Opening the book…
We now have everything we need to solve problems. Nearly every one yields to the same systematic strategy:
- Isolate the object and draw its free-body diagram (§5.3).
- Choose axes. Align them with the acceleration where possible; tilt them to the incline on a ramp.
- Resolve each force into components along the axes.
- Write Newton’s second law for each axis: \(\sum F_x = m a_x\), \(\sum F_y = m a_y\). For an object in equilibrium along an axis, the right side is zero.
- Solve the resulting equations for the unknowns. For connected objects, write the second law for each body and combine the equations.
Objects on an incline
Example 5.3: Pushing a block up a frictionless ramp
A block weighing \(170\,\mathrm{N}\) is pushed up a frictionless ramp inclined at \(25^\circ\) above the horizontal. The push is directed up the slope, and the block accelerates up the slope at \(1.3\,\mathrm{m/s^2}\). What is the magnitude of the applied force?
Solution
Step 1: Convert the weight to a mass. The second law needs the mass, but we were given the weight. Since \(F_g = mg\), divide both sides by \(g\):
\[m = \frac{F_g}{g} = \frac{170\,\mathrm{N}}{9.8\,\mathrm{m/s^2}} = 17.3\,\mathrm{kg}.\]
(The units work because \(\,\mathrm{N} = \,\mathrm{kg\cdot m/s^2}\), and dividing by \(\,\mathrm{m/s^2}\) leaves \(\,\mathrm{kg}\).)
Step 2: Forces and axes. Three forces act on the block: the weight \(\vec{F}_g\) (down), the normal force \(\vec{F}_N\) (perpendicular to the ramp), and the applied push \(\vec{F}_P\) (up the slope). Tilt the axes so \(+x\) points up the slope, as in Figure 5.1. Then \(\vec{F}_P\) lies entirely along \(+x\), the normal force has no \(x\)-component at all, and only the weight must be resolved: its component along the slope is \(F_g\sin\theta\), pointing down the slope, so it enters as \(-F_g\sin\theta\).
Step 3: Newton’s second law along the slope. The acceleration is up the slope, along \(+x\):
\[\sum F_x = m a \quad\Longrightarrow\quad F_P - F_g\sin\theta = m a.\]
We want \(F_P\), so add \(F_g\sin\theta\) to both sides:
\[F_P = m a + F_g\sin\theta = (17.3\,\mathrm{kg})(1.3\,\mathrm{m/s^2}) + (170\,\mathrm{N})\sin 25^\circ.\]
Each term on the right is a force. The first, \(ma = 22.5\,\mathrm{N}\), is what it takes to accelerate the block; the second, \(F_g\sin 25^\circ = (170\,\mathrm{N})(0.4226) = 71.8\,\mathrm{N}\), is what it takes just to hold the block against sliding back down. Adding,
\[F_P = 22.5\,\mathrm{N} + 71.8\,\mathrm{N} \approx \boxed{94\,\mathrm{N}}.\]
Check. If the block moved up at constant speed, \(a = 0\) and the push would be exactly \(F_g\sin 25^\circ = 71.8\,\mathrm{N}\); every newton beyond that goes into accelerating the block. Our answer sits about 30% above the constant-speed value, which is the right size for the modest \(1.3\,\mathrm{m/s^2}\) we were given. Note also that \(F_P\) is well under the full weight of \(170\,\mathrm{N}\): a ramp lets you raise a load with less than its weight, which is the whole point of a ramp.
Example 5.4: A car pulled up an incline by an angled cable
An \(1100\,\mathrm{kg}\) car is pulled up a frictionless \(15^\circ\) slope by a cable that exerts a \(9000\,\mathrm{N}\) force directed \(20^\circ\) above the slope surface. Find the car’s acceleration.
Solution
Step 1: Choose axes and resolve the forces. Tilt the axes to the incline: \(+x\) up the slope, \(+y\) perpendicular to it and away from the surface. Three forces act on the car.
- The cable tension \(\vec{F}_T\) makes an angle of \(20^\circ\) with the slope, that is, with the \(x\)-axis. The \(x\)-axis is adjacent to that angle, so \(F_{T,x} = F_T\cos 20^\circ\) and \(F_{T,y} = F_T\sin 20^\circ\), both positive.
- The weight \(\vec{F}_g = m\vec{g}\) has components \(-mg\sin 15^\circ\) along \(x\) (down the slope) and \(-mg\cos 15^\circ\) along \(y\) (into the slope), exactly as in Figure 5.1.
- The normal force \(\vec{F}_N\) is entirely along \(+y\).
Note that the \(20^\circ\) is measured from the slope, not from the horizontal, so it goes straight into the tilted axes with no conversion. That is one more reason to tilt the axes.
Step 2: Newton’s second law along the slope. The car does not leave the ramp or sink into it, so \(a_y = 0\); the acceleration we seek is \(a_x\). The normal force has no \(x\)-component, so it does not appear:
\[\sum F_x = m a_x \quad\Longrightarrow\quad F_T\cos 20^\circ - mg\sin 15^\circ = m a_x.\]
Dividing both sides by \(m\) isolates the acceleration:
\[a_x = \frac{F_T\cos 20^\circ - mg\sin 15^\circ}{m}.\]
Step 3: Substitute. With \(mg = (1100\,\mathrm{kg})(9.8\,\mathrm{m/s^2}) = 10780\,\mathrm{N}\),
\[\begin{aligned}F_T\cos 20^\circ &= (9000\,\mathrm{N})(0.940) = 8457\,\mathrm{N}, \\ mg\sin 15^\circ &= (10780\,\mathrm{N})(0.259) = 2790\,\mathrm{N},\end{aligned}\]
so
\[a_x = \frac{8457\,\mathrm{N} - 2790\,\mathrm{N}}{1100\,\mathrm{kg}} = \frac{5667\,\mathrm{N}}{1100\,\mathrm{kg}} \approx \boxed{5.2\,\mathrm{m/s^2}} \text{ up the slope.}\]
Check: does the car stay on the ramp? The \(y\)-equation tells us. With \(a_y = 0\), \(\sum F_y = 0\) reads
\[F_N + F_T\sin 20^\circ - mg\cos 15^\circ = 0 \quad\Longrightarrow\quad F_N = mg\cos 15^\circ - F_T\sin 20^\circ.\]
Numerically \(F_N = 10\,413\,\mathrm{N} - 3078\,\mathrm{N} \approx 7300\,\mathrm{N}\). A surface can only push, never pull, so a normal force must be positive; had this come out negative, the cable would be lifting the car off the ramp and the assumption \(a_y = 0\) would be wrong. Notice too that \(F_N\) is less than \(mg\cos 15^\circ\): the upward tilt of the cable carries part of the load the ramp would otherwise support.
Equilibrium of a hanging object
Example 5.5: Will the traffic light’s cables hold?
A traffic light weighing \(122\,\mathrm{N}\) hangs from a point where three cables meet, as in Figure 5.2. The light hangs from a vertical cable; that cable is tied at a knot to two others that run up to a support, making angles of \(37.0^\circ\) and \(53.0^\circ\) with the horizontal. The two upper cables will break if the tension in either exceeds \(100\,\mathrm{N}\). Does the light hang safely, or does a cable break?
Solution
Step 1: The light. Only two forces act on it: its weight (\(122\,\mathrm{N}\), down) and the tension \(F_{T3}\) of the vertical cable (up). The light is in equilibrium, so the two must cancel:
\[F_{T3} - F_g = 0 \quad\Longrightarrow\quad F_{T3} = F_g = 122\,\mathrm{N}.\]
Step 2: The knot. The upper cables do not touch the light, so we move to the knot, where all three cables meet. Three forces act on it: \(F_{T1}\) (up and to the left at \(37^\circ\) above the horizontal), \(F_{T2}\) (up and to the right at \(53^\circ\)), and the downward pull \(F_{T3} = 122\,\mathrm{N}\). Each upper tension makes its angle with the horizontal, so the horizontal component gets the cosine and the vertical component gets the sine; the signs come from the sketch (\(F_{T1}\) points left, so its \(x\)-component is negative). The knot is in equilibrium, so \(\sum F_x = 0\) and \(\sum F_y = 0\):
\[\begin{aligned}x:&\quad -F_{T1}\cos 37^\circ + F_{T2}\cos 53^\circ = 0, \\ y:&\quad \phantom{-}F_{T1}\sin 37^\circ + F_{T2}\sin 53^\circ - F_{T3} = 0.\end{aligned}\]
Step 3: Solve two equations in two unknowns. Use the simpler equation to express one unknown in terms of the other, then substitute into the second. The \(x\)-equation contains no \(F_{T3}\); add \(F_{T1}\cos 37^\circ\) to both sides and divide by \(\cos 37^\circ\):
\[F_{T1}\cos 37^\circ = F_{T2}\cos 53^\circ \quad\Longrightarrow\quad F_{T1} = F_{T2}\,\frac{\cos 53^\circ}{\cos 37^\circ} = F_{T2}\,\frac{0.602}{0.799} = 0.754\,F_{T2}.\]
Now replace \(F_{T1}\) in the \(y\)-equation with \(0.754\,F_{T2}\), and move \(F_{T3}\) to the right-hand side. Every remaining term contains \(F_{T2}\), so factor it out:
\[\begin{aligned}(0.754\,F_{T2})\sin 37^\circ + F_{T2}\sin 53^\circ &= 122\,\mathrm{N} \\ (0.454 + 0.799)\,F_{T2} &= 122\,\mathrm{N} \\ 1.252\,F_{T2} &= 122\,\mathrm{N}.\end{aligned}\]
Divide by \(1.252\), then return to the \(x\)-equation for \(F_{T1}\):
\[F_{T2} = \frac{122\,\mathrm{N}}{1.252} = 97.4\,\mathrm{N}, \qquad F_{T1} = (0.754)(97.4\,\mathrm{N}) = 73.4\,\mathrm{N}.\]
The larger of the two upper tensions, \(F_{T2} = 97.4\,\mathrm{N}\), is just under the \(100\,\mathrm{N}\) breaking point, so \(\boxed{\text{the light hangs safely}}\), though with very little margin to spare.
Check. Because \(37^\circ + 53^\circ = 90^\circ\), the two upper cables are perpendicular to each other. Tilting the axes to lie along them, each tension must balance the component of the \(122\,\mathrm{N}\) weight along its own cable: \(F_{T1} = (122\,\mathrm{N})\sin 37^\circ = 73.4\,\mathrm{N}\) and \(F_{T2} = (122\,\mathrm{N})\cos 37^\circ = 97.4\,\mathrm{N}\). Same answers, with no simultaneous equations. It also makes sense that the steeper cable carries more of the load: it points more nearly straight up, the direction the weight must be opposed.
Connected objects
When two objects are joined by a cord, they share the same magnitude of acceleration (the cord is inextensible), and the cord transmits the same tension to each. Write the second law for each body separately, then solve the equations together.
Example 5.6: The Atwood machine
Two blocks of masses \(m_1\) and \(m_2\) (with \(m_1 > m_2\)) hang from the two ends of a light cord that passes over an ideal pulley, as in Figure 5.3. This arrangement is called an Atwood machine. Find the magnitude of the acceleration of the blocks and the tension in the cord.
Solution
Step 1: Choose a sign convention that matches the motion. Because \(m_1 > m_2\), the heavier block descends and the lighter one rises; the cord does not stretch, so both move with the same acceleration magnitude \(a\). Take “downward” as positive for \(m_1\) and “upward” as positive for \(m_2\), so that a single positive \(a\) describes both. (Using “up” for both blocks would also work, but then one block would have acceleration \(+a\) and the other \(-a\), which is an extra sign to keep track of.)
Step 2: Newton’s second law for each block. Two forces act on each block: its weight and the cord tension \(F_T\) (the same on both sides of an ideal pulley). For \(m_1\), the weight points in the positive (down) direction and the tension in the negative; for \(m_2\) it is the other way around:
\[\begin{aligned}m_1:&\quad m_1 g - F_T = m_1 a, \\ m_2:&\quad F_T - m_2 g = m_2 a.\end{aligned}\]
Step 3: Eliminate the tension. Two equations, two unknowns (\(a\) and \(F_T\)). The tension appears as \(-F_T\) in the first and \(+F_T\) in the second, so adding the equations makes it cancel. Add the left sides together and the right sides together:
\[m_1 g - F_T + F_T - m_2 g = m_1 a + m_2 a \;\Longrightarrow\; (m_1 - m_2)g = (m_1 + m_2)a.\]
The last step factors \(g\) out of the left side and \(a\) out of the right. Dividing both sides by \((m_1 + m_2)\),
\[\boxed{\,a = \frac{m_1 - m_2}{m_1 + m_2}\,g\,}.\]
Step 4: Find the tension. Solve the second equation for \(F_T\) by adding \(m_2 g\) to both sides, then substitute for \(a\):
\[F_T = m_2 g + m_2 a = m_2\left(g + \frac{m_1 - m_2}{m_1 + m_2}\,g\right).\]
To add the terms in parentheses, write \(g\) over the common denominator, as \((m_1 + m_2)g/(m_1 + m_2)\). Then
\[F_T = m_2 g\,\frac{(m_1 + m_2) + (m_1 - m_2)}{m_1 + m_2} = m_2 g\,\frac{2m_1}{m_1 + m_2},\]
since the \(m_2\)’s cancel in the numerator. Therefore
\[\boxed{\,F_T = \frac{2 m_1 m_2}{m_1 + m_2}\,g\,}.\]
Checks. The result passes two limiting cases. If \(m_1 = m_2\), then \(a = 0\) and \(F_T = 2m_1^2 g/(2m_1) = m_1 g\): equal masses balance, and the cord simply holds each up. And if \(m_2 \to 0\), then \(a \to g\) and \(F_T \to 0\): the lone block \(m_1\) is in free fall. Notice also that \(F_T\) lies between the two weights, \(m_2 g < F_T < m_1 g\): it must, or the heavier block would not fall and the lighter one would not rise.
As a numerical instance, \(m_1 = 3.0\,\mathrm{kg}\) and \(m_2 = 2.0\,\mathrm{kg}\) give \(a = (1.0/5.0)(9.8) = 1.96\,\mathrm{m/s^2} \approx 2.0\,\mathrm{m/s^2}\) and \(F_T = (2)(3.0)(2.0)(9.8)/5.0 = 23.5\,\mathrm{N}\). As a check, the first equation gives the same tension: \(F_T = m_1(g - a) = (3.0)(9.8 - 1.96) = 23.5\,\mathrm{N}\). The tension is indeed between the two weights, \(19.6\,\mathrm{N}\) and \(29.4\,\mathrm{N}\).
Apparent weight
Example 5.7: A fish on a scale in an elevator
A fish hangs from a spring scale attached to the ceiling of an elevator (Figure 5.4). A spring scale reads the tension in its spring, that is, the force it must exert to support whatever hangs from it. When the elevator is at rest, or moving at any constant velocity, the scale reads the fish’s true weight. What does it read when the elevator accelerates? Evaluate the readings for a fish of weight \(40.0\,\mathrm{N}\) when the elevator accelerates at \(a_y = 2.00\,\mathrm{m/s^2}\), first upward and then downward.
Solution
Step 1: The general result. Two forces act on the fish: the scale’s upward pull \(F_T\) (the reading we want) and the weight \(F_g = mg\) downward. The fish moves with the elevator, so it has the elevator’s acceleration \(a_y\). Take up as positive. Newton’s second law:
\[F_T - mg = m a_y.\]
Add \(mg\) to both sides, then factor out the \(m\) that both terms share:
\[F_T = mg + m a_y = m(g + a_y).\]
This is the apparent weight: it exceeds the true weight when the elevator accelerates upward (\(a_y > 0\)) and falls short when the elevator accelerates downward (\(a_y < 0\)). The sign of \(a_y\) does all the work; the formula itself never changes.
Step 2: The mass. The fish’s mass is \(m = F_g/g = (40.0\,\mathrm{N})/(9.80\,\mathrm{m/s^2}) = 4.08\,\mathrm{kg}\). (The data are given to three significant figures, so we carry \(g\) to three here as well.)
Step 3: Evaluate. Accelerating upward at \(2.00\,\mathrm{m/s^2}\), so \(a_y = +2.00\,\mathrm{m/s^2}\):
\[F_T = (4.08\,\mathrm{kg})(9.80 + 2.00)\,\mathrm{m/s^2} = (4.08)(11.80) \approx \boxed{48.2\,\mathrm{N}}.\]
Accelerating downward at \(2.00\,\mathrm{m/s^2}\), so \(a_y = -2.00\,\mathrm{m/s^2}\) and the sum in parentheses becomes a difference:
\[F_T = (4.08\,\mathrm{kg})(9.80 + (-2.00))\,\mathrm{m/s^2} = (4.08)(7.80) \approx \boxed{31.8\,\mathrm{N}}.\]
Check. Factoring out \(mg = F_g\) instead of \(m\) gives \(F_T = F_g(1 + a_y/g)\), which uses the given weight directly and never needs the mass. Upward: \((40.0\,\mathrm{N})(1 + 2.00/9.80) = (40.0)(1.204) = 48.2\,\mathrm{N}\). Downward: \((40.0)(1 - 0.204) = 31.8\,\mathrm{N}\). The form also shows the size of the effect at a glance: accelerating at about a fifth of \(g\) changes the reading by about a fifth.
The scale reads “too heavy” on the way up and “too light” on the way down, exactly the sensation you feel in your own legs as an elevator starts and stops. Were the cable to snap so that \(a_y = -g\), the reading would be \(m(g - g) = 0\): the fish would be weightless, in free fall along with the scale.
Note: Four pitfalls worth watching for
- There is no “force of motion.” A coasting object has no forward force on it. If your free-body diagram carries an arrow pointing the way the object happens to be moving, and no rope, hand, or surface is producing it, erase the arrow.
- \(F_N = mg\) is a result, not a rule. It holds for an object on level ground with nothing else pressing down on it, and almost nowhere else. Find \(F_N\) by applying the second law perpendicular to the surface.
- Action–reaction pairs never share a diagram. The two forces act on different objects, so they can never cancel each other out.
- Equilibrium means \(a = 0\), not \(v = 0\). A truck rolling down the highway at a steady \(25\,\mathrm{m/s}\) is in equilibrium just as surely as a parked one.
This page titled 5.5: Applying Newton’s Laws was last modified on Thu, 12 Nov 2026 04:26:42 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Michael Ragsdale.
The book could not be loaded just now.