Opening the book…
We can now put the pieces together. Divide the forces acting on an object into conservative ones, which have potential energies, and nonconservative ones, which do not. The net work is the sum of their works, and by the work–kinetic energy theorem it equals the change in kinetic energy:
\[W_{\rm cons} + W_{\rm nc} = \Delta K.\]
Replace \(W_{\rm cons}\) by \(-\Delta U\) (equation (8.7)) and move it to the right-hand side:
\[W_{\rm nc} = \Delta K + \Delta U.\]
The sum of kinetic and potential energy is the mechanical energy \(E_{\rm mech} = K + U\), so this says that the mechanical energy changes by exactly the work done by the nonconservative forces:
Key Equation: Change in mechanical energy
\[\Delta E_{\rm mech} = W_{\rm nc}. \tag{8.9}\]
When no nonconservative force does work (no friction, no drag, no push from outside), \(W_{\rm nc} = 0\) and the mechanical energy stays constant:
Key Equation: Conservation of mechanical energy
\[K_i + U_i = K_f + U_f \qquad \text{(conservative forces only).} \tag{8.10}\]
This single equation links any two moments in a process. Kinetic energy and potential energy can trade back and forth as freely as they like, but their sum cannot change. When a nonconservative force such as friction does act, we keep its work in the books:
Key Equation: Energy equation with nonconservative forces
\[K_i + U_i + W_{\rm nc} = K_f + U_f. \tag{8.11}\]
Equation (8.11) is the workhorse of this chapter; equation (8.10) is just the special case \(W_{\rm nc} = 0\). For friction \(W_{\rm nc}\) is negative, so mechanical energy decreases, but the total energy, counting the thermal energy produced, is still conserved. That is the full statement of the conservation of energy, and it has never been found to fail.
Note: Strategy: solving a problem with energy
- Pick the two moments. Energy methods connect a “before” and an “after,” nothing in between. Choose the two instants where you know the most and want the most.
- Choose the \(U = 0\) level. Only changes in potential energy matter, so the reference is yours to place. Put it at the lowest point of the motion and every height in the problem comes out positive.
- Sort the forces. Each force is either conservative (it gets a \(U\) term) or nonconservative (it gets a \(W_{\rm nc}\) term). Forces perpendicular to the motion (a normal force on a fixed surface, a rope’s tension on a pendulum) do no work and get neither. A quick free-body diagram is the safest way to be sure you have them all.
- Write equation (8.11) and solve. Include a term only if it is nonzero at that moment: an object at rest has \(K = 0\); an object at the reference level has \(U_g = 0\); a relaxed spring has \(U_s = 0\).
- Check. Did the mass cancel? Should it have? Is the answer’s sign and size plausible?
Note: Why energy methods win
Consider a block released from rest at the top of a smooth, curved ramp of height \(h\), and ask for its speed at the bottom.
With Newton’s second law you are in trouble immediately. The slope changes at every point, so the direction of the normal force changes, so the acceleration is neither constant nor even in a fixed direction. There is no single free-body diagram for the whole trip, and the constant-acceleration kinematics of Chapter 2 simply do not apply. You would have to set up and integrate along the curve, and to do that you would need the curve’s equation, which the problem never gave you.
With energy the whole thing is one line. The normal force is perpendicular to the motion everywhere, so it does no work; only gravity does. Then \(mgh = \tfrac{1}{2}mv^2\), and \(v = \sqrt{2gh}\).
Notice what dropped out: the shape of the ramp, the mass of the block, and the time taken. That is the trade. Energy methods will not tell you when the block arrives or what path it took, but when the question is only about speeds, heights, and distances, they get there in a fraction of the work.
When only conservative forces act
Example 8.9: A climbing glider
A paper glider is moving at \(18\,\mathrm{m/s}\) when it is \(2.0\,\mathrm{m}\) above the ground. Gliding up to an altitude of \(5.0\,\mathrm{m}\) (and neglecting air resistance), how fast is it then moving?
Solution
Step 1: Is mechanical energy conserved? Only gravity does work (air resistance is neglected), so yes: \(K_i + U_i = K_f + U_f\), or
\[\tfrac{1}{2}mv_i^2 + mgy_i = \tfrac{1}{2}mv_f^2 + mgy_f.\]
Step 2: Cancel the mass and solve for \(v_f\). Every term contains \(m\), so divide the whole equation by \(m\). Then isolate the \(v_f\) term: subtract \(gy_f\) from both sides and multiply everything by \(2\):
\[\tfrac{1}{2}v_i^2 + g y_i = \tfrac{1}{2}v_f^2 + g y_f \;\Longrightarrow\; v_f^2 = v_i^2 + 2g y_i - 2g y_f = v_i^2 + 2g(y_i - y_f).\]
Take the square root of both sides:
\[v_f = \sqrt{v_i^2 + 2g(y_i - y_f)}.\]
Step 3: Substitute, watching the sign. The glider climbs, so \(y_i - y_f = 2.0 - 5.0 = -3.0\,\mathrm{m}\) is negative, and the height term subtracts from \(v_i^2\):
\[v_f = \sqrt{(18)^2 + 2(9.8)(-3.0)}\,\mathrm{m/s} = \sqrt{324 - 58.8}\,\mathrm{m/s} = \sqrt{265.2}\,\mathrm{m/s} \approx \boxed{16.3\,\mathrm{m/s}}.\]
The glider slows as it climbs, trading kinetic energy for potential energy, and the mass never entered the answer. Had we mixed up the order and used \(y_f - y_i = +3.0\,\mathrm{m}\), the glider would have come out faster after climbing, which is a sure sign of a sign error.
Example 8.10: A ball thrown from a building
A ball is thrown from the top of a building. When it is \(4.7\,\mathrm{m}\) above the ground it is moving at \(12\,\mathrm{m/s}\); later it is moving at \(6.2\,\mathrm{m/s}\). At what height is it then? (Neglect air resistance.)
Solution
Step 1: Set up the energy balance. Mechanical energy is conserved. As in the previous example, divide every term by \(m\):
\[\tfrac{1}{2}v_i^2 + g y_i = \tfrac{1}{2}v_f^2 + g y_f.\]
Step 2: Solve for \(y_f\). Subtract \(\tfrac{1}{2}v_f^2\) from both sides, then divide both sides by \(g\):
\[g y_f = g y_i + \tfrac{1}{2}v_i^2 - \tfrac{1}{2}v_f^2 \;\Longrightarrow\; y_f = y_i + \frac{v_i^2 - v_f^2}{2g}.\]
(Dividing \(\tfrac{1}{2}(v_i^2 - v_f^2)\) by \(g\) gives \((v_i^2 - v_f^2)/(2g)\).)
Step 3: Substitute. Square each speed before subtracting:
\[y_f = 4.7\,\mathrm{m} + \frac{(12)^2 - (6.2)^2}{2(9.8)}\,\mathrm{m} = 4.7\,\mathrm{m} + \frac{144 - 38.4}{19.6}\,\mathrm{m} = 4.7\,\mathrm{m} + 5.4\,\mathrm{m} \approx \boxed{10.1\,\mathrm{m}}.\]
A tempting slip is to subtract the speeds first, \((12 - 6.2)^2 = 33.6\), which gives a height gain of only \(1.7\,\mathrm{m}\). Kinetic energy depends on the square of the speed, and \(12^2 - 6.2^2\) is not \((12 - 6.2)^2\).
The ball is higher when it is slower: consistent with energy trading from kinetic to potential. Note the method does not care whether the ball is rising or falling, or what path it took.
Example 8.11: A roller-coaster hill
A \(1500\,\mathrm{kg}\) roller-coaster car is moving at \(36\,\mathrm{m/s}\) at the bottom of a hill and slows to \(3.0\,\mathrm{m/s}\) at the top. Neglecting friction, how high is the hill?
Solution
Take the bottom of the hill as \(U = 0\), so the car starts with only kinetic energy and ends with both kinetic and potential energy. Conservation of mechanical energy:
\[\tfrac{1}{2}mv_i^2 = \tfrac{1}{2}mv_f^2 + mgh.\]
Subtract \(\tfrac{1}{2}mv_f^2\) from both sides and divide both sides by \(mg\); the mass cancels:
\[mgh = \tfrac{1}{2}m\left(v_i^2 - v_f^2\right) \;\Longrightarrow\; h = \frac{v_i^2 - v_f^2}{2g},\]
so
\[h = \frac{(36)^2 - (3.0)^2}{2(9.8)}\,\mathrm{m} = \frac{1296 - 9}{19.6}\,\mathrm{m} = \frac{1287}{19.6}\,\mathrm{m} \approx \boxed{66\,\mathrm{m}}.\]
The car’s mass cancels: the hill height depends only on the two speeds. Notice how little the final speed matters: \((3.0)^2 = 9\) is under 1% of \((36)^2 = 1296\), so a car that barely crawls over the top has used almost all of its kinetic energy.
Example 8.12: The speed of a swing
A child swings on a \(3.0\,\mathrm{m}\) rope. If the rope makes a maximum angle of \(72^\circ\) with the vertical, how fast is the child moving at the lowest point?
Solution
Step 1: Which forces do work? Two forces act on the child: gravity and the tension in the rope. The tension is always directed along the rope, toward the pivot, while the motion is always along the arc: perpendicular to it. A force perpendicular to the motion does no work, so the tension never appears in the energy bookkeeping, no matter how large it gets. Only gravity does work, and mechanical energy is conserved.
Step 2: Find the height drop. At the highest point the child is momentarily at rest; at the lowest point all that potential energy has become kinetic. We need the vertical distance between those two points. When the rope hangs at angle \(\theta\) from the vertical, the child is a vertical distance \(L\cos\theta\) below the pivot (the side of the right triangle adjacent to \(\theta\)). At the bottom the child is the full length \(L\) below the pivot. The difference is the height drop:
\[h = L - L\cos\theta = L(1 - \cos\theta) = (3.0\,\mathrm{m})(1 - \cos 72^\circ) = (3.0\,\mathrm{m})(1 - 0.309) = 2.07\,\mathrm{m}.\]
Step 3: Energy conservation. Potential energy at the top becomes kinetic energy at the bottom. Divide both sides by \(m\), multiply by \(2\), and take the square root:
\[mgh = \tfrac{1}{2}mv^2 \;\Longrightarrow\; v^2 = 2gh \;\Longrightarrow\; v = \sqrt{2gh} = \sqrt{2(9.8)(2.07)}\,\mathrm{m/s} \approx \boxed{6.4\,\mathrm{m/s}}.\]
Check. The limits of \(h = L(1 - \cos\theta)\) make sense: at \(\theta = 0\), \(\cos 0 = 1\) and \(h = 0\) (no swing, no drop); at \(\theta = 90^\circ\), \(\cos 90^\circ = 0\) and \(h = L\) (the rope horizontal, the child a full rope-length above the bottom). Our \(72^\circ\) gives \(h = 0.69L\), between the two.
Checkpoint 8.5
Two identical marbles are released from rest at the same height on two frictionless tracks: one a straight ramp, the other a wiggly track of about the same length that dips well below the finish line before rising back to it. Which marble is moving faster at the finish? Which arrives first? Explain why these are different questions.
When nonconservative forces act
When a nonconservative force acts, mechanical energy is no longer constant; equation (8.11) accounts for the difference. The nonconservative force we meet most often is kinetic friction. A constant friction force \(F_{f,k}\) opposes the motion at every point of the trip, so its work is negative and grows in proportion to the distance actually traveled:
Key Equation: Work done by kinetic friction
\[W_{\rm nc} = -F_{f,k} d, \qquad F_{f,k} = \mu_k F_N. \tag{8.12}\]
The \(d\) in equation (8.12) is the path length (the total distance the two surfaces slide across each other) and not the displacement. This is precisely where the two kinds of force part ways, so it is worth dwelling on. Push a block one meter out and one meter back to where it started: the displacement is zero, so gravity and a spring do zero net work. But the surfaces rubbed for two meters, so friction has done \(-2F_{f,k}\) joules of work. Whenever an object doubles back, stop and ask which length each term in your equation needs.
Note also that \(F_N\) is the normal force at the surface in question, which is not always \(mg\). As in Chapters 6 and 7, it comes from the free-body diagram: on an incline at angle \(\theta\) it is \(mg\cos\theta\); on a horizontal floor it is \(mg\); and if something presses the object against the surface, it is larger still.
Example 8.13: A crate down a rough ramp
A \(3.00\,\mathrm{kg}\) crate starts from rest and slides down a ramp \(1.00\,\mathrm{m}\) long, inclined at \(30.0^\circ\), against a constant friction force of \(5.00\,\mathrm{N}\). (a) Find its speed at the bottom. (b) It then slides onto a horizontal floor where the friction force is also \(5.00\,\mathrm{N}\); how far does it travel before stopping? (The normal force is larger on the floor than on the ramp, so a slightly smoother floor gives the same friction force: here we are simply told the force, and need not work back to \(\mu_k\).)
Solution
(a) Speed at the bottom. Take the bottom of the ramp as \(U = 0\). The crate slides \(L = 1.00\,\mathrm{m}\) along a slope of \(30.0^\circ\); the vertical drop is the side of that right triangle opposite the angle, so
\[h = L\sin 30.0^\circ = (1.00\,\mathrm{m})(0.500) = 0.500\,\mathrm{m}.\]
Friction is a nonconservative force. It points up the ramp while the crate moves down, so \(\theta = 180^\circ\) and its work over the ramp is negative:
\[W_{\rm nc} = F_f L\cos 180^\circ = -(5.00\,\mathrm{N})(1.00\,\mathrm{m}) = -5.00\,\mathrm{J}.\]
The energy bookkeeping from top (at rest, so \(K_i = 0\)) to bottom (so \(U_f = 0\)) is \(K_i + U_i + W_{\rm nc} = K_f + U_f\), which here reduces to
\[\underbrace{mgh}_{U_i} + \underbrace{W_{\rm nc}}_{\text{friction}} = \underbrace{\tfrac{1}{2}mv^2}_{K_f}.\]
With \(mgh = (3.00\,\mathrm{kg})(9.8\,\mathrm{m/s^2})(0.500\,\mathrm{m}) = 14.7\,\mathrm{J}\), and remembering that \(W_{\rm nc}\) is negative,
\[\tfrac{1}{2}(3.00\,\mathrm{kg})v^2 = 14.7\,\mathrm{J} + (-5.00\,\mathrm{J}) = 9.7\,\mathrm{J}.\]
Multiply both sides by \(2\), divide by \(3.00\), and take the square root:
\[v = \sqrt{\frac{2(9.7\,\mathrm{J})}{3.00\,\mathrm{kg}}} = \sqrt{6.47\,\mathrm{m^2/s^2}} \approx \boxed{2.54\,\mathrm{m/s}}.\]
(b) Sliding distance on the floor. On the level floor there is no change in height, so no potential energy is involved. The crate’s kinetic energy (\(9.7\,\mathrm{J}\)) is removed entirely by friction over a distance \(d\); setting the energy lost equal to the work friction does, and dividing both sides by \(F_f\),
\[\tfrac{1}{2}mv^2 = F_f d \;\Longrightarrow\; d = \frac{\tfrac{1}{2}mv^2}{F_f} = \frac{9.7\,\mathrm{J}}{5.00\,\mathrm{N}} \approx \boxed{1.94\,\mathrm{m}}.\]
(A joule is a newton-meter, so \(\,\mathrm{J}/\,\mathrm{N} = \,\mathrm{m}\).)
Check. Treat the whole trip at once. The crate starts and ends at rest, so all \(14.7\,\mathrm{J}\) of its potential energy must go to friction, which acts over the total path \(L + d\): \(mgh = F_f(L + d)\), so \(L + d = 14.7/5.00 = 2.94\,\mathrm{m}\) and \(d = 2.94 - 1.00 = 1.94\,\mathrm{m}\). ✓ The speed at the bottom was never needed for part (b).
It helps to see the whole trip as one energy budget. The crate begins with \(14.7\,\mathrm{J}\) of gravitational potential energy and nothing else; it ends with all \(14.7\,\mathrm{J}\) turned into thermal energy in the surfaces. Mechanical energy is not conserved here, but the total is, at every stage:
Read the bars left to right: the potential column empties, part of it filling the kinetic column while the rest leaks away as heat; then friction on the floor drains the kinetic column too. The dashed line (the total) never moves.
Example 8.14: A block compressing a spring
A \(0.80\,\mathrm{kg}\) block slides at \(1.2\,\mathrm{m/s}\) toward a spring of force constant \(50\,\mathrm{N/m}\). (a) If the surface is frictionless, what is the maximum compression of the spring? (b) If instead there is kinetic friction with \(\mu_k = 0.50\), what is the maximum compression?
Solution
At maximum compression the block is momentarily at rest, so all of its kinetic energy has gone into the spring (and, in part (b), into friction).
(a) Frictionless: \(\tfrac{1}{2}mv^2 = \tfrac{1}{2}kx^2\). The factors of \(\tfrac{1}{2}\) cancel; divide both sides by \(k\) and take the square root:
\[x^2 = \frac{mv^2}{k} \;\Longrightarrow\; x = \sqrt{\frac{mv^2}{k}} = v\sqrt{\frac{m}{k}} = (1.2\,\mathrm{m/s})\sqrt{\frac{0.80\,\mathrm{kg}}{50\,\mathrm{N/m}}} \approx \boxed{0.15\,\mathrm{m}}.\]
(Since \(v\) is positive, \(\sqrt{v^2} = v\) comes out of the root.) The units under the root are \(\,\mathrm{kg}/(\,\mathrm{N/m}) = \,\mathrm{kg\cdot m}/(\,\mathrm{kg\cdot m/s^2}) = \,\mathrm{s^2}\), so \(x\) comes out in \((\,\mathrm{m/s})(\,\mathrm{s}) = \,\mathrm{m}\).
(b) Now friction also removes energy, doing work \(-F_{f,k} x = -\mu_k mg\,x\) over the compression distance \(x\) (on the level floor, \(F_N = mg\)). The block’s initial kinetic energy is shared between the spring and friction:
\[\tfrac{1}{2}mv^2 = \tfrac{1}{2}kx^2 + \mu_k mg\,x.\]
Compute each coefficient: \(\tfrac{1}{2}mv^2 = \tfrac{1}{2}(0.80)(1.2)^2 = 0.576\,\mathrm{J}\), \(\tfrac{1}{2}k = 25\,\mathrm{N/m}\), and \(\mu_k mg = (0.50)(0.80)(9.8) = 3.92\,\mathrm{N}\). So
\[0.576 = 25x^2 + 3.92x.\]
The unknown \(x\) appears both squared and to the first power, so this is a quadratic. Subtract \(0.576\) from both sides to put it in standard form, and read off \(a = 25\), \(b = 3.92\), \(c = -0.576\):
\[25x^2 + 3.92x - 0.576 = 0.\]
In the quadratic formula, \(-4ac = -4(25)(-0.576) = +57.6\) is positive because \(c\) is negative:
\[x = \frac{-3.92 \pm \sqrt{(3.92)^2 + 57.6}}{2(25)} = \frac{-3.92 \pm \sqrt{15.4 + 57.6}}{50} = \frac{-3.92 \pm 8.54}{50}.\]
The “minus” root is negative, a stretch rather than a compression, and does not describe this situation. The “plus” root gives
\[x = \frac{4.62}{50} \approx \boxed{0.092\,\mathrm{m}}.\]
The compression is smaller than in part (a): friction removes some energy that would otherwise have gone into the spring.
Check. At \(x = 0.092\,\mathrm{m}\) the spring holds \(\tfrac{1}{2}(50)(0.092)^2 = 0.212\,\mathrm{J}\) and friction has taken \((3.92)(0.092) = 0.361\,\mathrm{J}\). Together, \(0.212 + 0.361 = 0.573\,\mathrm{J}\), which matches the initial \(0.576\,\mathrm{J}\) to rounding. Friction took the larger share.
Reading a potential-energy curve
When mechanical energy is conserved, a single graph tells the whole story of a particle’s motion along a line. A plot of \(U(x)\), with the particle’s total energy \(E\) drawn as a horizontal line across it, is called an energy diagram, and it is a remarkably efficient picture. Because \(E = K + U\) and \(E\) is a constant, the vertical distance between the line and the curve is the kinetic energy:
\[K(x) = E - U(x).\]
And by equation (8.8), the slope of the curve gives the force: the force always points downhill on the \(U\) curve.
Three features of such a diagram do most of the work.
Turning points. Where the \(E\) line meets the curve, \(K = 0\) and the particle is momentarily at rest. It cannot go further: beyond that point \(U\) would exceed \(E\), which would require negative kinetic energy, and there is no such thing. Instead the force turns it around. A particle whose energy line cuts the curve on both sides of a valley is bound: it oscillates back and forth between the turning points forever, fastest at the bottom, where \(U\) is least and the gap is widest.
Equilibrium. Wherever the curve is flat, \(\frac{\mathrm{d}U}{\mathrm{d}x} = 0\), so the force vanishes and a particle placed there at rest stays there. These are the equilibrium positions.
Stability. Not all equilibria are alike, and the shape of the curve tells you which is which. At a minimum of \(U\) (the bottom of a valley) nudging the particle either way puts it on a slope whose downhill direction points back where it came from. The force restores it, and the equilibrium is stable. At a maximum of \(U\) (the top of a hill) the downhill direction points further away, so any nudge is amplified and the particle runs off. That equilibrium is unstable. In calculus terms, \(\frac{\mathrm{d}^{2}U}{\mathrm{d}x^{2}} > 0\) means stable and \(\frac{\mathrm{d}^{2}U}{\mathrm{d}x^{2}} < 0\) means unstable. The mental image is a marble in a bowl versus a marble balanced on an upturned bowl. A spring’s \(U_s = \tfrac12 kx^2\) is a parabola with its minimum at \(x = 0\), so the relaxed position of a spring is a stable equilibrium, which is why a mass on a spring oscillates about it rather than flying away.
Example 8.15: Describing motion from an energy diagram
A particle is released from rest at the left turning point in Figure 8.2. Describe its subsequent motion without doing any calculation. What would change if its total energy were raised above the peak?
Solution
Released from rest, the particle has \(K = 0\) and sits on the curve. The slope there is negative (the curve falls to the right), so by equation (8.8) the force is positive, to the right, and the particle accelerates into the valley, picking up exactly as much kinetic energy as it loses potential.
It is moving fastest at the bottom of the valley, where the gap \(E - U\) is widest. Past the bottom the curve rises again, the force reverses, and the particle slows, coming momentarily to rest at the right turning point. There the force pushes it back to the left, and the whole cycle repeats. The particle is trapped, oscillating between the two turning points indefinitely. It cannot reach the peak: doing so would demand more potential energy than it possesses in total.
Raise \(E\) above the peak and the picture changes completely. The energy line no longer intersects the curve on the right, so there is no right-hand turning point: the particle climbs over the hill, still slowing near the top, then speeds away down the far side and never returns. It has become unbound. The minimum energy needed for this escape is set by the height of the peak, not by the shape of the valley.
Checkpoint 8.6
On an energy diagram, a particle sits exactly at a maximum of \(U(x)\), at rest. Strictly speaking it is in equilibrium: the net force on it is zero. Why, then, would you never expect to find a real particle there? And where on the same diagram would you expect to find one?
Answers to Checkpoints
Checkpoint 8.5. Both marbles arrive at the finish with the same speed: with no friction, each converts the same drop in potential energy, \(mgh\), into kinetic energy, and the shape of the path does not matter. The marble on the dipping track arrives first. Its extra drop into the dip makes it go faster than the other marble for most of the trip, which more than makes up for the dip’s slightly longer path. The questions are different because energy conservation relates speeds at two positions, while arrival time depends on the speed all along the way: something the energy equation says nothing about.
Checkpoint 8.6. A maximum of \(U(x)\) is an unstable equilibrium: the slope is zero there, but on either side the force points away from the peak. The slightest disturbance (a vibration, a molecule’s bump) pushes the particle off, and it then accelerates downhill away from the peak. Real particles are found near minima of \(U(x)\), the stable equilibria, where any small displacement produces a force pushing the particle back. There they sit at rest or oscillate about the bottom of the valley.
This page titled 8.5: Conservation of Mechanical Energy was last modified on Thu, 12 Nov 2026 04:26:53 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Michael Ragsdale.
The book could not be loaded just now.