Opening the book…
The electricity delivered to your home does not flow steadily in one direction. Sixty times a second in North America, fifty in most of the world, the voltage at the outlet swings from positive to negative and back, and the current in every lamp and appliance reverses direction with it. This is alternating current, and the whole electrical grid is built on it. Part of the reason is that generators produce ac naturally (Section 24.4). The larger reason is the long trip from the power plant to your home. Power travels efficiently only at high voltage, where the current, and with it the \(I^2R\) loss in the lines, is small (Example 20.10). Nobody wants hundreds of kilovolts in a kitchen, though, so the voltage must be stepped up for the journey and back down at the end, and as Chapter 25 showed, transformers can do that only for a changing current. Ac is also easier to switch off safely: the current passes through zero twice in every cycle, which helps a circuit breaker interrupt it cleanly. Today, power electronics can convert between ac and dc at high voltage, and some of the longest transmission lines and undersea cables now carry dc, but the grid that reaches your outlets is still ac.
Alternating currents make circuit elements behave in new ways. A capacitor, which blocks a steady current completely, passes an alternating one, and passes it more easily the faster it alternates. An inductor does the opposite. Combine them, and a circuit can respond strongly to one frequency and ignore all others, which is how a radio picks out a single station from the hundreds of signals reaching its antenna at once. This chapter begins with the natural oscillations of a circuit containing only a capacitor and an inductor, then follows resistors, capacitors, and inductors driven by an alternating source, one at a time and together, and ends with the power that ac circuits deliver.
Learning Objectives
- Describe the oscillation of charge and energy in an LC circuit, and find its frequency.
- Use rms values and phasors to describe alternating currents and voltages.
- Find the current in a resistor, a capacitor, and an inductor driven by an ac source, using reactance and phase.
- Analyze a series RLC circuit, using impedance and the phase constant, and find its resonant frequency.
- Calculate the average power delivered to an ac circuit, using the power factor.
This page titled 26: AC Circuits was last modified on Thu, 12 Nov 2026 04:26:39 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Michael Ragsdale.
The book could not be loaded just now.