Opening the book…
Difficulty key: ★ introductory, ★★ standard, ★★★ challenging. Use \(\epsilon_0 = 8.85\times 10^{-12}\,\mathrm{F/m}\), \(k_e = 8.99\times 10^{9}\,\mathrm{N\cdot m^2/C^2}\), and the values in Table 19.1.
Section 19.1 — Capacitance
19.1 ★ A capacitor holds \(30\,\mathrm{\mu C}\) when connected to a \(9.0\,\mathrm{V}\) battery. Find its capacitance. How much charge would it hold on a \(1.5\,\mathrm{V}\) battery?
19.2 ★ A parallel-plate capacitor has circular plates of radius \(5.0\,\mathrm{cm}\), \(0.80\,\mathrm{mm}\) apart in air. Find its capacitance, and the charge on it when it is connected to a \(24\,\mathrm{V}\) battery.
19.3 ★★ You want to build a \(1.0\,\mathrm{nF}\) air-filled parallel-plate capacitor with a plate separation of \(0.10\,\mathrm{mm}\). What plate area do you need? Would such a capacitor fit comfortably on a desk?
19.4 ★★ [Conceptual.] A charged parallel-plate capacitor is disconnected from its battery, and the plates are pushed closer together. Does each of the following increase, decrease, or stay the same: the capacitance, the charge, the potential difference, the field between the plates?
19.5 ★★ [Real-world: electronics.] A \(20\,\mathrm{m}\) length of coaxial cable has an inner conductor of diameter \(0.90\,\mathrm{mm}\) and an outer conductor of inner diameter \(5.8\,\mathrm{mm}\), with air between. Find its capacitance.
19.6 ★★ Two concentric conducting spheres have radii \(8.0\,\mathrm{cm}\) and \(10.0\,\mathrm{cm}\). Find the capacitance of this spherical capacitor. Compare it with the capacitance of a parallel-plate capacitor with the same separation and a plate area equal to the inner sphere’s surface area, and explain why they differ by about \(25\%\) and in what limit they would agree.
19.7 ★★★ Show that when the gap \(b - a\) between the conductors of a spherical capacitor is much smaller than \(a\), equation (19.4) reduces to the parallel-plate result \(C = \epsilon_0A/d\) with \(A = 4\pi a^2\) and \(d = b - a\). Show the same for the cylindrical capacitor, using \(\ln(1 + x) \approx x\) for small \(x\).
Section 19.2 — Energy Stored in an Electric Field
19.8 ★ How much energy is stored in a \(470\,\mathrm{\mu F}\) capacitor charged to \(25\,\mathrm{V}\)?
19.9 ★ What is the energy density in the field between the plates of a capacitor where the field is \(5.0\times 10^{5}\,\mathrm{V/m}\)?
19.10 ★★ [Real-world: medicine.] A defibrillator stores \(360\,\mathrm{J}\) in a \(32\,\mathrm{\mu F}\) capacitor. (a) To what voltage is it charged? (b) If the energy is delivered in \(4.0\,\mathrm{ms}\), what is the average power?
19.11 ★★ A \(2.0\,\mathrm{\mu F}\) capacitor charged to \(100\,\mathrm{V}\) is disconnected from its battery and connected to an uncharged \(2.0\,\mathrm{\mu F}\) capacitor. (a) Find the final charge on and voltage across each. (b) Find the total stored energy before and after. (c) Where did the missing energy go?
19.12 ★★ Use the energy density to find the energy stored in the field of an isolated conducting sphere of radius \(R\) carrying charge \(Q\), by integrating \(u_E\) over all space outside the sphere. Check that your answer equals \(Q^2/2C\) with \(C = 4\pi\epsilon_0R\).
19.13 ★★★ Show that the plates of a parallel-plate capacitor attract each other with a force \(F = Q^2/(2\epsilon_0A)\). (Hint: with the battery disconnected, find how much the stored energy changes when the separation increases by \(dx\); that change equals the work \(F\,dx\) you must do.) Explain why this is not \(QE\), where \(E\) is the field between the plates.
Section 19.3 — Dielectrics
19.14 ★ A \(12\,\mathrm{pF}\) air capacitor is filled with mica. What is its new capacitance?
19.15 ★★ A parallel-plate capacitor with plates of area \(0.020\,\mathrm{m^2}\) separated by \(0.10\,\mathrm{mm}\) of Teflon is connected to a \(60\,\mathrm{V}\) battery. Find (a) its capacitance, (b) the charge on the plates, (c) the field in the Teflon, and (d) the largest voltage the capacitor can withstand.
19.16 ★★ A capacitor charged to \(200\,\mathrm{V}\) and then disconnected has a paper dielectric. The paper is carefully pulled out. What is the new voltage? By what factor does the stored energy change, and where does the extra energy come from?
19.17 ★★ [Conceptual.] Explain, in terms of polarization and induced charge, why the dielectric constant of water is so much larger than that of most plastics.
19.18 ★★★ A parallel-plate capacitor with plate area \(A\) and separation \(d\) is half filled by a dielectric slab of constant \(\kappa\) and thickness \(d/2\), lying flat against one plate. Show that its capacitance is \(C = 2\kappa\epsilon_0A/\bigl((\kappa + 1)d\bigr)\). (Hint: treat it as two capacitors in series.)
19.19 ★★★ A parallel-plate capacitor with plate area \(A\) and separation \(d\) has a dielectric slab of constant \(\kappa\) and full thickness \(d\) covering half the plate area. Find its capacitance. (Hint: two capacitors in parallel.) Compare with the previous problem for \(\kappa = 3\).
Section 19.4 — Capacitors in Parallel and in Series
19.20 ★ Find the equivalent capacitance of a \(3.0\,\mathrm{\mu F}\) and a \(6.0\,\mathrm{\mu F}\) capacitor connected (a) in parallel and (b) in series.
19.21 ★★ The two capacitors of the previous problem are connected to a \(9.0\,\mathrm{V}\) battery, first in parallel and then in series. For each connection find the charge on and voltage across each capacitor.
19.22 ★★ Three capacitors, \(1.0\,\mathrm{\mu F}\), \(2.0\,\mathrm{\mu F}\), and \(3.0\,\mathrm{\mu F}\), are available. Find all the different equivalent capacitances that can be made using all three, and state which arrangement gives each.
19.23 ★★ [Real-world: electronics.] You need a capacitor rated for \(600\,\mathrm{V}\), but you have only \(10\,\mathrm{\mu F}\) capacitors rated for \(200\,\mathrm{V}\). How can you combine them to get \(10\,\mathrm{\mu F}\) rated for \(600\,\mathrm{V}\)? How many do you need?
19.24 ★★★ In the network of Example 19.8, capacitor \(C_2\) fails and becomes a short circuit (a wire). Find the new charge on and voltage across \(C_1\) and \(C_3\), and the new total energy stored.
19.25 ★★★ [Real-world: touchscreens.] A capacitive touchscreen senses a finger because the finger changes the capacitance of a small pair of electrodes. Model one sensing element as a parallel-plate capacitor with plates \(5.0\,\mathrm{mm}\) square, \(0.50\,\mathrm{mm}\) apart, filled with glass of \(\kappa = 7.0\). (a) Find its capacitance. (b) A finger adds a parallel path equivalent to a capacitance of about \(1\,\mathrm{pF}\). By what percentage does the total capacitance change? (c) Why is a gloved finger usually not detected?
19.26 ★★★ [Real-world: computer memory.] A memory cell in a DRAM chip stores a bit as charge on a capacitor of about \(25\,\mathrm{fF}\) (\(25\times 10^{-15}\,\mathrm{F}\)) charged to \(1.0\,\mathrm{V}\). (a) How many electrons represent a stored “1”? (b) The charge leaks away slowly, so each cell must be “refreshed” about every \(64\,\mathrm{ms}\). If a cell loses \(10\%\) of its charge in that time, what average leakage current does that represent?
19.27 ★★★ Two identical parallel-plate capacitors, each of capacitance \(C\), are connected in parallel to a battery of voltage \(V\) and then disconnected. A dielectric slab of constant \(\kappa\) is then slid into one of them. Find the new voltage across the pair, the charge on each, and the change in the total stored energy.
This page titled 19.E: Capacitance (Problems) was last modified on Thu, 12 Nov 2026 04:26:47 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Michael Ragsdale.
The book could not be loaded just now.