Opening the book…
Difficulty key: ★ introductory, ★★ standard, ★★★ challenging.
Section 6.1 — Friction
6.1 ★ A \(25\,\mathrm{kg}\) box rests on a level floor with \(\mu_s = 0.45\) and \(\mu_k = 0.35\).
- What is the maximum horizontal force you can apply before the box starts to move?
- Once it is sliding, what horizontal force keeps it moving at constant velocity?
- Explain why the answer to (b) is smaller than (a).
6.2 ★★ A \(6.0\,\mathrm{kg}\) block is held against a vertical wall by a horizontal push of \(40\,\mathrm{N}\). The coefficient of static friction is \(\mu_s = 0.50\).
- Draw the free-body diagram.
- Does the block slide, or does static friction hold it in place? Justify with a calculation.
- What is the smallest horizontal push that would hold the block in place?
6.3 ★★ A \(12\,\mathrm{kg}\) sled is pulled across level snow (\(\mu_k = 0.10\)) by a rope at \(30^\circ\) above the horizontal.
- Find the rope tension needed to pull the sled at constant velocity.
- Compare the normal force with the sled’s weight, and explain the difference.
6.4 ★★ A block is given a shove that sends it sliding up a ramp inclined at \(\theta\), with coefficient of kinetic friction \(\mu_k\).
- Show that on the way up its acceleration is directed down the slope with magnitude \(a = g(\sin\theta + \mu_k\cos\theta)\). Explain why the two terms add here but subtract for a block sliding down.
- Once the block has come to rest, under what condition on \(\mu_s\) does it stay there?
- For \(\mu_k = 0.20\), find the smallest angle at which a block, once nudged, will continue to slide down at constant velocity.
6.5 ★ [Conceptual.] Anti-lock brakes are designed to keep a car’s tires from skidding during hard braking.
- Using the relationship between \(\mu_s\) and \(\mu_k\), explain why a rolling (non-skidding) tire can stop a car in a shorter distance than a skidding one.
- Why is it harder to steer a car whose wheels are locked and skidding?
6.6 ★★ [Real-world: biology.] The synovial joints in your knees have an extraordinarily low coefficient of friction (see Table 6.1). If the cartilage surfaces in a knee press together with a normal force of \(500\,\mathrm{N}\) during a stride, estimate the kinetic friction force opposing the joint’s motion, and comment on why such low friction matters for a lifetime of use.
6.7 ★★★ [Experimental design.] You are given only a stopwatch, a meter stick, and a textbook, and asked to measure the coefficient of kinetic friction between the book and the floor.
- Describe a procedure (for example, giving the book a push and timing its slide) that yields \(\mu_k\) from measured distances and times.
- Derive the equation you would use, starting from Newton’s second law with friction.
- Identify the largest source of experimental uncertainty in your method.
6.8 ★★ A \(3.0\,\mathrm{kg}\) block (\(\mu_s = 0.40\), \(\mu_k = 0.30\)) sits on a ramp whose angle is slowly increased from zero.
- At what angle does the block begin to slide?
- Immediately after it begins to slide, what is its acceleration down the ramp?
6.9 ★ [Conceptual.] Static friction does not always oppose an object’s motion: sometimes it is what drives the motion.
- When you walk forward, in which direction does the static friction from the floor act on your shoe, and how does it propel you?
- A box rides in the bed of a pickup truck that accelerates forward without the box slipping. In which direction does static friction act on the box, and what is its role?
Section 6.2 — Resistive Forces
6.10 ★ [Conceptual.] Two identical sheets of paper are dropped from the same height, but one is crumpled into a tight ball.
- Which reaches the floor first, and why, in terms of the drag force and terminal speed?
- In a vacuum, which would reach the floor first?
6.11 ★★ A \(4.0\,\mathrm{g}\) ping-pong ball has a terminal speed of about \(9.0\,\mathrm{m/s}\) in air.
- What is the magnitude of the drag force on the ball when it falls at terminal speed?
- What is the drag force when the ball moves at half its terminal speed (using the quadratic model)?
6.12 ★★ [Real-world: engineering.] A spherical raindrop of radius \(1.5\,\mathrm{mm}\) falls through air (\(\rho = 1.2\,\mathrm{kg/m^3}\), drag coefficient \(C \approx 0.5\)). Taking the density of water as \(1000\,\mathrm{kg/m^3}\), estimate the raindrop’s terminal speed. (Hint: find the drop’s mass and cross-sectional area from its radius.)
Section 6.3 — Uniform Circular Motion
6.13 ★ A \(0.20\,\mathrm{kg}\) ball is whirled in a horizontal circle of radius \(0.80\,\mathrm{m}\), completing \(2.0\) revolutions per second.
- Find the ball’s speed.
- Find the magnitude of the centripetal force, and state what supplies it.
6.14 ★ [Conceptual.] A car rounds a flat, unbanked curve at constant speed.
- Which force provides the centripetal force?
- What happens, and why, if the road suddenly becomes icy?
6.15 ★★ A \(1200\,\mathrm{kg}\) car rounds a flat curve of radius \(45\,\mathrm{m}\). The coefficient of static friction between tires and road is \(\mu_s = 0.60\).
- What is the maximum speed at which the car can round the curve without skidding?
- Does this maximum speed depend on the car’s mass? Explain.
6.16 ★★ A pilot of mass \(80\,\mathrm{kg}\) flies a loop of radius \(250\,\mathrm{m}\) at a constant speed of \(60\,\mathrm{m/s}\).
- Find the force the seat exerts on the pilot at the bottom of the loop.
- Find the force at the top of the loop.
- Express each as a multiple of the pilot’s weight (the “\(g\)-force”).
6.17 ★★ [Conceptual.] At the top of a vertical loop, a ball on a string and a car on a track both move in a circle.
- For the ball on a string, what is the minimum speed at the top for the string to remain taut?
- Explain why this minimum speed does not depend on the mass.
6.18 ★★★ [Real-world: sports / engineering.] A race car of mass \(600\,\mathrm{kg}\) rounds a flat circular turn of radius \(100\,\mathrm{m}\). Aerodynamic “downforce” presses the car toward the track, adding to the normal force. The coefficient of static friction between tires and track is \(0.75\). If the car is on the verge of sliding when its speed is \(40.0\,\mathrm{m/s}\), find the magnitude of the downforce, and compare it with the car’s weight.
6.19 ★★★ [Real-world: engineering.] An amusement-park swing ride hangs seats from chains of length \(d = 2.50\,\mathrm{m}\) attached to the rim of a rotating platform of diameter \(D = 6.00\,\mathrm{m}\). When the ride turns at constant speed, the chains swing out to \(\theta = 30.0^\circ\) from the vertical. The seat plus rider may be treated as a mass on the end of each chain.
- Show that the radius of a seat’s circular path is \(r = D/2 + d\sin\theta\), and evaluate it.
- Find the speed of each seat. (Note that it does not depend on the rider’s mass.)
- If a chain can support at most \(1500\,\mathrm{N}\), what is the greatest rider-plus-seat mass that is safe at this angle?
6.20 ★★★ [Graph-reading.] A \(0.50\,\mathrm{kg}\) ball is swung in a vertical circle of radius \(1.0\,\mathrm{m}\), driven so that its speed stays essentially constant all the way around. The graph shows the string tension as a function of position, from the bottom (\(0^\circ\)) up one side to the top (\(180^\circ\)).
- At which position is the tension greatest, and at which is it least? Explain physically.
- Read the tension at the bottom and at the top from the graph, and use each to find the ball’s speed there. The two answers should agree: explain why they must.
- Show that for a ball circling at constant speed the tension at the bottom must exceed the tension at the top by exactly \(2mg\), and check this against the graph.
Challenge Problems
6.21 ★★★ A \(2.0\,\mathrm{kg}\) book rests on top of a \(5.0\,\mathrm{kg}\) board that sits on a frictionless table. Between the book and the board \(\mu_s = 0.30\) and \(\mu_k = 0.20\). A horizontal force \(F\) is applied to the board.
- What is the largest acceleration the book can have without slipping on the board?
- What is the largest force \(F\) that can be applied to the board while the two still move together?
- If \(F = 30\,\mathrm{N}\) (large enough to cause slipping), find the acceleration of each block.
6.22 ★★★ [Real-world: engineering.] A skydiver of total mass \(75\,\mathrm{kg}\) falls through air (\(\rho = 1.2\,\mathrm{kg/m^3}\), drag coefficient \(C = 1.0\)). Falling in a tight spread (smaller than the spread-eagle posture worked out in Section 6.2) her body presents a cross-sectional area \(A_1 = 0.55\,\mathrm{m^2}\); her open parachute presents \(A_2 = 25\,\mathrm{m^2}\). Use \(F_D = \tfrac12 C\rho A v^2\).
- Find her terminal speed in free fall, before the chute opens.
- Find her terminal speed under the open parachute.
- By what factor does opening the chute reduce the terminal speed, and why?
- At the instant the chute fully opens she is still moving at the free-fall terminal speed. Find her acceleration at that instant, and express it in units of \(g\).
- Your answer to (d) is far larger than any human could survive. Real canopies take a second or two to inflate. Explain how that changes the calculation, and why the peak deceleration in an actual jump is only a few \(g\).
6.23 ★★★ [Real-world: engineering.] A curve of radius \(120\,\mathrm{m}\) on a high-speed test track is to be banked. (Hint for (b) and (c): resolve \(\vec{F}_N\) and \(\vec{F}_{f,s}\) into horizontal and vertical components, with \(F_{f,s} = \mu_s F_N\) at the limit, and solve the two equations for \(v\). Friction points down the bank in one case and up the bank in the other.)
- Find the banking angle for which a car needs no friction to round the curve at the design speed \(25\,\mathrm{m/s}\).
- At that banking angle, with \(\mu_s = 0.40\) between tires and road, find the maximum speed at which the car can take the curve without sliding outward.
- Find the minimum speed below which it tends to slide inward (down the bank).
- Comment on the range of safe speeds, compared with the single safe speed of an unbanked curve.
- Public highways are rarely banked more than about \(6^\circ\), far less than your answer to (a). Given your answers above, suggest why highway engineers accept a bank well below the ideal one.
This page titled 6.E: The Laws of Motion II (Problems) was last modified on Thu, 12 Nov 2026 04:26:50 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Michael Ragsdale.
The book could not be loaded just now.