29.E: Waves I (Problems)

Physics: A Foundation for Scientists and Engineers · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    29.E: Waves I (Problems)

    Difficulty key: ★ introductory, ★★ standard, ★★★ challenging. Take \(g = 9.8\,\mathrm{m/s^2}\) unless told otherwise.

    Section 29.1 — Wave Motion

    29.1 ★ [Conceptual.] Classify each wave as transverse or longitudinal, and as pulse or periodic: (a) a single flick sent down a stretched rope; (b) a sound wave from a steadily ringing bell; (c) the ripples spreading steadily from a dripping faucet; (d) the side-to-side wave on a long, continuously shaken spring.

    29.2 ★ [Conceptual.] A cork floats on water as a steady train of waves passes. Describe the cork’s motion, and explain what the wave transports past the cork and what it does not.

    Section 29.2 — The Wave Equation

    29.3 ★ A wave has wavelength \(0.50\,\mathrm{m}\) and frequency \(120\,\mathrm{Hz}\).

    1. Find the wave number \(k\).
    2. Find the angular frequency \(\omega\).
    3. Find the wave speed.

    29.4 ★★ A transverse wave on a string is described by

    \[y(x,t) = (0.020\,\mathrm{m})\sin\!\big[(6.0\,\mathrm{rad/m})x - (300\,\mathrm{rad/s})t\big].\]

    1. State the amplitude, wave number, and angular frequency.
    2. Find the wavelength, frequency, period, and speed.
    3. In which direction does the wave travel?

    29.5 ★★ A sinusoidal wave traveling in the \(+x\) direction has amplitude \(8.0\,\mathrm{cm}\), wavelength \(80.0\,\mathrm{cm}\), and frequency \(3.0\,\mathrm{Hz}\). At \(t = 0\) and \(x = 0\) the displacement is zero and increasing. Write the full wave function, including the phase constant.

    Section 29.3 — Speed of a Wave

    29.6 ★ A string of linear density \(4.0\times 10^{-3}\,\mathrm{kg/m}\) is under a tension of \(36\,\mathrm{N}\). Find the speed of transverse waves on it.

    29.7 ★★ A \(2.0\,\mathrm{m}\) rope of mass \(0.12\,\mathrm{kg}\) is stretched with a tension of \(60\,\mathrm{N}\).

    1. Find the wave speed.
    2. If the rope is shaken at \(8.0\,\mathrm{Hz}\), what is the wavelength of the resulting wave?

    29.8 ★★ [Real-world application: engineering.] A steel guy-wire of linear density \(0.025\,\mathrm{kg/m}\) carries a transverse pulse that travels its \(12\,\mathrm{m}\) length in \(0.18\,\mathrm{s}\). Find (a) the wave speed and (b) the tension in the wire.

    29.9 ★★ A string has linear mass density \(5.0\,\mathrm{g/m}\) and is held under \(80\,\mathrm{N}\) of tension.

    1. Find the speed of transverse waves on it.
    2. What tension would be needed to double that speed?

    Section 29.4 — Energy of a Wave

    29.10 ★★ A string of linear density \(0.040\,\mathrm{kg/m}\) carries a wave of amplitude \(5.0\,\mathrm{cm}\) and angular frequency \(200\,\mathrm{rad/s}\) traveling at \(30\,\mathrm{m/s}\). Find the average power transported.

    29.11 ★★ A wave on a string transports \(120\,\mathrm{W}\). Without changing the string, tension, or frequency, you double the amplitude. What power does it now transport, and why?

    29.12 ★★★ [Real-world application: engineering.] A string with \(\mu = 6.0\times 10^{-2}\,\mathrm{kg/m}\) under tension \(150\,\mathrm{N}\) is to carry \(300\,\mathrm{W}\) of power at a frequency of \(50\,\mathrm{Hz}\). Find (a) the wave speed and (b) the required amplitude.

    29.13 ★★ A sinusoidal wave travels on a string (\(\mu = 20\,\mathrm{g/m}\)) at \(30\,\mathrm{m/s}\) with amplitude \(8.0\,\mathrm{mm}\) and frequency \(50\,\mathrm{Hz}\). Find the average power it transmits.

    Section 29.5 — Phasors

    29.14 ★ Two identical waves of amplitude \(3.0\,\mathrm{cm}\) travel together on a string with a phase difference of \(\phi\). Find the amplitude of the resultant wave when (a) \(\phi = 0\), (b) \(\phi = \pi/2\), (c) \(\phi = \pi\).

    29.15 ★★ Two waves, each of amplitude \(A\), interfere. The resultant amplitude is measured to be \(1.4A\). Find the phase difference \(\phi\) between them.

    29.16 ★★ [Conceptual.] Using the phasor picture of Figure 29.2, explain why the resultant amplitude of two equal waves can never exceed \(2A\), and identify the phase difference that achieves this maximum.

    Section 29.6 — Standing Waves and Resonance & the Guitar String

    29.17 ★ A string fixed at both ends is \(0.80\,\mathrm{m}\) long, and transverse waves travel on it at \(200\,\mathrm{m/s}\).

    1. Find the fundamental frequency.
    2. Find the frequencies of the second and third harmonics.

    29.18 ★★ Two waves traveling in opposite directions, \(y_1 = (2.0)\sin(4.0x - 3.0t)\) and \(y_2 = (2.0)\sin(4.0x + 3.0t)\) (SI-scaled, \(x\) in m), form a standing wave.

    1. Write the standing-wave function.
    2. Find the positions of the first three nodes (for \(x \ge 0\)).
    3. Find the amplitude of the element at \(x = 0.30\,\mathrm{m}\).

    29.19 ★★ [Real-world application: music — the guitar string.] A guitar string \(0.65\,\mathrm{m}\) long has linear density \(5.0\times 10^{-3}\,\mathrm{kg/m}\) and is tuned by adjusting its tension.

    1. What tension gives a fundamental frequency of \(330\,\mathrm{Hz}\) (the note E)?
    2. A guitarist frets the string, shortening its vibrating length to \(0.49\,\mathrm{m}\) at the same tension. What is the new fundamental frequency?
    3. To raise the open-string pitch by switching to a thinner string at the same length and tension, should the new string’s linear density be larger or smaller? Explain using \(f_1 = \tfrac{1}{2L}\sqrt{F_T/\mu}\).

    29.20 ★★★ [Driven string.] A string of length \(1.5\,\mathrm{m}\) and linear density \(2.0\times 10^{-3}\,\mathrm{kg/m}\), fixed at both ends, is driven by an oscillator at \(140\,\mathrm{Hz}\) while a hanging block sets the tension.

    1. What tension is needed to set up the third harmonic?
    2. What hanging mass does this require?
    3. If the tension is doubled, can a standing wave still be set up at \(140\,\mathrm{Hz}\)? If so, which harmonic; if not, explain.

    Challenge Problems

    29.21 ★★★ [Real-world application: engineering — structural health monitoring.] The tension in a cable-stayed bridge’s stay cables cannot be measured directly once the bridge is built, so engineers pluck a cable, record its vibration with an accelerometer, and infer the tension from the pitch. One stay is \(48\,\mathrm{m}\) long between its anchorages, has a mass of \(1150\,\mathrm{kg}\), and is effectively fixed at both ends. Its measured fundamental frequency is \(2.15\,\mathrm{Hz}\).

    1. Find the linear mass density \(\mu\) and the wave speed \(v\) on the cable.
    2. Find the tension in the cable, in newtons and in meganewtons.
    3. Show that \(F_T \propto f_1^2\), so that a fractional loss of tension shows up as a drop in pitch. If corrosion of an anchorage lets the tension fall by \(10\%\), what fundamental frequency would the accelerometer record?
    4. The accelerometer records usable data up to \(10\,\mathrm{Hz}\). How many harmonics of the original cable fall in that band, and what are their frequencies?

    29.22 ★★★ [Real-world application: music — natural harmonics.] A guitarist plays a “natural harmonic” by resting a finger lightly on a vibrating string (just touching it, not pressing it to the fret), which forces a node at the point of contact without changing the string’s length. One string is \(0.65\,\mathrm{m}\) long between nut and bridge and has a fundamental frequency of \(196\,\mathrm{Hz}\).

    1. Find the speed of transverse waves on the string.
    2. The guitarist touches the string one third of the way along, at \(x = \ell/3\). Which harmonics \(n\) have a node there? What is the lowest surviving frequency, and which musical interval above the open string is it?
    3. Repeat for a light touch at the midpoint, \(x = \ell/2\), and for a touch at \(x = \ell/4\).
    4. A harmonic played this way sounds thinner and purer than a fretted note of the same pitch. Explain this in terms of which harmonics the light touch suppresses, and why pressing the string to the fret at \(x = \ell/3\) instead produces a different pitch.

    29.23 ★★★ [Real-world application: engineering — a hanging mooring line.] A uniform rope of length \(L\) and mass \(M\) hangs vertically from a ship’s davit with nothing attached to its lower end. A sailor flicks the bottom of the rope, sending a transverse pulse up it. Because each element of the rope must support only the weight of the rope below it, the tension is not constant.

    1. Let \(y\) be the height above the free lower end. Show that the tension there is \(F_T(y) = \mu g y\), where \(\mu = M/L\), and hence that the pulse speed is \(v(y) = \sqrt{g y}\): independent of the rope’s mass.
    2. Using \(v = dy/dt\), set up and evaluate the integral for the time the pulse takes to travel the full length, and show that \(t = 2\sqrt{L/g}\).
    3. Evaluate \(t\) for a \(12\,\mathrm{m}\) rope.
    4. Compare your answer with the (incorrect) estimate you would get by assuming a uniform tension equal to the rope’s full weight \(Mg\) throughout. Express the ratio of the two answers exactly, and explain physically which part of the journey the uniform-tension estimate gets most wrong.

    This page titled 29.E: Waves I (Problems) was last modified on Thu, 12 Nov 2026 04:27:05 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by .