Opening the book…
The simple pendulum is not the only oscillator built on a restoring torque. Two close relatives appear often enough to deserve their own formulas: the torsion pendulum of this section and the physical pendulum of the next.
Suspend a disk or a bar from a thin wire fixed at its center and give it a twist. The wire resists, exerting a restoring torque proportional to the angle of twist, \(\tau = -\kappa\theta\), where \(\kappa\) (the Greek letter kappa) is the torsion constant of the wire. This is Hooke’s law for twisting, and the rotational form of Newton’s second law, \(\tau = I\,\frac{\mathrm{d}^{2}\theta}{\mathrm{d}t^{2}}\), leads once again to an SHM equation: now with the moment of inertia \(I\) in place of mass and \(\kappa\) in place of \(k\). The period is
Key Equation: Period of a torsion pendulum
\[T = 2\pi\sqrt{\frac{I}{\kappa}}. \tag{28.16}\]
The torsion pendulum is the working principle of the balance wheel in a mechanical watch and of the ultra-sensitive instruments used to measure tiny forces, including Cavendish’s famous weighing of the Earth.
This page titled 28.6: Torsion Pendulum was last modified on Thu, 12 Nov 2026 04:26:16 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Michael Ragsdale.
The book could not be loaded just now.