Opening the book…
To make the idea precise we start macroscopically. The entropy \(S\) of a system is a state variable: like pressure or internal energy, it depends only on the current state, not on how the system got there. Its change during a reversible process is defined by
Key Equation: Entropy change (reversible)
\[dS = \frac{dQ_r}{T} \qquad\Longrightarrow\qquad \Delta S = \int \frac{dQ_r}{T}, \tag{38.1}\]
where \(dQ_r\) is the heat added in a reversible step and \(T\) is the (kelvin) temperature at which it is added. The units of entropy are joules per kelvin (\(\,\mathrm{J/K}\)). Adding heat to a system raises its entropy; removing heat lowers it. And because the temperature sits in the denominator, the same amount of heat changes the entropy more when added at a low temperature than at a high one: a point that will turn out to be the secret behind the second law.
That entropy is a state function is the key that unlocks everything. If a process carries a system from one state to another and back again, the total entropy change must be zero, since it returns to the same state. We will exploit this repeatedly.
A Statistical View of Entropy
The macroscopic definition tells us how to compute entropy but not what it is. The answer comes from counting. Distinguish two ways of describing a system. A macrostate is the large-scale description: the pressure, volume, and temperature you could actually measure. A microstate is the complete microscopic description: the exact position and motion of every single particle. Many different microstates look identical at the macroscopic level, and the number of microstates that correspond to a given macrostate is its multiplicity \(W\).
For a simple model (\(N\) particles free to be on either side of a divided box) the multiplicity of the macrostate with \(n_1\) on the left and \(n_2\) on the right is the number of ways to choose which particles go where,
\[W = \frac{N!}{n_1!\,n_2!}. \tag{38.2}\]
Try it with a handful of particles and a pattern emerges (Figure 38.1): the “evenly split” macrostate, \(n_1 = n_2\), has by far the largest multiplicity, while the “all on one side” macrostates have multiplicity \(1\). As \(N\) grows to the astronomical numbers in real gases, the evenly split macrostate so utterly dominates that the system is essentially never found anywhere else.
Ludwig Boltzmann found the bridge between this counting and the thermodynamic entropy of §38.1. It is one of the most important equations in physics, engraved on his tombstone:
Key Equation: Boltzmann’s entropy
\[S = k_B \ln W, \tag{38.3}\]
where \(k_B = 1.38\times 10^{-23}\,\mathrm{J/K}\) is Boltzmann’s constant. Entropy is, quite literally, a measure of the number of microscopic arrangements available to a system. And now the second law writes itself: a system left to itself drifts toward the macrostate of largest multiplicity simply because that macrostate has the most ways of happening. The entropy increases not because some force pushes it up, but because larger-\(W\) states are overwhelmingly more probable. There is no physical law driving the increase, only the weight of numbers.
Irreversible Processes
The distinction between reversible and irreversible processes is central, and equation (38.1) applies, strictly, only to the reversible kind.
A reversible process is one that can be run backward without leaving any trace on the surroundings. It requires that the system stay infinitesimally close to equilibrium at every instant: pressures and temperatures changed by vanishingly small steps, infinitely slowly. No real process is truly reversible; it is an idealization, approached by very slow, gentle changes. An irreversible process is everything else: everything real. A gas rushing into a vacuum, heat flowing across a finite temperature difference, a ball bouncing to rest: none can be undone without changing the wider world.
Here is the difficulty, and its elegant resolution. We can only compute entropy change with \(\int dQ_r/T\) along a reversible path, yet the processes we care about are irreversible. The rescue is that entropy is a state function: its change depends only on the initial and final states, not on the path between them. So to find the entropy change of an irreversible process, we invent any convenient reversible path with the same endpoints, compute \(\int dQ_r/T\) along that imaginary path, and the answer is the entropy change of the real process too.
Changes in Entropy
Let us put the method to work.
Example 38.1: Entropy of melting
A solid of latent heat of fusion \(L_f\) melts at temperature \(T_m\).
- Find the entropy change when a mass \(m\) melts.
- Estimate it for a small ice cube.
Solution
(a) Melting happens at the constant temperature \(T_m\), so \(T\) comes out of the integral and the heat is just \(Q = mL_f\):
\[\Delta S = \int \frac{dQ_r}{T} = \frac{1}{T_m}\int dQ = \frac{Q}{T_m} = \boxed{\frac{mL_f}{T_m}}.\]
(b) For a \(25\,\mathrm{g}\) ice cube, with \(L_f = 3.33\times 10^{5}\,\mathrm{J/kg}\) and \(T_m = 273\,\mathrm{K}\),
\[\Delta S = \frac{(0.025)(3.33\times10^5)}{273} \approx \boxed{30\,\mathrm{J/K}}.\]
The entropy rises, as it must: a disordered puddle of liquid has many more available microstates than the orderly crystal of ice.
Example 38.2: Entropy from mixing water
\(1.00\,\mathrm{kg}\) of water at \(0.00^{\circ}\mathrm{C}\) is mixed with an equal mass at \(100^{\circ}\mathrm{C}\). The mixture settles at \(50^{\circ}\mathrm{C}\). Find the total entropy change. (Water \(c = 4186\,\mathrm{J/(kg\cdot K)}\).)
Solution
The mixing is irreversible, so we route each mass along a reversible warming or cooling path, where \(dQ_r = mc\,dT\) and thus \(\Delta S = \int mc\,dT/T = mc\ln(T_f/T_i)\). Working in kelvin (\(T_{\rm cold} = 273\), \(T_{\rm hot} = 373\), \(T_f = 323\)):
\[\Delta S_{\rm cold} = mc\ln\frac{T_f}{T_{\rm cold}} = (1.00)(4186)\ln\frac{323}{273} = +704\,\mathrm{J/K},\]
\[\Delta S_{\rm hot} = mc\ln\frac{T_f}{T_{\rm hot}} = (1.00)(4186)\ln\frac{323}{373} = -602\,\mathrm{J/K}.\]
The total is
\[\Delta S = 704 - 602 = \boxed{+102\,\mathrm{J/K}}.\]
The cold water’s entropy rises more than the hot water’s falls, so the net change is positive, exactly what the second law demands for a spontaneous, irreversible process. Notice the asymmetry traces back to the \(T\) in the denominator: the cold water gains its heat at lower temperatures, where each joule buys more entropy.
Example 38.3: Free expansion: two views agree
An ideal gas undergoes an adiabatic free expansion to four times its initial volume. (In a free expansion the gas rushes into a vacuum, doing no work and exchanging no heat, so its temperature is unchanged.)
- Find the entropy change by the macroscopic method.
- Find it by the statistical method, and show the two agree.
Solution
(a) The free expansion is irreversible, so we replace it with a reversible isothermal expansion between the same two states (same \(T\), volume \(V_i \to 4V_i\)). For an isothermal ideal-gas process \(\Delta E_{\rm int} = 0\), so the heat added reversibly equals the work done by the gas, \(Q_r = nRT\ln(V_f/V_i)\). Then
\[\Delta S = \frac{Q_r}{T} = nR\ln\frac{V_f}{V_i} = \boxed{nR\ln 4}.\]
(b) Statistically, each molecule independently has \(4\) times as much volume to occupy, so the multiplicity grows by a factor \(4\) per molecule: \(W_f/W_i = 4^N\). By Boltzmann’s relation,
\[\Delta S = k_B\ln\frac{W_f}{W_i} = k_B\ln\big(4^N\big) = Nk_B\ln 4 = nR\ln 4,\]
using \(Nk_B = nR\). The macroscopic and microscopic routes give \(\boxed{\text{the same answer}}\): a striking confirmation that thermodynamic entropy really is Boltzmann’s count of microstates.
Checkpoint 38.1
A \(1.0\,\mathrm{kg}\) block of ice melts completely at \(0^{\circ}\mathrm{C}\), absorbing \(3.33\times 10^{5}\,\mathrm{J}\) of heat. (a) What is its change in entropy? (b) Why is this one of the few cases where the integral in equation (38.1) can be done without calculus? (c) Does the ice’s entropy increase or decrease, and why does that make sense microscopically?
Answers to Checkpoints
Checkpoint 38.1. (a) The melting happens at a constant \(T = 273\,\mathrm{K}\), so \(\Delta S = Q/T = (3.33\times10^5\,\mathrm{J})/(273\,\mathrm{K}) \approx 1.22\times 10^{3}\,\mathrm{J/K}\). (b) Because the temperature stays fixed throughout the phase change, \(1/T\) is a constant that comes outside the integral, leaving \(\int dQ_r = Q\). (Melting at the melting point is also reversible, as the definition requires.) (c) It increases, as it must with heat flowing in. In the solid, each molecule is locked into a place in the crystal; in the liquid the molecules can wander and arrange themselves in vastly more ways, so the multiplicity, and with it \(S = k_B\ln W\), rises.
This page titled 38.1: Entropy was last modified on Thu, 12 Nov 2026 04:27:09 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Michael Ragsdale.
The book could not be loaded just now.