7.E: Work and Power (Problems)

Physics: A Foundation for Scientists and Engineers · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    7.E: Work and Power (Problems)

    Difficulty key: ★ introductory, ★★ standard, ★★★ challenging.

    Section 7.1 — Work Done by a Constant Force

    7.1 ★ A worker pushes a \(18\,\mathrm{kg}\) crate \(4.0\,\mathrm{m}\) across a level floor with a horizontal force of \(55\,\mathrm{N}\).

    1. How much work does the worker do?
    2. If instead the force is applied at \(30^\circ\) below the horizontal with the same magnitude, how much work is done over the same distance?

    7.2 ★ [Conceptual.] A satellite moves in a circular orbit at constant speed.

    1. How much work does gravity do on the satellite over one full orbit? Explain in terms of the angle between force and displacement.
    2. Does the satellite’s energy change over the orbit? Explain.

    7.3 ★★ A \(25\,\mathrm{kg}\) sled is pulled at constant velocity across level snow by a rope inclined \(30^\circ\) above the horizontal. The coefficient of kinetic friction is \(\mu_k = 0.12\), and the sled moves \(15\,\mathrm{m}\).

    1. Draw the free-body diagram for the sled.
    2. Use Newton’s laws to find the tension in the rope and the normal force on the sled.
    3. Find the work done on the sled by each of the four forces.
    4. What is the net work? Does the sled’s energy change?

    7.4 ★★ A \(4.0\,\mathrm{kg}\) box is pushed across a level floor by a \(40\,\mathrm{N}\) force directed \(35^\circ\) below the horizontal. The coefficient of kinetic friction is \(0.25\).

    1. Draw the free-body diagram and find the normal force. Why is it larger than the box’s weight?
    2. Find the net force on the box.
    3. How far must the box be pushed for its energy to increase by \(60\,\mathrm{J}\)?

    7.5 ★★ A \(30\,\mathrm{kg}\) box rides in the bed of a pickup truck. The truck accelerates from a stop sign at \(1.5\,\mathrm{m/s^2}\) for \(40\,\mathrm{m}\), and the box does not slip.

    1. Draw the free-body diagram for the box. Which force gives it its forward acceleration?
    2. Find the magnitude and direction of that force.
    3. How much work does it do on the box (as seen from the ground) over the \(40\,\mathrm{m}\)? Does the box’s energy increase or decrease?

    7.6 ★★ Two forces act on a hockey puck as it slides across frictionless ice: \(\vec{F}_1 = (4.0\,\hat{\imath} + 3.0\,\hat{\jmath})\,\mathrm{N}\) and \(\vec{F}_2 = (-2.0\,\hat{\imath} + 5.0\,\hat{\jmath})\,\mathrm{N}\). During the time they act, the puck’s displacement is \(\vec{d} = (3.0\,\hat{\imath} - 1.0\,\hat{\jmath})\,\mathrm{m}\).

    1. Find the work done by each force, using the dot product in component form.
    2. What is the net work? By how much, and in which direction, does the puck’s energy change?
    3. Find the angle between \(\vec{F}_1\) and \(\vec{d}\).

    7.7 ★★ [Real-world: transportation.] A \(1200\,\mathrm{kg}\) car traveling on a level road slams on its brakes. The wheels lock, and the car skids \(25\,\mathrm{m}\) before stopping. The coefficient of kinetic friction between the tires and the road is \(0.60\).

    1. Draw the free-body diagram for the car during the skid, and use Newton’s laws to find the normal force and the friction force.
    2. Find the work done on the car by friction, by gravity, and by the normal force during the skid.
    3. What is the net work? Describe what happens to the car’s energy, and where that energy goes.

    7.8 ★ [Conceptual.] A weightlifter holds a \(100\,\mathrm{kg}\) barbell motionless over her head for \(5\,\mathrm{s}\).

    1. How much work does she do on the barbell during those \(5\,\mathrm{s}\)? Explain using \(W = Fd\cos\theta\).
    2. Can the net work on an object be zero even though several of the forces on it do nonzero work? Give an example from this section.

    Section 7.2 — Work Done by Gravity

    7.9 ★★ A \(1200\,\mathrm{kg}\) elevator is lowered \(8.0\,\mathrm{m}\) at constant speed.

    1. How much work does gravity do on the elevator?
    2. How much work does the supporting cable do?
    3. What is the net work?

    7.10 ★★ [Real-world: sports.] A \(7.3\,\mathrm{kg}\) shot-put is pushed \(0.55\,\mathrm{m}\) along a straight line directed \(40^\circ\) above the horizontal, by a \(310\,\mathrm{N}\) force applied along that same line.

    1. How much work does the athlete do on the shot during this push?
    2. How much work does gravity do during the same push?

    7.11 ★ [Real-world: hiking.] A \(70\,\mathrm{kg}\) hiker follows a switchback trail \(2.5\,\mathrm{km}\) long to the top of a ridge \(450\,\mathrm{m}\) above the trailhead.

    1. How much work does gravity do on the hiker during the climb?
    2. Why does the length of the trail not matter?
    3. How much work does gravity do on the hiker over the round trip, back to the trailhead?

    7.12 ★★ A \(3.0\,\mathrm{kg}\) block slides \(2.5\,\mathrm{m}\) down a ramp inclined at \(30^\circ\). The coefficient of kinetic friction is \(0.20\).

    1. Draw the free-body diagram and find the normal force and the friction force.
    2. Find the work done on the block by gravity, the normal force, and friction.
    3. What is the net work, and by how much does the block’s energy change?

    7.13 ★★ A \(50\,\mathrm{kg}\) crate is dragged \(4.0\,\mathrm{m}\) up a ramp inclined at \(20^\circ\), at constant speed, by a rope parallel to the ramp. The coefficient of kinetic friction is \(0.30\).

    1. Use Newton’s second law to find the tension in the rope.
    2. Find the work done on the crate by the rope, gravity, friction and the normal force.
    3. Show that the net work is zero, and explain why it must be.

    7.14 ★★ An \(8.0\,\mathrm{kg}\) crate is released from rest on a ramp inclined at \(25^\circ\), and slides down it. The coefficient of kinetic friction is \(0.15\).

    1. Find the net force on the crate along the ramp.
    2. How far down the ramp has the crate slid when its energy has increased by \(100\,\mathrm{J}\)?
    3. Over that distance, how much work does gravity do, and how much does friction do?

    7.15 ★★ A crane lifts an \(800\,\mathrm{kg}\) load \(15\,\mathrm{m}\) straight up with a constant upward acceleration of \(0.60\,\mathrm{m/s^2}\).

    1. Find the tension in the cable.
    2. Find the work done on the load by the cable and by gravity.
    3. By how much does the load’s energy change?
    4. If the load were instead lifted the same height at constant speed, how much work would the cable do?

    7.16 ★ A \(1.5\,\mathrm{kg}\) ball is carried from the floor up to a shelf \(2.0\,\mathrm{m}\) high by two routes: straight up, and along a ramp twice as long.

    1. Find the work done by gravity for each route.
    2. Explain why the two answers agree, using Figure 7.3.

    Section 7.3 — Work Done by a General Force

    7.17 ★ A spring has a force constant of \(240\,\mathrm{N/m}\).

    1. What force is needed to stretch it \(0.15\,\mathrm{m}\)?
    2. How much work is required to stretch it that far from its relaxed length?

    7.18 ★★ [Graph-reading.] A variable force acts on an object as it moves along the \(x\)-axis. The graph shows the force versus position.

    A graph of a variable force in newtons versus position in meters.Figure descriptionA graph of a variable force in newtons versus position in meters. The force rises in a straight line from 0 at x equals 0 to 4 newtons at x equals 2 meters, stays at 4 newtons until x equals 4 meters, then falls in a straight line to 0 at x equals 5 meters. The work done is found as the area under the curve.
    1. Find the work done by the force from \(x=0\) to \(x=2\,\mathrm{m}\).
    2. Find the work done from \(x=0\) to \(x=5\,\mathrm{m}\) (the total area under the graph).
    3. If this is the only force that does work on the object, by how much does the object’s energy change between \(x = 0\) and \(x = 5\,\mathrm{m}\)? Between \(x = 4\,\mathrm{m}\) and \(x = 5\,\mathrm{m}\)?

    7.19 ★★ [Conceptual.] A spring is stretched a distance \(x\) and then stretched a further equal distance \(x\) (to a total of \(2x\)).

    1. Is the work needed for the second stretch equal to, greater than, or less than the work for the first? Justify using \(\tfrac{1}{2}kx^2\).
    2. Explain why the answer makes sense in terms of the force–position graph.

    7.20 ★★ A \(2.0\,\mathrm{kg}\) mass is hooked to the bottom of a vertical spring (\(k = 150\,\mathrm{N/m}\)) at its relaxed length, then lowered slowly by hand until it hangs at rest on its own.

    1. Draw the free-body diagram for the mass when it finally hangs at rest, and use it to find how far the spring stretches.
    2. Find the work done on the mass by gravity and by the spring during the lowering.
    3. How much work does the hand do? What is the net work?

    7.21 ★★ A block on a frictionless horizontal surface is attached to a spring (\(k = 400\,\mathrm{N/m}\)). The block moves from a position where the spring is compressed \(0.10\,\mathrm{m}\) to one where it is stretched \(0.050\,\mathrm{m}\).

    1. How much work does the spring do on the block?
    2. The block then moves back from the stretched position to the relaxed length. How much work does the spring do on it over this stage?
    3. Over which part of the first stage does the spring do positive work, and over which part negative? Explain without calculation.

    7.22 ★★ A thick rubber cord does not obey Hooke’s law. Stretched a distance \(x\) from its relaxed length, it pulls back with a force of magnitude \(F = ax + bx^3\), where \(a = 50\,\mathrm{N/m}\) and \(b = 800\,\mathrm{N/m^3}\).

    1. How much work is required to stretch the cord \(0.20\,\mathrm{m}\) from its relaxed length?
    2. How much would be required if the cord obeyed Hooke’s law with \(k = a\)? Which term dominates at this stretch?
    3. What force is needed to hold the cord at \(x = 0.20\,\mathrm{m}\)?

    Section 7.4 — Power

    7.23 ★ A motor does \(3600\,\mathrm{J}\) of work in \(12\,\mathrm{s}\). What is its average power output, in watts and in horsepower?

    7.24 ★★ [Real-world: engineering.] A pump raises \(200\,\mathrm{kg}\) of water per minute from a well \(15\,\mathrm{m}\) deep.

    1. How much work is done against gravity each minute?
    2. What is the minimum power the pump must supply?

    7.25 ★ [Conceptual.] Two cranes lift identical loads to the same height, but crane A does it in half the time of crane B.

    1. Which crane does more work? Which delivers more power? Explain.
    2. A small motor can still raise a very heavy load given enough time. Explain how this is possible, in terms of work and power.

    7.26 ★★ [Real-world: biology.] A \(75\,\mathrm{kg}\) student climbs a flight of stairs, rising \(4.5\,\mathrm{m}\), in \(6.0\,\mathrm{s}\) at a steady pace.

    1. How much work does gravity do on the student?
    2. What average power must the student’s legs deliver to raise her body? Express it in watts and in horsepower.
    3. How does the power change if she runs up the same stairs in \(3.0\,\mathrm{s}\)?

    7.27 ★★ A \(900\,\mathrm{W}\) electric winch drags a \(120\,\mathrm{kg}\) crate up a ramp inclined at \(15^\circ\), pulling on a cable parallel to the ramp. The coefficient of kinetic friction is \(0.25\).

    1. Draw the free-body diagram and find the cable tension needed to move the crate at constant speed.
    2. If the winch runs at its full \(900\,\mathrm{W}\), how fast does the crate move?
    3. How long does it take to drag the crate \(10\,\mathrm{m}\) up the ramp?

    7.28 ★★ An elevator motor can deliver \(25\,\mathrm{kW}\). The car and its load have a combined mass of \(1200\,\mathrm{kg}\), and a constant friction force of \(1500\,\mathrm{N}\) opposes the motion.

    1. What is the greatest constant speed at which the motor can raise the car?
    2. At that speed, how long does it take to rise \(30\,\mathrm{m}\)?

    7.29 ★★ [Real-world: transportation.] A boat’s engine delivers \(50\,\mathrm{kW}\) to the propeller while the boat cruises at a steady \(12\,\mathrm{m/s}\).

    1. What is the drag force of the water on the boat? (Explain why the forward thrust equals the drag.)
    2. If the drag force is proportional to \(v^2\), what power would be needed to cruise at \(15\,\mathrm{m/s}\)?

    7.30 ★★★ [Real-world: sports.] A cyclist and bicycle of combined mass \(70\,\mathrm{kg}\) travel at a steady \(8.0\,\mathrm{m/s}\) against a total resistive force of \(40\,\mathrm{N}\).

    1. What power must the cyclist supply to maintain this speed on level ground?
    2. What additional power is needed to climb a \(5.0\,\mathrm{\%}\) grade (rising \(5.0\,\mathrm{m}\) per \(100\,\mathrm{m}\) traveled) at the same speed?

    Challenge Problems

    7.31 ★★★ A crate of mass \(m\) is dragged at constant velocity a distance \(d\) across a level floor (coefficient of kinetic friction \(\mu_k\)) by a rope at an angle \(\theta\) above the horizontal.

    1. Use Newton’s laws to show that the tension is \(F_T = \dfrac{\mu_k mg}{\cos\theta + \mu_k\sin\theta}\).
    2. Show that the work done by the rope is \(W_T = \dfrac{\mu_k mgd}{1 + \mu_k\tan\theta}\).
    3. Show that the tension is smallest when \(\tan\theta = \mu_k\). For \(m = 50\,\mathrm{kg}\), \(\mu_k = 0.40\) and \(d = 10\,\mathrm{m}\), find that angle, the minimum tension, and the work done by the rope at that angle. Compare with pulling horizontally.
    4. According to (b), the rope’s work keeps decreasing as \(\theta\) increases, even past the angle of least tension. Explain why, in terms of the normal force and the work done by friction.

    7.32 ★★★ A single horizontal force \(F(x) = (12 - 3x^2)\,\mathrm{N}\) (with \(x\) in meters) acts on an object that starts at the origin on a frictionless surface. No other force does work on it.

    1. By integrating, find the work done by \(F\) as the object moves from \(x = 0\) to \(x = 1.0\,\mathrm{m}\).
    2. At what position is the object’s energy greatest? Explain, and find by how much its energy has increased there.
    3. At what position (beyond the origin) has its energy returned to its starting value?
    4. Sketch \(F(x)\) for \(0 \le x \le 3.5\,\mathrm{m}\) and shade the areas that correspond to your answers to (b) and (c).

    7.33 ★★★ [Real-world: transportation.] A loaded \(20000\,\mathrm{kg}\) truck has an engine that can deliver at most \(300\,\mathrm{kW}\) to the wheels. Rolling resistance is a constant \(1960\,\mathrm{N}\), and air drag is \(F_D = \tfrac12 C\rho A v^2\) with \(C = 0.70\), \(\rho = 1.2\,\mathrm{kg/m^3}\) and \(A = 8.0\,\mathrm{m^2}\).

    1. Show that on level ground the top speed satisfies \((1960 + 3.36\,v^2)\,v = 3.00\times 10^{5}\) in SI units, and solve it numerically.
    2. Find the top speed when climbing a \(5.0\,\mathrm{\%}\) grade (rising \(5.0\,\mathrm{m}\) per \(100\,\mathrm{m}\) of road).
    3. At that speed, how long does it take the truck to climb a mountain pass \(600\,\mathrm{m}\) high?
    4. On the grade, what fraction of the engine’s power goes into the work against gravity?

    This page titled 7.E: Work and Power (Problems) was last modified on Thu, 12 Nov 2026 04:26:46 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Michael Ragsdale.