39.2: Photoelectric Effect

Physics: A Foundation for Scientists and Engineers · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    39.2: Photoelectric Effect

    Shine light on a clean metal surface and, under the right conditions, electrons fly off. This photoelectric effect baffled classical physics on every count. Classically, light is a wave whose energy depends on its intensity, so a bright enough beam of any color should eventually shake electrons loose, and a dim beam should work given time. Experiment said otherwise: below a certain cutoff frequency no electrons emerge no matter how intense or how long the light shines; above it, electrons emerge instantly even for feeble light, and their maximum kinetic energy depends on the light’s frequency, not its intensity.

    Einstein explained it all in 1905 with the photon. If light arrives as quanta of energy \(hf\), then one photon ejects one electron, handing over its whole energy. Part goes to freeing the electron from the metal (the work function \(\phi\)) and the rest becomes kinetic energy (Figure 39.3):

    Key Equation: Photoelectric equation

    \[K_{\max} = hf - \phi. \tag{39.4}\]

    An energy diagram of the photoelectric effect.
    Figure 39.3. Energy bookkeeping in the photoelectric effect. One photon gives its entire energy \(hf\) to one electron. The least tightly bound electrons need the work function \(\phi\) just to escape, and whatever is left over is their kinetic energy, so the fastest electrons have \(K_{\max} = hf - \phi\). If \(hf < \phi\) the arrow never reaches the dashed line and no electron escapes.
    Figure descriptionAn energy diagram of the photoelectric effect. A shaded block at the bottom represents the metal, its top edge marking the energy of the most loosely bound electron. A dashed line higher up marks the energy of an electron just free of the metal and at rest; the gap between the two is the work function phi. A wavy photon arrives from the left and hands its whole energy h f to one electron, drawn as a tall red arrow rising from the top of the metal. Brackets on the right split the arrow's height into two parts: the lower part, phi, is spent escaping the metal, and the upper part, the remainder, is the electron's maximum kinetic energy K max.
    Photoelectric effect: maximum kinetic energy of electrons against light frequency.
    Figure 39.4. Photoelectric effect. The maximum kinetic energy of ejected electrons rises linearly with light frequency, \(K_{\max} = hf - \phi\). Below the cutoff frequency \(f_c = \phi/h\) no electrons are emitted. Every metal gives a line with the same slope, Planck’s constant \(h\); a metal with a larger work function (B) has its line shifted to a higher cutoff frequency.
    Figure descriptionA graph of the maximum kinetic energy of ejected electrons against the frequency of the incident light. Two metals are shown. For metal A the data form a red straight line of slope h, Planck's constant. The line crosses zero at the cutoff frequency f sub c comma A; to the left of that point, shaded as a no-emission region, metal A ejects no electrons at all no matter how bright the light. Extending the line backwards as a dashed segment to the vertical axis gives an intercept of minus phi sub A, the work function of metal A. Metal B, in blue, gives a parallel line with the same slope, starting at a higher cutoff frequency f sub c comma B and extrapolating to a lower intercept, minus phi sub B: a larger work function.

    Now everything fits (Figure 39.4). If \(hf < \phi\) the photon simply lacks the energy to free an electron, hence a cutoff frequency \(f_c = \phi/h\), or equivalently a longest cutoff wavelength \(\lambda_c = hc/\phi\), beyond which nothing happens. Above cutoff, brighter light means more photons and thus more electrons, but not more energetic ones; only raising the frequency raises \(K_{\max}\). A graph of \(K_{\max}\) versus frequency is a straight line of slope \(h\): a way to measure Planck’s constant directly. Every metal gives a line with that same slope; only the cutoff frequency and the intercept \(-\phi\) change from one metal to another. For these problems the combination \(hc = 1240\,\mathrm{eV\cdot nm}\) is invaluable.

    Measuring \(K_{\max}\): the stopping potential. How is the electrons’ kinetic energy actually measured? In a phototube (Figure 39.5(a)), light falls on a metal emitter inside a vacuum tube, and the ejected electrons cross to a collector, registering as a current \(I\) on the ammeter. Making the collector negative relative to the emitter pushes the electrons back. As this reverse voltage grows, fewer electrons make it across, until at the stopping potential \(V_s\) even the fastest ones are turned back and the current drops to zero. At that point the electric field has taken away all of the fastest electron’s kinetic energy, so

    \[K_{\max} = eV_s .\]

    In electron-volts the bookkeeping is especially simple: a stopping potential of \(1.67\,\mathrm{V}\) means \(K_{\max} = 1.67\,\mathrm{eV}\). Figure 39.5(b) shows the decisive evidence: brighter light at the same frequency gives a larger current (more electrons) but exactly the same stopping potential (the same \(K_{\max}\)).

    Measuring the photoelectric effect, in two panels.
    Figure 39.5. Measuring the photoelectric effect. (a) Light ejects electrons from a metal emitter in a vacuum tube; those that reach the collector register as a current. An adjustable voltage can speed them up or, when reversed, turn them back. (b) Current versus voltage at one frequency. Reversing the voltage stops the current at the stopping potential \(-V_s\), where \(eV_s = K_{\max}\). Brighter light gives more current but the same \(V_s\): more electrons, not faster ones.
    Figure descriptionMeasuring the photoelectric effect, in two panels. Panel a, the apparatus: a vacuum tube containing two metal plates, an emitter on the left and a collector on the right. Wavy gold arrows of light of frequency f strike the emitter, and green electrons with arrows cross the tube toward the collector. Outside the tube a wire loop connects the two plates through a battery marked adjustable V, with a red arrow through it, and an ammeter marked A. Panel b, current I against voltage V for light of one frequency: two curves, a solid red one labelled bright light and a dashed blue one labelled dim light. Both are zero for voltages more negative than minus V sub s, rise steeply just above it, and level off at positive voltage, the bright curve leveling off twice as high. A note points to the open circle at minus V sub s: current stops at the same V sub s for both.
    Example 39.3: Sodium under ultraviolet light

    A sodium surface (work function \(\phi = 2.46\,\mathrm{eV}\)) is illuminated with light of wavelength \(300\,\mathrm{nm}\). (a) Find the maximum kinetic energy of the ejected electrons. (b) Find the cutoff wavelength for sodium.

    Solution

    (a) The photon energy is \(hf = hc/\lambda = (1240\,\mathrm{eV\cdot nm})/(300\,\mathrm{nm}) = 4.13\,\mathrm{eV}\). Then

    \[K_{\max} = hf - \phi = 4.13\,\mathrm{eV} - 2.46\,\mathrm{eV} = \boxed{1.67\,\mathrm{eV}}.\]

    (b) The cutoff wavelength is the longest that still frees an electron, \(hf = \phi\):

    \[\lambda_c = \frac{hc}{\phi} = \frac{1240\,\mathrm{eV\cdot nm}}{2.46\,\mathrm{eV}} = \boxed{504\,\mathrm{nm}}.\]

    Light longer than \(504\,\mathrm{nm}\) (greenish to red) ejects no electrons from sodium, however bright.

    Checkpoint 39.1

    Light of a single frequency ejects electrons from a metal. (a) The intensity is doubled at the same frequency. What happens to the number of electrons ejected per second, and to their maximum kinetic energy? (b) The frequency is increased at the same intensity. What happens to each? (c) Which of these results did the classical wave picture of light get wrong?

    Answer

    Answers to Checkpoints

    Checkpoint 39.1. (a) Doubling the intensity doubles the number of photons arriving per second, so twice as many electrons are ejected. Each photon still carries \(hf\), so \(K_{\max} = hf - \phi\) is unchanged. (b) \(K_{\max}\) increases, since each photon now carries more energy. At the same intensity, more energy per photon means fewer photons per second, so somewhat fewer electrons are ejected. (c) The classical picture predicted that brighter light, delivering more energy, would eject electrons with more kinetic energy, and that any frequency would eject electrons if the light were bright enough. Experiment showed that \(K_{\max}\) depends on frequency, not intensity, and that below the threshold frequency no electrons emerge at all.


    This page titled 39.2: Photoelectric Effect was last modified on Thu, 12 Nov 2026 04:27:01 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Michael Ragsdale.