Opening the book…
Every wave does one essential job: it transports energy from one place to another without transporting matter. An electromagnetic wave carries its energy in its electric and magnetic fields, and the rate of that transport is described by the Poynting vector \(\vec{S}\), defined as
\[\vec{S} = \frac{1}{\mu_0}\,\vec{E}\times\vec{B}. \tag{27.18}\]
Its direction is the direction of energy flow (the same \(\vec{E}\times\vec{B}\) along which the wave travels), and its magnitude is the power per unit area, in watts per square meter. Because \(\vec{E}\) and \(\vec{B}\) are perpendicular, the magnitude is simply \(S = EB/\mu_0\), and using \(E = cB\) from equation (27.17) we can write it with either field alone:
\[S = \frac{1}{\mu_0}EB = \frac{1}{c\mu_0}E^2 = \frac{c}{\mu_0}B^2. \tag{27.19}\]
The Poynting vector is an instantaneous quantity, and since \(E^2\) oscillates between zero and its peak, \(S\) flickers far too fast to measure directly. What instruments (and eyes) respond to is its time average, the intensity \(I\) of the wave: the average power delivered per unit area of a surface facing the wave. Averaging \(\sin^2\) over a cycle gives a factor of \(\tfrac12\), conveniently absorbed by writing the fields as root-mean-square values, \(E_{\text{rms}} = E_m/\sqrt2\), just as for the alternating currents of Chapter 26:
Key Equation: Intensity of an electromagnetic wave
\[I = S_{\text{avg}} = \frac{1}{c\mu_0}E_{\text{rms}}^2 = \frac{c}{\mu_0}B_{\text{rms}}^2 = \frac{E_m^2}{2c\mu_0}. \tag{27.20}\]
For a source that radiates power \(P\) uniformly in all directions, that power spreads over the surface of an ever-growing sphere of area \(4\pi r^2\), so the intensity falls off as the inverse square of the distance, for the same geometric reason as the gravitational field of Chapter 13:
\[I = \frac{P}{4\pi r^2}. \tag{27.21}\]
Figure 27.3 shows the geometry. A beam that does not spread, such as a laser’s, avoids this dilution almost entirely, which is why a feeble laser can be far more intense than a powerful lamp.
Example 27.3: The fields in sunlight
At the top of Earth’s atmosphere, sunlight arrives with an intensity of about \(I = 1.36\times 10^{3}\,\mathrm{W/m^2}\) (the “solar constant”). Find the rms electric field and rms magnetic field of this light.
Solution
Solve equation (27.20) for the electric field. The combination \(c\mu_0 = (3.00\times10^8)(1.257\times10^{-6}) = 377\,\mathrm{\Omega}\) is called the impedance of free space:
\[E_{\text{rms}} = \sqrt{I\,c\mu_0} = \sqrt{(1.36\times10^3)(377)} = \boxed{716\,\mathrm{V/m}}.\]
The magnetic field follows from \(E = cB\):
\[B_{\text{rms}} = \frac{E_{\text{rms}}}{c} = \frac{716}{3.00\times10^8} = \boxed{2.39\times 10^{-6}\,\mathrm{T}}.\]
The magnetic field is only a couple of microtesla, weaker than a refrigerator magnet, yet it is an equal partner with the electric field in carrying the Sun’s energy. The factor of \(c\) between them is exactly what hides \(\vec{B}\) from everyday notice.
Example 27.4: A laser pointer versus a light bulb
Compare the intensity of (a) a \(1.0\,\mathrm{mW}\) laser pointer whose beam has a cross-sectional area of \(1.0\,\mathrm{mm^2}\) with (b) the light from a bulb that radiates \(100\,\mathrm{W}\) of electromagnetic power uniformly in all directions, at a distance of \(1.0\,\mathrm{m}\). (c) Find the amplitude of the electric field in the laser beam.
Solution
(a) The laser’s power is confined to its beam, so
\[I = \frac{P}{A} = \frac{1.0\times10^{-3}\,\mathrm{W}}{1.0\times10^{-6}\,\mathrm{m^2}} = \boxed{1.0\times 10^{3}\,\mathrm{W/m^2}}.\]
(b) The bulb’s power spreads over a sphere, so by equation (27.21)
\[I = \frac{P}{4\pi r^2} = \frac{100}{4\pi(1.0)^2} = \boxed{8.0\,\mathrm{W/m^2}}.\]
The one-milliwatt laser is more than a hundred times as intense as the hundred-watt bulb, and about as intense as full sunlight. That is why a laser pointer must never be aimed at anyone’s eye.
(c) From equation (27.20), \(E_m = \sqrt{2c\mu_0 I} = \sqrt{2(377)(1.0\times10^{3})} = \boxed{870\,\mathrm{V/m}}\).
Checkpoint 27.4
A streetlight looks four times brighter to you than to a friend standing farther down the road. Ignoring obstructions, how many times farther from the lamp is your friend? (Use the inverse-square law.)
Answers to Checkpoints
Checkpoint 27.4. Intensity from a point source falls as \(1/r^2\). The lamp looks four times as bright to you as to your friend, so your friend’s distance squared is four times yours: your friend is \(\sqrt{4} = 2\) times farther away.
This page titled 27.4: Energy Carried by Electromagnetic Waves was last modified on Thu, 12 Nov 2026 04:26:56 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Michael Ragsdale.
The book could not be loaded just now.