From LibreTexts, under CC BY-NC-SA 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.
Throughout this course, we will explore the biological processes underlying human behavior, cognition, and physiological functioning. We will examine how the nervous system responds to different stimuli, how physiological activity can be measured, and how researchers use these measurements to better understand human behavior. Some of the topics and techniques we will explore include:
Sensory Systems: How we detect, process, and interpret information from our environment.
Electroencephalography (EEG) and Visual Evoked Potentials (VEP): How researchers measure electrical activity in the brain.
Reflexes and Nerve Conduction: How electrical signals travel through the nervous system and produce responses.
Galvanic Skin Response (GSR): How changes in skin conductance reflect physiological arousal.
Vagal Tone: How the autonomic nervous system influences physiological functioning.
Skin Temperature: How changes in skin temperature relate to physiological regulation.
Heart Rate and Respiration: How cardiovascular and respiratory activity respond to different conditions.
Electromyography (EMG): How electrical activity in muscles can be measured/analyzed.
How Will We Conduct Labs Online?
In a traditional laboratory setting, students use specialized equipment to collect physiological measurements and conduct experiments. Because this course is offered online and asynchronously, we will use a combination of at-home experiments, virtual simulations, and existing physiological datasets to explore many of the same concepts.
Although you will not have access to all the equipment used in a traditional biopsychology laboratory, you will still have opportunities to engage in the scientific process. Depending on the activity, you may:
Conduct simple experiments using everyday household materials.
Collect and record observations or measurements.
Use online simulations to explore physiological processes.
Analyze and interpret data collected from physiological experiments.
Develop hypotheses and evaluate experimental results.
Apply concepts from biopsychology to explain your findings.
The goal of these activities is not simply to learn about physiological psychology techniques, but to understand how researchers use these techniques to investigate questions about the brain, nervous system, and behavior.
These instructions outline the activities you will complete for this lab and include the questions you will need to answer. You will submit your work directly in Canvas, where you will have space to type or paste your responses and upload any required files, such as graphs, drawings, or images. For your convenience, spaces are provided for recording your answers in the lab instructions, but you are not required to fill in your answers on this document.
Lab Protocols and Safety
Although you will be completing your laboratory activities at home, it is important to follow appropriate experimental procedures and safety guidelines.
Read all instructions before beginning an activity. Make sure you understand the procedures, materials, and expectations before starting.
Follow the procedures carefully. Accurate observations and measurements depend on consistent experimental methods.
Use materials safely. Only use the materials specified in the instructions. Do not substitute potentially hazardous materials or attempt procedures requiring specialized equipment.
Choose an appropriate environment. Complete your activities in a safe, comfortable space with minimal distractions.
Be mindful of your physical well-being. Some activities may involve sensory stimulation or physical responses. If an activity causes discomfort, stop immediately.
Record your observations accurately. Report what you actually observe, even if your results differ from what you expected. Unexpected findings are a normal part of scientific research.
Do not fabricate data. If you are unable to complete an activity or obtain a measurement, explain the difficulty or reach out to your professor rather than inventing results.
Remember that the purpose of laboratory research is to investigate questions systematically. Following instructions, collecting accurate data, and interpreting your findings are essential components of the scientific process.
In this lab, you will investigate how your sensory systems detect and respond to information from the environment. You will conduct simple experiments to examine visual perception and sensory adaptation. Throughout these activities, you will collect observations, record measurements, and use your results to better understand how sensory information is processed. Before beginning, review the sensory systems material in your lab textbook.
Materials Needed:
Paper and pen or pencil
Ruler with millimeter measurements
Timer or stopwatch (a smartphone timer is acceptable)
Computer or tablet screen
A quiet, comfortable workspace
In laboratory research, psychologists attempt to understand behavior by observing responses under specific conditions. Controlling variables helps researchers determine whether changes in an outcome are associated with the condition being studied. In the following activities, you will manipulate aspects of visual stimulation, record your observations, and consider how experimental conditions influence your results.
Experiment 1: Measuring Your Blind Spot
Each eye contains an area of the retina where the optic nerve exits the eye. This region lacks photoreceptors, creating a blind spot in your visual field. In this experiment, you will locate your blind spot, estimate its size, and investigate how your brain processes missing visual information.
Procedure:
Using a blank sheet of paper, draw an X on the left side and an O approximately 50 millimeters (5 centimeters) to its right, as illustrated below.
Position the paper approximately 30 centimeters in front of your face, keeping it at eye level.
Cover your left eye and look directly at the X with your right eye.
While maintaining your focus on the X, gradually adjust the distance between your face and the paper. Notice when the O disappears from your field of vision.
Using a ruler, measure the distance from your eye to the paper at the point where the O disappears. Record your measurement in millimeters.
Create additional circles with diameters of 5, 10, 15, and 20 millimeters. Test each circle using the same procedure, keeping the distance between the X and the center of each circle consistent. Identify the largest circle that disappears completely.
Switch eyes and repeat the experiment, placing the O to the left of the X while focusing on the X with your left eye.
Enter your measurements for each eye in the table below. You will use these values to estimate the size of your blind spot.
Right Eye
Left Eye
Largest Circle that Disappeared
mm
mm
Distance from Eye to Paper
mm
mm
After identifying the largest circle that disappears, draw a straight line connecting the X to the circle and extending beyond it, as shown below.
Repeat the experiment, positioning the circle within your blind spot while continuing to focus on the X.
What happens to the line when the circle disappears? You may notice that the line appears uninterrupted, even though part of it falls within your blind spot. This occurs because the optic disc contains no photoreceptors, and your visual system uses surrounding information to perceptually fill in the missing portion of the image.
Calculating the Size of Your Blind Spot:
Use the formula below to estimate the diameter of your blind spot on the retina. The calculation uses the diameter of the largest circle that disappeared and the distance between your eye and the paper.
Your calculation will look like this:
\[ \text{Blind Spot (mm)} = 20 \times \frac{\text{Diameter of Largest Image that Disappears (mm)}}{\text{Distance to the Eye (mm)}} \]
Show your work for both calculations in your lab report assignment. The calculations must clearly show what you determine your blind spot to be on each side.
Experiment 2: Visual Afterimages
Visual afterimages occur when a visual sensation persists or changes after the original stimulus is removed. In this experiment, you will observe how the duration of exposure to a visual stimulus influences your perception of an afterimage.
For this activity, use a moderately bright colored image displayed on a computer or tablet screen. Do not use the sun, flashlights, or other intense light sources. Avoid this experiment if visual stimulation triggers migraines or other symptoms.
Procedure:
Create a solid-colored square (approximately 5 centimeters wide) on a white background using a drawing program or presentation slide. Choose a saturated color such as red, green, or blue. Alternatively, you can search “negative color afterimage illusion” on Google, YouTube, or another search engine.
Position yourself comfortably in front of the screen. Keep your viewing distance and screen brightness consistent throughout the experiment.
Look directly at the center of the colored square for 5 seconds.
Immediately shift your gaze to a blank white area of the screen or a white wall.
Observe any afterimage that appears. Record its color and use a timer to measure approximately how long it remains visible.
Rest your eyes for at least one minute, or until your vision has returned to normal.
Repeat the procedure using the same image, screen brightness, and viewing distance. This time, look at the colored square for 20 seconds.
Record the color and duration of the afterimage.
Report your findings in your lab report.
Experiment 3: Eye Dominance
Although we use both eyes to perceive the world, many people demonstrate a preference for one eye when performing certain visual tasks. This is known as ocular dominance.
Procedure:
Hold both hands in front of you with your arms extended.
Overlap your hands to create a small triangular opening between your thumbs and index fingers.
With both eyes open, look through the opening and center a distant object, such as a clock or picture on the wall.
Without moving your hands, close your left eye and observe whether the object remains centered.
Open your left eye and close your right eye. Again, observe whether the object remains centered.
Determine which eye keeps the object centered within the opening. This is your dominant eye.
Record your dominant eye. If the result is unclear, repeat the procedure, making sure to keep your hands stationary while alternating eyes.
Lab Report
This add fixed lines that are not deletable by LibreTexts bots. Can select from 1 to 10 lines to fix
This add fixed lines that are not deletable by LibreTexts bots. Can select from 1 to 10 lines to fix
This add fixed lines that are not deletable by LibreTexts bots. Can select from 1 to 10 lines to fix
Fill out the table below with your results from experiment 2.
5-second exposure
20-second exposure
Original stimulus color:
Original stimulus color:
Afterimage color:
Afterimage color:
Afterimage duration:
Afterimage duration:
This add fixed lines that are not deletable by LibreTexts bots. Can select from 1 to 10 lines to fix
This add fixed lines that are not deletable by LibreTexts bots. Can select from 1 to 10 lines to fix
This add fixed lines that are not deletable by LibreTexts bots. Can select from 1 to 10 lines to fix
This add fixed lines that are not deletable by LibreTexts bots. Can select from 1 to 10 lines to fix