Opening the book…
A current produces a magnetic field, and a magnetic field exerts a force on a current. So two currents exert forces on each other. Ampère discovered this within weeks of hearing of Oersted’s experiment.
Let two long parallel wires a distance \(d\) apart carry currents \(I_1\) and \(I_2\) in the same direction (Figure 23.4a). Wire 1 produces a field \(B_1 = \mu_0 I_1/2\pi d\) at the position of wire 2, perpendicular to wire 2. By equation (22.8), a length \(L\) of wire 2 feels a force \(F = I_2LB_1\), and the right-hand rules show that it points toward wire 1. The force per unit length is
Key Equation: Force between parallel currents
\[\frac{F}{L} = \frac{\mu_0 I_1 I_2}{2\pi d}. \tag{23.5}\]
By Newton’s third law, wire 1 feels an equal and opposite force. The rule is the reverse of the rule for charges: parallel currents attract, and antiparallel currents repel (Figure 23.4b).
Defining the ampere. From 1948 to 2019, this force defined the unit of current. One ampere was the current that, flowing in each of two long parallel wires one meter apart in vacuum, produces a force of exactly \(2\times10^{-7}\) newton per meter of length. That is why \(\mu_0\) was exactly \(4\pi\times10^{-7}\,\mathrm{T\cdot m/A}\): the definition built it in. Since 2019 the ampere has instead been defined by fixing the value of the elementary charge \(e\), so that an ampere is a definite number of elementary charges per second, and \(\mu_0\) became a measured constant. The measured value is the same to nine decimal places.
Example 23.3: A short circuit in a substation
Two parallel copper busbars in an electrical substation are \(10\,\mathrm{cm}\) apart and carry currents in opposite directions. Find the force per meter between them (a) at the normal current of \(2000\,\mathrm{A}\), and (b) during a short circuit, when the current briefly rises to \(40\,\mathrm{kA}\).
Solution
(a) The force per unit length is
\[\frac{F}{L} = \frac{\mu_0 I^2}{2\pi d} = \frac{(4\pi\times10^{-7})(2000)^2}{2\pi(0.10)} = \boxed{8.0\,\mathrm{N/m}},\]
pushing the bars apart.
(b) The force grows as \(I^2\), so a current twenty times larger gives four hundred times the force: \(\boxed{3.2\times 10^{3}\,\mathrm{N/m}}\). That is the weight of more than \(300\,\mathrm{kg}\) on every meter of bar. Busbars and their supports are designed to survive these brief but violent magnetic forces, and a short circuit is often heard as a loud bang as the conductors jerk apart.
This page titled 23.2: Force Between Two Parallel Currents was last modified on Thu, 12 Nov 2026 04:26:50 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Michael Ragsdale.
The book could not be loaded just now.