41.7: Lasers

Physics: A Foundation for Scientists and Engineers · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    41.7: Lasers

    Every light source we have met so far (a hot filament, a glowing gas, the Sun) emits light the same way: each atom, once excited, drops to a lower level on its own and releases a photon in a random direction at a random moment. The result is a jumble of independent wavetrains. A laser is different in kind. Its light is a single, orderly wave: one wavelength, marching in step, in one direction. The name is an acronym for what makes this possible: light amplification by stimulated emission of radiation.

    Three ways light meets an atom. Consider two levels of an atom, \(E_1\) below and \(E_2\) above, and light whose photons carry exactly the difference, \(hf = E_2 - E_1\). Three processes can occur (Figure 41.11).

    • Absorption: an atom in the lower level absorbs a photon and jumps to the upper level. The photon disappears.
    • Spontaneous emission: an atom in the upper level drops to the lower level on its own, emitting a photon in a random direction with a random phase. A typical excited state lasts about \(10\,\mathrm{ns}\) before this happens.
    • Stimulated emission: a passing photon of energy \(hf\) triggers an atom already in the upper level to drop, and the emitted photon is an exact copy of the one that triggered it: the same frequency, the same direction, the same polarization, and in phase with it. One photon goes in; two identical photons come out.

    Einstein predicted stimulated emission in 1917 from a thermodynamic argument: without it, atoms bathed in thermal radiation could not reach the equilibrium that the blackbody spectrum (Chapter 39) requires. He also showed that a photon is exactly as likely to stimulate emission from an excited atom as it is to be absorbed by an unexcited one. That symmetry decides everything. Light passing through a collection of atoms is amplified if more of them are in the upper level than in the lower, and weakened if the reverse is true.

    Three panels of absorption, spontaneous emission and stimulated emission between two levels.
    Figure 41.11. The three ways light of energy \(hf = E_2 - E_1\) interacts with an atom. (a) Absorption removes a photon. (b) Spontaneous emission releases a photon in a random direction. (c) Stimulated emission: an incoming photon triggers an excited atom to emit a second photon identical to the first, so the light is amplified.
    Figure descriptionThree side-by-side panels, each showing a lower energy level E sub 1 and an upper level E sub 2 as horizontal lines, with an atom's electron drawn as a dot. Panel a, absorption: a wavy incoming photon arrow strikes an electron on the lower level, and a vertical arrow shows the electron jumping up to E sub 2; no photon leaves. Panel b, spontaneous emission: an electron on the upper level drops to the lower level on its own, and one wavy photon leaves in an arbitrary direction, angled upward. Panel c, stimulated emission: an incoming wavy photon passes an electron on the upper level, which drops to the lower level, and two identical wavy photons leave side by side in the same direction as the incoming one.

    Population inversion. In thermal equilibrium at temperature \(T\), the numbers of atoms in two levels separated by \(\Delta E = E_2 - E_1\) are in the ratio given by the Boltzmann factor:

    Key Equation: Boltzmann population ratio

    \[\frac{N_2}{N_1} = e^{-\Delta E/k_BT}. \tag{41.21}\]

    The upper level is always the less populated one, so in ordinary matter absorption always wins and light is weakened as it passes through. To build a laser we must create the opposite, unnatural situation, a population inversion with \(N_2 > N_1\), so that stimulated emission outpaces absorption.

    Example 41.7: How empty is the upper level?

    The red helium–neon laser line comes from a transition with \(\Delta E = 1.96\,\mathrm{eV}\). Find \(N_2/N_1\) for these two levels in thermal equilibrium (a) at room temperature, \(300\,\mathrm{K}\), and (b) at \(3000\,\mathrm{K}\), the temperature of a lamp filament. Use \(k_B = 8.617\times 10^{-5}\,\mathrm{eV/K}\).

    Solution

    (a) At \(300\,\mathrm{K}\), \(k_BT = (8.617\times10^{-5})(300) = 0.0259\,\mathrm{eV}\), so

    \[\frac{N_2}{N_1} = e^{-1.96/0.0259} = e^{-75.8} = \boxed{1\times10^{-33}}.\]

    In a whole mole of gas, about \(6\times10^{23}\) atoms, not even one would be in the upper level.

    (b) At \(3000\,\mathrm{K}\), \(k_BT = 0.259\,\mathrm{eV}\), and

    \[\frac{N_2}{N_1} = e^{-1.96/0.259} = e^{-7.58} = \boxed{5\times10^{-4}}.\]

    Much better, but still nowhere near an inversion. Because \(e^{-\Delta E/k_BT}\) is less than \(1\) for every positive temperature, no amount of heating can produce \(N_2 > N_1\). A population inversion requires deliberately driving the system away from thermal equilibrium.

    The atoms must be pumped into the upper level by an outside energy source: an electric discharge, a flash lamp, another laser, or an electric current. Pumping alone is not enough, though. If the upper level emptied by spontaneous emission within nanoseconds, the inversion would vanish as fast as it was built. The trick is to use a metastable state, an excited level whose spontaneous decay is unusually slow (lifetimes of microseconds to milliseconds, a million times longer than usual) because the transition is nearly forbidden by the quantum-number rules. Atoms pile up in the metastable level, and an inversion forms.

    An energy-level diagram for the helium-neon laser, with energy in electron-volts increasing upward.
    Figure 41.12. The helium–neon laser. Electron collisions in a gas discharge pump helium atoms into a metastable level at \(20.61\,\mathrm{eV}\). Collisions hand that energy to neon atoms, whose upper level at \(20.66\,\mathrm{eV}\) nearly matches it, producing a population inversion relative to the neon level at \(18.70\,\mathrm{eV}\). The \(1.96\,\mathrm{eV}\) transition between them emits red light at \(633\,\mathrm{nm}\). (The energy axis is broken between \(0\) and about \(18\,\mathrm{eV}\).)
    Figure descriptionAn energy-level diagram for the helium-neon laser, with energy in electron-volts increasing upward. On the left, helium has its ground state at 0 and a metastable level at 20.61 eV; an upward arrow labeled electron collisions in the discharge pumps helium from the ground state to this level. On the right, neon has its ground state at 0, an upper laser level at 20.66 eV, just above the helium level, and a lower laser level at 18.70 eV. A dashed horizontal arrow labeled collision carries energy from the helium metastable level across to the neon upper level. A bold downward red arrow from 20.66 to 18.70 eV is labeled laser, 633 nm. A shorter gray arrow labeled fast decay drops from the lower laser level toward neon's ground state.

    The helium–neon laser of Figure 41.12 shows how this works in practice. A glass tube holds a mixture of mostly helium with a little neon, and a high voltage drives an electric discharge through it. Electrons in the discharge knock helium atoms into a metastable level \(20.61\,\mathrm{eV}\) above the ground state. Neon happens to have a level at \(20.66\,\mathrm{eV}\), almost exactly the same energy, so when an excited helium atom collides with a neon atom, the energy hops across (the small difference comes from the atoms’ kinetic energy). Neon atoms therefore accumulate in the \(20.66\,\mathrm{eV}\) level. The level below it, at \(18.70\,\mathrm{eV}\), empties quickly, so it stays nearly vacant and the two neon levels are inverted. The transition between them releases

    \[\lambda = \frac{hc}{\Delta E} = \frac{1240\,\mathrm{eV\cdot nm}}{20.66 - 18.70\,\mathrm{eV}} = \frac{1240}{1.96}\,\mathrm{nm} = 633\,\mathrm{nm},\]

    the familiar red of a laboratory He–Ne laser.

    The optical cavity. A population inversion makes a medium that amplifies light, but the amplification in a single pass is small. So the medium is placed between two parallel mirrors, forming an optical cavity. A spontaneously emitted photon that happens to travel along the axis stimulates a copy, the two stimulate two more, and the growing pulse is reflected back and forth through the medium hundreds of times, building up an intense standing wave (Chapter 30). Photons heading off-axis simply leave through the sides. One mirror transmits a percent or so of the light, and that fraction emerges as the beam.

    The result has properties no ordinary source can match.

    • Monochromatic: every photon comes from the same transition, and the cavity selects a very narrow band of wavelengths within it.
    • Coherent: the photons are copies of one another, in phase, so the beam can produce the sharp interference patterns of Chapter 33 over large path differences.
    • Directional: only light traveling along the cavity axis is amplified, so the beam spreads only by diffraction (Chapter 34), a fraction of a milliradian for a typical laser.
    • Intense: because the power is concentrated in a narrow beam, even a milliwatt laser delivers an intensity at the eye greater than direct sunlight.

    Lasers now read barcodes and optical discs, carry the internet’s data through optical fibers, cut steel, reshape the cornea, and measure the distance to the Moon to the centimeter by timing pulses reflected from mirrors the Apollo astronauts left behind. Most of the lasers in use today are not gas tubes but tiny semiconductor diode lasers, which we meet in Chapter 42.

    Example 41.8: Photons in a laser beam

    A He–Ne laser emits \(5.0\,\mathrm{mW}\) of \(633\,\mathrm{nm}\) light in a beam \(1.0\,\mathrm{mm}\) in diameter. (a) How many photons per second does it emit? (b) What is the beam’s intensity, and how does it compare with sunlight (\(1361\,\mathrm{W/m^2}\))?

    Solution

    (a) Each photon carries

    \[E = \frac{hc}{\lambda} = \frac{1240\,\mathrm{eV\cdot nm}}{633\,\mathrm{nm}} = 1.96\,\mathrm{eV} = (1.96)(1.602\times10^{-19}\,\mathrm{J}) = 3.14\times 10^{-19}\,\mathrm{J}.\]

    The number emitted per second is the power divided by the energy per photon:

    \[\frac{N}{t} = \frac{P}{E} = \frac{5.0\times10^{-3}\,\mathrm{J/s}}{3.14\times10^{-19}\,\mathrm{J}} = \boxed{1.6\times10^{16}\,\mathrm{photons/s}}.\]

    (b) The beam’s cross-sectional area is \(\pi(0.50\times10^{-3}\,\mathrm{m})^2 = 7.9\times 10^{-7}\,\mathrm{m^2}\), so

    \[I = \frac{P}{A} = \frac{5.0\times10^{-3}}{7.9\times10^{-7}} = \boxed{6.4\times 10^{3}\,\mathrm{W/m^2}},\]

    nearly five times the intensity of full sunlight, from a device that draws a few watts. That is why you must never look into a laser beam: the eye’s lens focuses that already-intense, parallel beam onto a tiny spot on the retina.

    Checkpoint 41.6

    A beam of \(633\,\mathrm{nm}\) light passes through a tube of neon gas that is not pumped, so nearly every atom is in the lower of the two laser levels. Is the beam amplified or weakened? What changes when the discharge is switched on and the levels become inverted?

    Answer

    Answers to Checkpoints

    Checkpoint 41.6. Weakened. A \(633\,\mathrm{nm}\) photon is as likely to be absorbed by an atom in the lower level as to stimulate emission from one in the upper level, so the net effect depends on which level holds more atoms. With nearly all the atoms in the lower level, absorption wins and the beam loses photons. With the discharge on and the levels inverted, stimulated emission outpaces absorption, and each pass through the tube adds photons identical to those already in the beam: the beam is amplified.


    This page titled 41.7: Lasers was last modified on Thu, 12 Nov 2026 04:27:06 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Michael Ragsdale.