16.5: A Dipole in an Electric Field

Physics: A Foundation for Scientists and Engineers · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    16.5: A Dipole in an Electric Field
    An electric dipole in a uniform field E that points to the right.
    Figure 16.14. A dipole in a uniform field. The forces on the two charges are equal and opposite, so the net force is zero, but they form a couple whose torque \(\tau = pE\sin\theta\) turns \(\vec{p}\) toward the direction of \(\vec{E}\).
    Figure descriptionAn electric dipole in a uniform field E that points to the right. The dipole's axis is tilted at angle theta above the field direction, with the positive charge at the upper right and the negative charge at the lower left, and the dipole moment p points from the negative toward the positive charge. The force on the positive charge, q E, points to the right; the force on the negative charge, minus q E, points to the left. The two forces form a couple that rotates the dipole clockwise, toward alignment with the field.

    Finally, place an electric dipole, with charges \(\pm q\) a distance \(d\) apart, in a uniform external field \(\vec{E}\), with its dipole moment \(\vec{p}\) at an angle \(\theta\) to the field (Figure 16.14). The positive charge feels a force \(q\vec{E}\) along the field and the negative charge feels \(-q\vec{E}\), equal and opposite. The net force on the dipole is zero, so its center of mass does not accelerate. The two forces do not act along the same line, however, so they exert a torque. About the center of the dipole, each force has a moment arm \((d/2)\sin\theta\), and both turn the dipole the same way, toward alignment with the field. The magnitude of the net torque is

    \[\tau = 2\left(qE\right)\left(\frac{d}{2}\sin\theta\right) = qdE\sin\theta = pE\sin\theta.\]

    In the vector language of Chapter 10 this is a cross product:

    Key Equation: Torque on an electric dipole

    \[\vec{\tau} = \vec{p}\times\vec{E}. \tag{16.17}\]

    The torque is zero when \(\vec{p}\) is parallel to \(\vec{E}\) (\(\theta = 0\)) or antiparallel to it (\(\theta = 180^\circ\)), and largest, \(pE\), when the dipole is perpendicular to the field. It always tends to rotate \(\vec{p}\) toward the direction of \(\vec{E}\).

    Potential energy. As the field turns the dipole, it does work on it, so a dipole in a field has potential energy that depends on its orientation. From Chapter 11, a torque does work \(dW = \tau\,d\theta\) as the dipole rotates, and the change in potential energy is the negative of the work done by the field. Since the field’s torque acts to decrease \(\theta\), it is \(-pE\sin\theta\) in the direction of increasing \(\theta\), and

    \[\Delta U = -W = -\int_{\theta_1}^{\theta_2}(-pE\sin\theta)\,d\theta = -pE\cos\theta_2 + pE\cos\theta_1.\]

    Only changes in \(U\) matter, so we are free to choose where \(U = 0\). The convenient choice is \(U = 0\) at \(\theta = 90^\circ\), which gives

    Key Equation: Potential energy of an electric dipole

    \[U = -pE\cos\theta = -\vec{p}\cdot\vec{E}. \tag{16.18}\]

    The potential energy is lowest, \(-pE\), when the dipole is aligned with the field. This is a stable equilibrium: tilt the dipole slightly and the torque pulls it back, so it oscillates about \(\theta = 0\) like a pendulum (Problem 16.29). The energy is highest, \(+pE\), when the dipole points against the field. That is also an equilibrium, since the torque is zero there, but it is unstable: the slightest tilt, and the dipole swings all the way around. Turning a dipole from the stable to the unstable orientation takes work \(2pE\).

    Example 16.13: A water molecule in a strong field

    A water molecule, \(p = 6.2\times 10^{-30}\,\mathrm{C\cdot m}\), sits in a field of \(2.0\times 10^{5}\,\mathrm{N/C}\). (a) What is the largest torque the field can exert on it? (b) How much work does it take to turn the molecule from alignment with the field to the opposite orientation? (c) Compare your answer to (b) with the typical thermal energy of a molecule at room temperature, \(k_BT \approx 4.1\times 10^{-21}\,\mathrm{J}\) (Chapter 36).

    Solution

    (a) The torque is greatest at \(\theta = 90^\circ\):

    \[\tau_{\max} = pE = (6.2\times10^{-30})(2.0\times10^{5}) = \boxed{1.2\times 10^{-24}\,\mathrm{N\cdot m}}.\]

    (b) From equation (16.18), the work is the difference in potential energy between \(\theta = 180^\circ\) and \(\theta = 0\):

    \[W = U(180^\circ) - U(0) = pE - (-pE) = 2pE = \boxed{2.5\times 10^{-24}\,\mathrm{J}}.\]

    (c) This is more than a thousand times smaller than \(k_BT\). The random jostling of molecules at room temperature easily overwhelms the aligning torque, so even in a field this strong, the water molecules are only very slightly more likely to point along the field than against it. It takes fields of order \(10^{9}\,\mathrm{N/C}\), like those very close to an ion, to line water molecules up completely.

    Note: Microwave ovens

    A microwave oven fills its interior with an electric field that reverses direction about five billion times a second (twice per cycle at \(2.45\,\mathrm{GHz}\)). The torque of equation (16.17) tries to turn each water molecule in the food first one way and then the other. As the molecules twist, they jostle their neighbors, and the energy the field puts in ends up as random thermal motion. The food gets hot. Materials without polar molecules, such as glass, most plastics, and dry paper, are warmed very little.

    Dipoles in a nonuniform field. In a uniform field the forces on a dipole’s two charges cancel. In a nonuniform field they do not, because one end sits in a stronger field than the other, and a net force remains. A dipole aligned with a nonuniform field is pulled toward the region where the field is stronger. This explains a puzzle from Chapter 15. The field of a charged comb is strongest near the comb. A scrap of paper held nearby is polarized, turning into a set of small dipoles aligned with the field (Figure 15.4), and those dipoles are drawn toward the strong-field region, which is to say toward the comb, whatever the sign of its charge.

    Checkpoint 16.7

    An electric dipole is placed in a uniform field with \(\vec{p}\) perpendicular to \(\vec{E}\) and released. (a) What is the net force on it? (b) Describe its subsequent motion if there is no friction. (c) Through what angle does it turn before its kinetic energy is greatest?

    Answer

    Answers to Checkpoints

    Checkpoint 16.7. (a) Zero. In a uniform field the forces \(+q\vec{E}\) and \(-q\vec{E}\) on the two ends are equal and opposite. (b) There is a torque, which rotates \(\vec{p}\) toward \(\vec{E}\). The dipole swings through the aligned orientation, overshoots to \(90^\circ\) on the other side, stops, and swings back, oscillating like a pendulum about alignment with \(\vec{E}\). (c) \(90^\circ\). Its potential energy, \(-pE\cos\theta\), is lowest when \(\vec{p}\) is aligned with \(\vec{E}\), so its kinetic energy is greatest there, after it has turned through \(90^\circ\).


    This page titled 16.5: A Dipole in an Electric Field was last modified on Thu, 12 Nov 2026 04:26:57 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Michael Ragsdale.