7.2: Spatial Attention and Posner Cueing Task Lab

Physiological Psychology Lab Manual · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY-NC-SA 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    7.2: Spatial Attention and Posner Cueing Task Lab

    Spatial Attention and the Posner Cueing Task Lab

    Introduction

    Spatial attention allows us to selectively focus on information appearing in different locations within our visual field. Although we often associate attention with directing our eyes toward something, we can also shift our attention without moving our eyes. This is called covert attention.

    The Posner cueing task investigates how directing attention toward a particular location influences reaction time. In this experiment, a visual cue appears shortly before a target. When the cue and target appear in the same location, the cue is considered valid. When they appear in different locations, the cue is considered invalid.

    Valid cues generally produce faster reaction times because attention has already been directed toward the target's location. Invalid cues may produce slower reaction times because attention must be redirected to another location.

    In this lab, you will complete a computerized Posner cueing experiment, analyze your reaction times using Excel or Google Sheets, and create a graph to visualize how spatial attention influences your responses.

    Learning Objectives

    By the end of this lab, you should be able to:

    1. Explain the role of spatial attention in visual processing.
    2. Distinguish between valid and invalid attentional cues.
    3. Calculate and compare mean reaction times across experimental conditions.
    4. Create and interpret a graph displaying experimental results.
    5. Explain how the parietal cortex contributes to spatial attention and how damage to this region can affect attention.

    Materials Needed

    Part 1: The Posner Cueing Experiment

    In this experiment, you will respond to visual targets appearing on either side of your screen.

    Each trial may begin with an X appearing in one of two boxes. Shortly afterward, a green circle containing the word GO will appear. Your task is to respond to the location of the GO signal, not the X.

    • Press A when the GO signal appears in the left box.
    • Press L when the GO signal appears in the right box.

    The experiment includes 100 trials. In approximately 75% of trials, the cue and target appear in the same location (valid cues). In approximately 25% of trials, they appear in different locations (invalid cues).

    Procedure

    1. Open the PsyToolkit Posner Cueing Experiment using the link provided above.
    2. Read the instructions on the website carefully.
    3. Select the option to run the demonstration.
    4. Position yourself comfortably in front of your computer. Keep your eyes directed toward the center of the screen throughout the experiment.
    5. Complete all 100 trials, responding as quickly and accurately as possible.
    6. When the experiment ends, select the option to display your response times.
    7. Copy the experimental data displayed on the screen.
    8. Open a new spreadsheet in Microsoft Excel or Google Sheets.
    9. Paste your experimental data into the spreadsheet. Save the spreadsheet so you can use it for the next part of the lab.

    Part 2: Analyzing Reaction Times

    Your experimental data contain information about the location of each cue and target, whether the cue was valid or invalid, your reaction time, and whether your response was correct.

    The PsyToolkit data contain six columns:

    Column Measurement
    A Cue position
    B Target position
    C Cue validity (cued or uncued)
    D Cue validity as a number (1 = valid, 0 = invalid)
    E Reaction time (milliseconds)
    F Response status (1 = correct, 2 = incorrect, 3 = timeout)

    If your data appear in a single column after pasting, separate them into six columns using Excel's Text to Columns feature or Google Sheets' Split text to columns feature. The values are separated by spaces or other whitespace.

    Procedure

    1. Check that each trial occupies one row and that the six measurements appear in separate columns.
    2. If necessary, insert a new row above your data and add the column headings listed in the table above.
    3. Locate Column D, which identifies valid and invalid trials, and Column E, which contains reaction times.
    4. Locate Column F, which identifies whether each response was correct. Only correct responses should be included when calculating mean reaction times.
    5. Use Column D to identify valid (1) and invalid (0) trials. Use Column F to identify correct responses (1). Only include correct responses when calculating your averages.
    6. Filter your spreadsheet to display only valid trials with correct responses. Select the corresponding reaction times in Column E. In Excel, look at the status bar at the bottom of the window to find the average of the selected cells. In Google Sheets, select the cells, click the calculation menu at the bottom right of the window, and choose Average. Record this value in Table 1.
    7. Repeat this process for invalid trials with correct responses. Record the average reaction time in Table 1.
    8. Calculate the cueing effect using the following formula:

    Cueing Effect = Mean Invalid Reaction Time − Mean Valid Reaction Time

    1. Record your calculated cueing effect in Table 1.

    Table 1. Posner Cueing Experiment Results

    Measurement Result (ms)
    Mean reaction time — Valid cues  
    Mean reaction time — Invalid cues  
    Cueing effect  

    A positive cueing effect indicates that responses were slower during invalid trials, consistent with the expected effect of spatial attention. A negative value indicates that responses were faster during invalid trials.

    Part 3: Graphing Your Results

    Graphs allow researchers to visualize patterns in experimental data. In this activity, you will create a bar graph comparing your mean reaction times for valid and invalid cues.

    Procedure

    1. In Excel or Google Sheets, create a two-column summary table containing the cue conditions and their corresponding mean reaction times.
    2. Highlight the summary table, including the column headings.
    3. Select Insert, then Chart (Google Sheets) or Insert, then Column or Bar Chart (Excel).
    4. Select a vertical column chart displaying one bar for each experimental condition.
    5. Give your graph the title "Mean Reaction Time by Cue Validity."
    6. Label the horizontal axis "Cue Validity" and the vertical axis "Mean Reaction Time (ms)."
    7. Check that your graph contains two bars representing the mean reaction times for valid and invalid cues.
    8. Copy your completed graph into your lab report or save it as an image.

    Lab Report

    Answer the following questions using your experimental results and the concepts discussed in the background reading.

    1. Compare your mean reaction times for valid and invalid cues. Which condition produced faster responses? Were your results consistent with the expected Posner cueing effect?

       

       

       

       

    2. Explain why valid cues generally produce faster reaction times than invalid cues. In your explanation, discuss how spatial attention influences the processing of visual information.

       

       

       

       

    3. What is covert attention? Explain how the Posner cueing task allows researchers to investigate shifts in attention without requiring participants to move their eyes.

       

       

       

       

    4. Describe the role of the parietal cortex in spatial attention. How does this region contribute to directing attention toward different locations in the visual field?

       

       

       

       

    5. Hemispatial neglect can occur following damage to the parietal cortex. Explain how this condition affects spatial attention and predict how someone with left-sided hemispatial neglect might perform on the Posner cueing task.

       

       

       

       

    6. Insert and examine the graph you created. What does the difference between the two bars indicate about the relationship between cue validity and reaction time? Explain how the graph helps communicate your experimental findings.

       

       

       

       

       

       

       

       

    7. Identify the independent and dependent variables in the Posner cueing experiment. Explain how comparing reaction times across cue conditions allows researchers to investigate spatial attention.

       

       

       

       

    8. Identify two factors that could influence reaction times during this experiment, such as distractions, fatigue, or familiarity with the task. Explain how these factors might affect the interpretation of your results.

       

       

       

       


    This page titled 7.2: Spatial Attention and Posner Cueing Task Lab was last modified on Fri, 23 Oct 2026 01:34:13 GMT and is shared under a CC BY-NC-SA 4.0 license and was authored, remixed, and/or curated by Hartrisha Kaur Uchida.