5: Referencing and Other Channel Operations

Applied Event-Related Potential Data Analysis 2e · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY-NC 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    5: Referencing and Other Channel Operations
    Learning Objectives

    In this chapter, you will learn to:

    • Avoid the incorrect assumption that an ERP waveform primarily reflects signals from the active electrode site and instead recognize that the waveform equally reflects signals from the active and reference sites
    • Compute the absolute voltage at the scalp electrodes given the internal generator voltage and the propagation weights between the generator and the scalp sites
    • Compute the voltage between each electrode site and the ground electrode given the absolute voltages at each site
    • Compute the referenced voltage at each site given the voltage between each site and the ground electrode
    • Re-reference the voltage to another site
    • Use simple algebra to determine the correct equations for re-referencing your data
    • Use two alternatives to referencing your data, namely current density and global field power
    • Implement several different reference schemes and alternatives to referencing in ERPLAB Studio with the Channel Operations panel
    • Implement common referencing scenarios using a script

    This chapter dives deeper into Channel Operations, especially with respect to how the reference electrode works and how you can re-reference your data. Once you know what you’re doing, re-referencing the data will take you just a few seconds, and many researchers don’t give it much thought. However, the reference has an enormous impact on your ERP waveforms, so you really need to understand what you’re doing when you reference or re-reference your data.

    The exercises in this chapter are designed to give you greater insight into what the reference site does, why we need to reference the data, and how re-referencing the data can clarify or obfuscate the results depending on what new reference you choose. We’ll also discuss the mechanics of re-referencing in eStudio so that you can have confidence that you’re doing it correctly.

    We’ll start with simulated data so that you can see how the original and referenced data on the scalp are related to the underlying neural generator. The simulations use Excel rather than eStudio, which makes it easier to see exactly what’s going on. You can use Google Sheets instead of Excel, if you prefer. I’m assuming that you know the basics of spreadsheets, including how an equation in one cell can be used to compute a value on the basis of the values stored in other cells.


    This page titled 5: Referencing and Other Channel Operations was last modified on Thu, 01 Oct 2026 18:52:26 GMT and is shared under a CC BY-NC 4.0 license and was authored, remixed, and/or curated by Steven J Luck directly on the LibreTexts platform.