restrict access.
    2. Control lines shall consist of ropes, wires, tapes, or the equivalent.
    3. Each control line must be marked at six feet intervals with a high visibility material.

    Training

    Requirements

    Employers must provide fall protection training for every employee who might be exposed to fall hazards. The training must include recognition of fall hazards and steps to minimize the hazards. The following areas must be covered in the fall protection training:

    1. The nature of fall hazards in the work area.
    2. The correct procedures for installing, maintaining, disassembling and inspecting fall protection systems.
    3. The use and operation of controlled access zones and guardrail, personal fall arrest, safety net, warning line and safety monitoring systems.
    4. The role of each employee in a safety monitoring system.
    5. The limitations of mechanical equipment used during the performance of roofing work.
    6. The correct procedures for equipment and material handling and storage and the erection of overhead protection.
    7. The employee's role in fall protection plans.

    This page titled 11.3: Controlling access was last modified on Sat, 02 Apr 2022 20:07:18 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Kimberly Mosley (ASCCC Open Educational Resources Initiative (OERI)) .