Opening the book…
Anything that oscillates smoothly, such as the charge on a capacitor in an LC circuit, the voltage at a wall outlet, or the displacement of a string carrying a wave, is described by a sine or a cosine:
\[y = A\sin(\omega t + \phi).\]
Three numbers pin it down. The amplitude \(A\) is the largest value \(y\) reaches. The angular frequency \(\omega\), in radians per second, says how quickly the cycle repeats; it is related to the frequency \(f\) and the period \(T\) by \(\omega = 2\pi f = 2\pi/T\). The phase constant \(\phi\) says where in its cycle the oscillation is at \(t = 0\). The whole argument \(\omega t + \phi\) is called the phase.
A rotating vector
Picture a vector of length \(A\) with its tail at the origin, turning counterclockwise at a steady angular speed \(\omega\), so that at time \(t\) it makes the angle \(\omega t + \phi\) with the \(+x\) axis (Figure C.5). By Section C.6, its \(y\)-component is
\[A\sin(\omega t + \phi),\]
which is exactly our sinusoid. As the vector turns, its \(y\)-component rises to \(A\) when the vector points straight up, falls through zero when it points to the left, reaches \(-A\) when it points straight down, and returns to zero as the vector completes the turn. One revolution is one cycle. A vector used this way is called a phasor.
Note: The phasor is not the quantity
A phasor is a bookkeeping device, not a physical arrow in space. Only its vertical component is the actual voltage, current, or displacement at that instant. The advantage of the picture is that it turns statements about timing, which are hard to see in formulas, into statements about angles, which are easy to see in a drawing.
Phase differences
Two sinusoids with the same angular frequency,
\[y_1 = A_1\sin\omega t, \qquad y_2 = A_2\sin(\omega t + \phi),\]
are drawn as two phasors that turn together, always separated by the same angle \(\phi\) (Figure C.6). The whole diagram rotates rigidly, so the angle between the phasors never changes. That fixed angle is the phase difference. The phasor that is ahead in the counterclockwise direction reaches the top of the circle first, so its sinusoid reaches its peak first; we say it leads, and the other lags. In time, a phase difference \(\phi\) (in radians) is a delay of
\[\Delta t = \frac{\phi}{\omega} = \frac{\phi}{2\pi}\,T,\]
so a phase difference of \(90^\circ\) (\(\pi/2\)) is a quarter period. Since \(\cos\omega t = \sin(\omega t + 90^\circ)\), a cosine is just a sine that leads by a quarter cycle.
Adding sinusoids
The real power of phasors appears when sinusoids must be added, as happens with the voltages around an ac circuit or with two waves arriving at the same point. The sum \(y_1 + y_2\) is the sum of the \(y\)-components of the two phasors. But the \(y\)-component of a vector sum is the sum of the \(y\)-components, so \(y_1 + y_2\) is the \(y\)-component of the vector sum of the two phasors. That vector sum is itself a phasor: it has a fixed length and turns rigidly with the other two. So the sum of two sinusoids of the same frequency is another sinusoid of that frequency, and its amplitude and phase come from ordinary vector addition, done at any convenient instant, usually \(t = 0\).
Put \(A_1\) along the \(x\)-axis and \(A_2\) at the angle \(\phi\). The components of the sum are \(A_1 + A_2\cos\phi\) and \(A_2\sin\phi\), and Section C.7 gives its length and angle:
Key Equation: Adding two sinusoids of the same frequency
\[A = \sqrt{A_1^2 + A_2^2 + 2A_1A_2\cos\phi}, \qquad \tan\theta = \frac{A_2\sin\phi}{A_1 + A_2\cos\phi}, \tag{C.5}\]
so that \(y_1 + y_2 = A\sin(\omega t + \theta)\). The amplitudes add directly only when \(\phi = 0\); in general the peaks of \(y_1\) and \(y_2\) happen at different times, and the sum’s peak is smaller than \(A_1 + A_2\). Three special cases are worth remembering:
- \(\phi = 0\) (in phase): \(A = A_1 + A_2\).
- \(\phi = 180^\circ\) (opposite phase): \(A = |A_1 - A_2|\), which is zero if the amplitudes are equal.
- \(A_1 = A_2\): \(A = 2A_1\cos(\phi/2)\), the result used for waves in Chapter 29 and for light in Chapter 33.
Phasors are used this way for ac circuits in Chapter 26, for adding waves in Chapter 29, and for interference and diffraction in Chapters 33 and 34.
Example C.10: Adding two ac voltages
Two circuit elements in series have voltages \(v_1 = (3.0\,\mathrm{V})\sin\omega t\) and \(v_2 = (4.0\,\mathrm{V})\sin(\omega t + 90^\circ)\). Find the total voltage \(v_1 + v_2\).
Solution
The phasors are perpendicular. Drawn head to tail, they form a right triangle (below), so the amplitude is the hypotenuse,
\[V = \sqrt{(3.0)^2 + (4.0)^2}\,\,\mathrm{V} = 5.0\,\mathrm{V},\]
and the angle is \(\theta = \tan^{-1}(4.0/3.0) = 53.1^\circ\). Equation (C.5) with \(\phi = 90^\circ\) gives the same thing, since \(\cos 90^\circ = 0\). So
\[v_1 + v_2 = (5.0\,\mathrm{V})\sin(\omega t + 53.1^\circ).\]
Check: at \(t = 0\), \(v_1 = 0\) and \(v_2 = 4.0\,\mathrm{V}\), and the answer gives \((5.0)\sin 53.1^\circ = 4.0\,\mathrm{V}\). ✓ Notice that the total amplitude is \(5.0\,\mathrm{V}\), not \(7.0\,\mathrm{V}\): the two voltages never reach their peaks at the same moment.
Checkpoint C.5
Two voltages of the same frequency have amplitudes \(6.0\,\mathrm{V}\) and \(8.0\,\mathrm{V}\). (a) What are the largest and smallest possible amplitudes of their sum, and what phase differences give them? (b) What phase difference makes the sum’s amplitude \(10.0\,\mathrm{V}\)?
Answers to Checkpoints
Checkpoint C.5. (a) The largest is \(6.0 + 8.0 = 14.0\,\mathrm{V}\), when they are in phase (\(\phi = 0\)). The smallest is \(8.0 - 6.0 = 2.0\,\mathrm{V}\), when they are opposite (\(\phi = 180^\circ\)). (b) \(10.0^2 = 6.0^2 + 8.0^2 + 2(6.0)(8.0)\cos\phi\) gives \(100 = 100 + 96\cos\phi\), so \(\cos\phi = 0\) and \(\phi = 90^\circ\). The phasors form a 6–8–10 right triangle.
This page titled C.8: Sinusoids and Phasors was last modified on Thu, 12 Nov 2026 04:27:18 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Michael Ragsdale.
The book could not be loaded just now.