28.9: Forced Oscillations

Physics: A Foundation for Scientists and Engineers · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    28.9: Forced Oscillations

    Left alone, every oscillator vibrates at its own natural frequency, set by its physical makeup. For a mass–spring system,

    \[\omega_0 = \sqrt{\frac{k}{m}}. \tag{28.20}\]

    But we can also drive an oscillator with an external periodic force, pushing it at some driving frequency \(\omega_d\) of our choosing. The classic picture is a hand moving the top of a spring up and down: the hand moves at \(\omega_d\), and after a brief transient the block settles into steady oscillation at that same driving frequency, but with an amplitude that depends dramatically on how \(\omega_d\) compares with the natural \(\omega_0\).

    Resonance curve: steady-state amplitude against the ratio of driving to natural frequency.
    Figure 28.4. Resonance. The steady-state amplitude of a driven oscillator peaks sharply when the driving frequency equals the natural frequency, \(\omega_d = \omega_0\). The lighter the damping, the taller and narrower the peak.
    Figure descriptionA graph of steady-state amplitude against the ratio of driving frequency to natural frequency, omega sub d over omega sub zero. Two curves are shown. The light-damping curve rises to a tall, narrow peak at a ratio of one and falls away steeply on either side. The heavy-damping curve peaks at the same place but is much lower and far broader. Both approach zero at high frequency ratios.

    When the driving frequency is far from \(\omega_0\), the block responds weakly. As \(\omega_d\) approaches \(\omega_0\), the response grows. And when \(\omega_d = \omega_0\) (when we push exactly in step with the system’s own rhythm, adding energy on every cycle at just the right moment) the amplitude grows enormously. This dramatic build-up is resonance. The only thing that limits the amplitude at resonance is damping; with little damping, the response at resonance can become large enough to destroy the system (Figure 28.4).

    Resonance is everywhere. It is how a radio tunes to one station and rejects the rest, how a quartz crystal keeps a watch on time, how a pushed swing climbs higher with each well-timed push, and how an opera singer can shatter a glass by sounding its natural note.

    Resonance also has a long record of causing engineering trouble. In 1831 a column of soldiers marching in step across the Broughton Suspension Bridge near Manchester felt it begin to vibrate in time with their footsteps; the extra loading snapped a bolt in one of its chains and the bridge collapsed beneath them. Ever since, the British Army has ordered troops to break step when crossing a bridge. In June 2000, London’s new Millennium Bridge began swaying from side to side on its opening weekend. Its sideways natural frequency, about \(1\,\mathrm{Hz}\), was close to the rate at which a walker’s weight shifts from foot to foot; once the deck started to move, pedestrians unconsciously fell into step with the sway, pushing it harder still. The bridge closed after two days and reopened in 2002 fitted with dampers. And in the Mexico City earthquake of the chapter opener, the lake-bed clay drove the city’s mid-rise buildings at their own natural period. The engineering responses share one idea: keep a structure’s natural frequencies away from the frequencies likely to drive it, and build in enough damping that no resonance can grow without bound, the same reason a skyscraper carries the tuned mass damper of our earlier example.

    Checkpoint 28.5

    Two identical oscillators, one lightly damped and one heavily damped, are driven by the same periodic force. (a) Driven at the natural frequency, which one reaches the larger amplitude? (b) Driven at a frequency far below the natural frequency, does the damping matter much? Explain using Figure 28.4.

    Answer

    Answers to Checkpoints

    Checkpoint 28.5. (a) The lightly damped one, by far. At resonance each push arrives in step with the motion and adds energy, and the steady-state amplitude grows until the energy lost to damping per cycle balances the energy supplied; with little damping that balance comes only at a large amplitude, giving the tall, narrow peak of Figure 28.4. (b) Hardly at all. Far below resonance the oscillator simply follows the slowly varying force, its motion set mainly by the spring’s stiffness, and the two curves in the figure nearly coincide. Damping matters most near resonance.


    This page titled 28.9: Forced Oscillations was last modified on Thu, 12 Nov 2026 04:27:04 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Michael Ragsdale.