27.1: Displacement Current

Physics: A Foundation for Scientists and Engineers · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    27.1: Displacement Current
    A parallel-plate capacitor being charged, drawn side-on with two vertical plates.
    Figure 27.1. Ampère’s original law fails for a charging capacitor. The loop around the wire bounds the flat surface \(S_1\), which the current pierces, and the bulging surface \(S_2\), which passes between the plates where no charge flows. Through \(S_2\) passes only a changing electric field.
    Figure descriptionA parallel-plate capacitor being charged, drawn side-on with two vertical plates. A wire from the left carries current i into the left plate, and a wire on the right carries current i away from the right plate. Between the plates, horizontal electric field lines point from the left plate to the right plate and are growing stronger. A loop encircles the wire to the left of the capacitor. Surface S sub 1 is a flat disk spanning the loop, pierced by the wire. Surface S sub 2 has the same boundary loop but bulges to the right into the gap between the plates, so no wire passes through it; only the changing electric field does.

    Ampère’s law (Chapter 23) relates the magnetic field around a closed loop to the current passing through it:

    \[\oint\vec{B}\cdot d\vec{s} = \mu_0 i_{\text{enc}}.\]

    Here \(i_{\text{enc}}\) means the current through any surface bounded by the loop. For a steady current in a wire, every such surface is pierced by the same wire, and the choice does not matter. But consider a capacitor that is charging (Figure 27.1). A current \(i\) flows in the wire toward one plate and away from the other, yet no charge crosses the gap between the plates. Draw a loop around the wire. For the flat surface \(S_1\) bounded by that loop, the wire passes through and \(i_{\text{enc}} = i\). For the bulging surface \(S_2\), which has the same boundary but passes between the plates, nothing passes through, and \(i_{\text{enc}} = 0\). Ampère’s law gives two different answers for the same loop. It cannot be complete.

    What does pass through \(S_2\) is electric field, and it is changing. As charge \(q\) builds up on plates of area \(A\), the field between them grows as \(E = q/\epsilon_0 A\) (Section 16.3), so the electric flux through the gap is \(\Phi_E = EA = q/\epsilon_0\). Its rate of change is

    \[\frac{d\Phi_E}{dt} = \frac{1}{\epsilon_0}\frac{dq}{dt} = \frac{i}{\epsilon_0}.\]

    The quantity \(\epsilon_0\,d\Phi_E/dt\) is therefore exactly equal to the current \(i\) in the wire. Maxwell called it the displacement current,

    Key Equation: Displacement current

    \[i_d = \epsilon_0\,\frac{d\Phi_E}{dt}, \tag{27.1}\]

    and added it to the current in Ampère’s law. With it, the surface \(S_1\) encloses a conduction current \(i\) and the surface \(S_2\) encloses a displacement current \(i_d = i\), and the two agree. The repaired law is the Ampère–Maxwell law:

    \[\oint\vec{B}\cdot d\vec{s} = \mu_0\left(i_{\text{enc}} + \epsilon_0\frac{d\Phi_E}{dt}\right). \tag{27.2}\]

    Despite its name, the displacement current is not a flow of charge. It is a changing electric field, and the new law says that a changing electric field produces a magnetic field, exactly as a current does. This is the mirror image of Faraday’s law (Chapter 24), in which a changing magnetic field produces an electric field. That symmetry is about to have dramatic consequences.

    Example 27.1: The magnetic field inside a charging capacitor

    A capacitor with circular plates of radius \(R = 5.0\,\mathrm{cm}\) is being charged by a steady current of \(2.0\,\mathrm{A}\). (a) At what rate is the electric field between the plates changing? (b) Find the magnetic field between the plates at a distance \(r = 3.0\,\mathrm{cm}\) from the central axis, and (c) outside the plates at \(r = 10\,\mathrm{cm}\).

    Solution

    (a) The field between the plates is \(E = q/\epsilon_0 A\), so

    \[\frac{dE}{dt} = \frac{i}{\epsilon_0 A} = \frac{2.0}{(8.85\times10^{-12})\pi(0.050)^2} = \boxed{2.9\times 10^{13}\,\mathrm{V/(m\cdot s)}}.\]

    (b) By symmetry, the magnetic field circles the axis and has the same magnitude all around a circle of radius \(r\). Apply the Ampère–Maxwell law to that circle. There is no conduction current between the plates, but the displacement current is spread uniformly over the plate area, so a circle of radius \(r < R\) encloses the fraction \(r^2/R^2\) of it:

    \[B(2\pi r) = \mu_0\,i\,\frac{r^2}{R^2} \qquad\Longrightarrow\qquad B = \frac{\mu_0 i\,r}{2\pi R^2}.\]

    Numerically,

    \[B = \frac{(1.257\times10^{-6})(2.0)(0.030)}{2\pi(0.050)^2} = \boxed{4.8\times 10^{-6}\,\mathrm{T}}.\]

    (c) Outside the plates, \(r > R\), the circle encloses the whole displacement current \(i\), and

    \[B = \frac{\mu_0 i}{2\pi r} = \frac{(1.257\times10^{-6})(2.0)}{2\pi(0.10)} = \boxed{4.0\times 10^{-6}\,\mathrm{T}},\]

    exactly the field the same current would produce around a long straight wire. From outside, the gap between the plates is magnetically invisible: the displacement current continues the conduction current seamlessly across it.

    Checkpoint 27.1

    A capacitor is charging. An Ampèrian loop encircles the wire leading to one plate; an identical loop, with the same boundary, instead passes between the plates where no charge flows. Ampère’s original law gives different magnetic fields for the two loops. Which term in the Ampère–Maxwell law repairs the contradiction, and what physical quantity plays the role of the “missing” current between the plates? What happens to the displacement current once the capacitor is fully charged?

    Answer

    Answers to Checkpoints

    Checkpoint 27.1. The displacement-current term, \(\mu_0\epsilon_0\,d\Phi_E/dt\), repairs it. Between the plates no charge flows, but the electric field there is growing, and the displacement current \(i_d = \epsilon_0\,d\Phi_E/dt\) turns out to equal the conduction current in the wire exactly. Both loops then enclose the same total current and give the same magnetic field. Once the capacitor is fully charged, the field between the plates stops changing, so \(i_d = 0\), and the conduction current in the wire has also dropped to zero, so the two loops still agree.


    This page titled 27.1: Displacement Current was last modified on Thu, 12 Nov 2026 04:26:56 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Michael Ragsdale.