2: Processing the Data from One Participant in the ERP CORE N400 Experiment

Applied Event-Related Potential Data Analysis 2e · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY-NC 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    2: Processing the Data from One Participant in the ERP CORE N400 Experiment
    Learning Objectives

    In this chapter, you will learn to:

    • Load EEG data
    • Create an EventList, which stores information about events such as stimuli and responses
    • Assign events to bins with BINLISTER
      • A bin is a set of ERP waveforms, one for each channel, that were created by averaging together a set of trials
    • Parse the continuous EEG into a series of discrete epochs (e.g., from -200 to +800 ms relative to stimulus onset) and perform baseline correction
    • Perform simple artifact rejection
    • Compute and plot averaged ERP waveforms
    • Filter EEG and ERP data
    • Make difference waves

    This chapter goes through a simple example experiment so you can see the basic steps involved in processing the data from a single participant. The experiment is from the ERP CORE (Kappenman et al., 2021), and it is designed to isolate the N400 component that is elicited when a word is semantically unrelated to a previous word (e.g., SHOE when it’s preceded by TREE instead of by SOCK).

    In this chapter, we’ll go through the most basic EEG processing steps (e.g., epoching, baseline correction, artifact detection) and create averaged ERPs for a single participant. In the next chapter, we’ll process additional participants, measure the N400 amplitude, and do a simple statistical analysis. The details of these steps will be described in later chapters, along with important details about how Matlab and ERPLAB Studio work. The present chapter and the next chapter are designed for you to get the big picture of how the data are processed and learn the basics of using ERPLAB Studio. You can also find an overview of an entire EEG processing pipeline in Appendix 3.

    If you’re already experienced with ERPLAB Studio, you can just skim through this chapter. But if you don’t have much ERPLAB Studio experience, you’ll want to download the data and do each data processing exercise. Remember, you’ll probably run into some error messages or other technical snags, but don’t get discouraged. An important goal of this book is for you to learn how to troubleshoot technical problems. See the troubleshooting tips in Appendix 2 if you have problems.


    This page titled 2: Processing the Data from One Participant in the ERP CORE N400 Experiment was last modified on Thu, 01 Oct 2026 18:52:26 GMT and is shared under a CC BY-NC 4.0 license and was authored, remixed, and/or curated by Steven J Luck directly on the LibreTexts platform.