Opening the book…
In Section 15.4 we found the force that a continuous charge distribution exerts on a point charge \(q\), and noticed that \(q\) always factors out. Dividing it out gives the field. Split the distribution into elements \(dq\), each acting as a point charge with field \(d\vec{E} = k_e\,(dq/r^2)\,\hat{r}\), and add them all up:
Key Equation: Electric field of a continuous charge distribution
\[\vec{E} = \int d\vec{E} = k_e\int \frac{dq}{r^2}\,\hat{r}. \tag{16.8}\]
Here \(r\) is the distance from the element \(dq\) to the point \(P\) where the field is wanted, and \(\hat{r}\) points from \(dq\) toward \(P\). The charge element is written with a charge density: \(dq = \lambda\,d\ell\) along a line, \(\sigma\,dA\) over a surface, or \(\rho\,dV\) through a volume. The five-step procedure of Section 15.4 carries over unchanged: pick a typical element, express \(dq\), \(r\), and the direction of \(d\vec{E}\) in terms of one coordinate, let symmetry cancel what it can, integrate the rest, and check the limits.
The next five subsections apply equation (16.8) to a line, a ring, a disk, a plane, and a sphere. Each shape is built on the ones before it, and every result must reduce to the field of a point charge when we are far away, a check we will make each time.
The Electric Field of a Line Charge
A thin rod of length \(L\) carries a charge \(Q\) spread uniformly, so its linear charge density is \(\lambda = Q/L\). We want the field at a point \(P\) a distance \(y\) from the rod, on its perpendicular bisector (Figure 16.6).
Put the rod on the \(x\)-axis from \(x = -L/2\) to \(x = +L/2\), with \(P\) on the \(y\)-axis. An element of length \(dx\) at position \(x\) carries charge \(dq = \lambda\,dx\) and is a distance \(r = \sqrt{x^2 + y^2}\) from \(P\). Its field \(d\vec{E}\) points along the line from the element to \(P\), and has components
\[dE_x = -dE\,\frac{x}{r}, \qquad dE_y = dE\,\frac{y}{r}, \qquad\text{where } dE = k_e\frac{\lambda\,dx}{r^2}.\]
Now symmetry. The element at \(-x\) is the mirror image of the one at \(+x\). Its \(y\)-component is the same, but its \(x\)-component is opposite. Adding the whole rod, the \(x\)-components cancel in pairs and \(E_x = 0\). Only the \(y\)-components survive:
\[E_y = \int dE_y = k_e\lambda y\int_{-L/2}^{L/2}\frac{dx}{\left(x^2 + y^2\right)^{3/2}}.\]
The integral is a standard one (differentiate the result to check it):
\[\int\frac{dx}{\left(x^2 + y^2\right)^{3/2}} = \frac{x}{y^2\sqrt{x^2 + y^2}}.\]
Evaluating between the limits and multiplying by \(k_e\lambda y\),
\[E = \frac{k_e\lambda L}{y\sqrt{y^2 + L^2/4}} = \frac{k_e Q}{y\sqrt{y^2 + L^2/4}}, \tag{16.9}\]
directed perpendicular to the rod, away from it for positive \(Q\).
Checks. Far from the rod, \(y \gg L\), the square root becomes \(y\) and \(E \to k_e Q/y^2\): from a distance, the rod looks like a point charge. The opposite limit is more interesting. Close to a long rod, \(y \ll L\), the square root becomes \(L/2\) and
\[E \approx \frac{k_e\lambda L}{y\,(L/2)} = \frac{2k_e\lambda}{y}.\]
This is the field of an infinite line of charge, and it is worth writing in terms of \(\epsilon_0\):
Key Equation: Field of an infinite line of charge
\[E = \frac{2k_e\lambda}{r} = \frac{\lambda}{2\pi\epsilon_0 r}. \tag{16.10}\]
(We have written \(r\) for the perpendicular distance from the line.) The field of a line falls off as \(1/r\), more slowly than a point charge’s \(1/r^2\). By symmetry it points radially away from the line, so its field lines spread out in two dimensions rather than three: through a cylinder of radius \(r\) and area \(2\pi r L\) around the line, not a sphere. Chapter 17 will derive equation (16.10) in two lines from exactly that observation.
Example 16.5: How long is “infinite”?
A rod \(0.200\,\mathrm{m}\) long carries \(+5.00\,\mathrm{nC}\) spread uniformly. Find the electric field at a point \(5.00\,\mathrm{cm}\) from the rod’s center, on its perpendicular bisector, and compare it with the infinite-line and point-charge approximations.
Solution
From equation (16.9), with \(y = 0.0500\,\mathrm{m}\) and \(L/2 = 0.100\,\mathrm{m}\),
\[E = \frac{(8.99\times10^{9})(5.00\times10^{-9})}{(0.0500)\sqrt{(0.0500)^2 + (0.100)^2}} = \frac{44.95}{(0.0500)(0.1118)} = \boxed{8.04\times 10^{3}\,\mathrm{N/C}},\]
directed away from the rod. The linear charge density is \(\lambda = 2.50\times 10^{-8}\,\mathrm{C/m}\), so the infinite-line formula gives \(2k_e\lambda/y = 8.99\times 10^{3}\,\mathrm{N/C}\), about \(12\%\) too high. Treating the rod as a point charge gives \(k_e Q/y^2 = 1.80\times 10^{4}\,\mathrm{N/C}\), more than twice too high. At a distance of half the rod’s half-length, the rod is already much better described as infinite than as a point. As a rule of thumb, the infinite-line formula is good whenever you are much closer to the line than to either of its ends.
The Electric Field of a Charged Ring
A thin ring of radius \(a\) carries a charge \(Q\) spread uniformly around it. We want the field at a point on its axis, a distance \(x\) from its center. Chapter 15 has already done the work. Example 15.8 found the force on a point charge \(q\) at exactly this point, using the symmetry of the ring to cancel every component perpendicular to the axis. Dividing equation (15.8) by \(q\) gives the field:
Key Equation: Field on the axis of a charged ring
\[E = \frac{k_e Q\,x}{\left(x^2 + a^2\right)^{3/2}}, \tag{16.11}\]
directed along the axis, away from the ring if \(Q\) is positive. Besides being useful in its own right, the ring is a building block: a disk is nothing but a set of concentric rings, and Section 16.3 uses equation (16.11) that way. Its shape shows several features that will recur. Figure 16.7 plots it, in units of \(k_eQ/a^2\), against the distance \(x/a\) along the axis.
Three features stand out. At the center of the ring the field is zero, because the contributions from opposite sides cancel exactly. Far away, the field approaches that of a point charge. And in between there is a maximum. The field grows at first because moving away from the center stops the cancellation, and it eventually shrinks because everything is getting farther away.
Example 16.6: Where is a ring’s field strongest?
Show that the field on the axis of a uniform ring of radius \(a\) is greatest at \(x = a/\sqrt{2}\), and find the maximum field.
Solution
Differentiate equation (16.11) with respect to \(x\) using the product rule, and set the result to zero:
\[\frac{dE}{dx} = k_eQ\left[\frac{1}{(x^2+a^2)^{3/2}} - \frac{3x^2}{(x^2+a^2)^{5/2}}\right] = k_eQ\,\frac{a^2 - 2x^2}{(x^2+a^2)^{5/2}} = 0.\]
The numerator vanishes when \(x^2 = a^2/2\), that is, at \(x = \boxed{a/\sqrt{2}}\). Substituting back, with \(x^2 + a^2 = 3a^2/2\),
\[E_{\max} = \frac{k_eQ\,(a/\sqrt{2})}{(3a^2/2)^{3/2}} = \frac{2}{3\sqrt{3}}\,\frac{k_eQ}{a^2} \approx \boxed{0.385\,\frac{k_eQ}{a^2}}.\]
Note: Off the axis
Every result in this section is for points on an axis of symmetry, and that is no accident. Off the axis, the contributions from different parts of the ring no longer cancel so neatly, and the integrals cannot be done in terms of elementary functions. Physicists and engineers find such fields numerically. The field-line pictures in this chapter were produced exactly that way, by adding the fields of point charges at many points and tracing the direction of the result.
Checkpoint 16.4
Near the center of a positively charged ring, the field on the axis points away from the center on both sides. (a) A small positive charge is released on the axis very close to the center. What happens to it? (b) What happens to a small negative charge released at the same point? (Chapter 15, Problem 15.25, followed this case to the end.)
The Electric Field of a Charged Disk
A thin disk of radius \(R\) carries charge spread uniformly over one face with surface charge density \(\sigma\). We want the field at a point \(P\) on the disk’s axis, a distance \(x\) from its center.
Rather than integrating over tiny patches of area, which would need a double integral, we can use the ring result. Divide the disk into thin concentric rings (Figure 16.8). The ring of radius \(r\) and width \(dr\) has area \(dA = 2\pi r\,dr\) and so carries charge
\[dq = \sigma\,dA = 2\pi\sigma r\,dr.\]
By equation (16.11), with \(a\) replaced by \(r\) and \(Q\) by \(dq\), this ring produces a field along the axis of
\[dE = \frac{k_e x\,dq}{\left(x^2 + r^2\right)^{3/2}} = \frac{2\pi k_e\sigma x\,r\,dr}{\left(x^2 + r^2\right)^{3/2}}.\]
Every ring’s field points along the axis, so the contributions simply add. Integrating from the center of the disk (\(r = 0\)) to its edge (\(r = R\)), with the substitution \(u = x^2 + r^2\), \(du = 2r\,dr\),
\[E = \pi k_e\sigma x\int_{x^2}^{x^2 + R^2} u^{-3/2}\,du = \pi k_e\sigma x\left[-\frac{2}{\sqrt{u}}\right]_{x^2}^{x^2 + R^2} = 2\pi k_e\sigma x\left(\frac{1}{x} - \frac{1}{\sqrt{x^2 + R^2}}\right).\]
Using \(2\pi k_e = 1/(2\epsilon_0)\), the field on the axis of a uniformly charged disk is
Key Equation: Field on the axis of a charged disk
\[E = \frac{\sigma}{2\epsilon_0}\left(1 - \frac{x}{\sqrt{x^2 + R^2}}\right), \tag{16.12}\]
directed along the axis, away from the disk for positive \(\sigma\).
Checks. Far away, \(x \gg R\), we need the small difference between \(1\) and \(x/\sqrt{x^2 + R^2} = (1 + R^2/x^2)^{-1/2} \approx 1 - R^2/2x^2\). Then
\[E \approx \frac{\sigma}{2\epsilon_0}\cdot\frac{R^2}{2x^2} = \frac{1}{4\pi\epsilon_0}\,\frac{\sigma\pi R^2}{x^2} = \frac{k_e Q}{x^2},\]
since \(\sigma\pi R^2\) is the disk’s total charge \(Q\). Once again, from far away the disk is a point charge. The near limit, \(x \ll R\), leads to the infinite plane of Section 16.3.
Example 16.7: Field near a charged disk
A plastic disk of radius \(10.0\,\mathrm{cm}\) carries a uniform surface charge density of \(5.0\,\mathrm{\mu C/m^2}\) on one face. Find the field on its axis (a) \(2.0\,\mathrm{cm}\) and (b) \(50\,\mathrm{cm}\) from its center.
Solution
The prefactor is
\[\frac{\sigma}{2\epsilon_0} = \frac{5.0\times10^{-6}}{2(8.85\times10^{-12})} = 2.82\times 10^{5}\,\mathrm{N/C}.\]
(a) At \(x = 0.020\,\mathrm{m}\), \(x/\sqrt{x^2 + R^2} = 0.020/0.102 = 0.196\), so
\[E = (2.82\times10^{5})(1 - 0.196) = \boxed{2.3\times 10^{5}\,\mathrm{N/C}}.\]
(b) At \(x = 0.50\,\mathrm{m}\), \(x/\sqrt{x^2 + R^2} = 0.50/0.5099 = 0.9806\), and
\[E = (2.82\times10^{5})(1 - 0.9806) \approx \boxed{5.5\times 10^{3}\,\mathrm{N/C}}.\]
Here the answer is the small difference of two nearly equal numbers, so it pays to carry extra digits: rounding \(0.9806\) to \(0.98\) would have made the answer \(3\%\) too large. For comparison, the point-charge formula, with \(Q = \sigma\pi R^2 = 1.57\times 10^{-7}\,\mathrm{C}\), gives \(k_eQ/x^2 = 5.65\times 10^{3}\,\mathrm{N/C}\), already only about \(3\%\) high. Close to the disk, in part (a), the field is \(80\%\) of \(\sigma/2\epsilon_0\), the value it approaches right at the surface.
The Electric Field of a Charged Plane
An infinite plane of charge, a flat sheet with uniform surface charge density \(\sigma\) extending forever in every direction, can be handled in two ways. Doing it both ways shows how much a little thought about how to slice up a distribution can simplify the integral.
The direct route: a double integral. Put the plane in the \(xy\)-plane and find the field at a point \(P\) on the \(z\)-axis, a distance \(z\) above the plane (Figure 16.9). Slice the plane into small rectangles. The patch of sides \(dx\) and \(dy\) at the point \((x, y)\) has area \(dA = dx\,dy\), carries charge \(dq = \sigma\,dx\,dy\), and is a distance
\[r = \sqrt{x^2 + y^2 + z^2}\]
from \(P\). Its field \(d\vec{E}\) points along the line from the patch to \(P\). Now use symmetry. For every patch at \((x, y)\) there is a matching patch at \((-x, -y)\), the same distance from \(P\), whose field has the same \(z\)-component but opposite components parallel to the plane. Those parallel components cancel in pairs, and only the \(z\)-components survive. The line from the patch makes an angle \(\theta\) with the \(z\)-axis, where \(\cos\theta = z/r\), so
\[E = \int dE\cos\theta = \int k_e\frac{\sigma\,dx\,dy}{r^2}\cdot\frac{z}{r} = k_e\sigma z\int_{-\infty}^{\infty}\!\int_{-\infty}^{\infty}\frac{dy\,dx}{\left(x^2 + y^2 + z^2\right)^{3/2}}.\]
Do the inner integral over \(y\) first, holding \(x\) fixed. It sums the patches along one strip of the plane, parallel to the \(y\)-axis. With the abbreviation \(b^2 = x^2 + z^2\), which is constant along the strip, a table of integrals (or differentiating the answer to check it) gives
\[\int_{-\infty}^{\infty}\frac{dy}{\left(y^2 + b^2\right)^{3/2}} = \left[\frac{y}{b^2\sqrt{y^2 + b^2}}\right]_{-\infty}^{\infty} = \frac{1}{b^2} - \left(-\frac{1}{b^2}\right) = \frac{2}{b^2} = \frac{2}{x^2 + z^2}.\]
That leaves an integral over \(x\), which adds up the strips:
\[E = 2k_e\sigma z\int_{-\infty}^{\infty}\frac{dx}{x^2 + z^2} = 2k_e\sigma z\left[\frac{1}{z}\arctan\frac{x}{z}\right]_{-\infty}^{\infty} = 2k_e\sigma z\cdot\frac{1}{z}\left(\frac{\pi}{2} + \frac{\pi}{2}\right) = 2\pi k_e\sigma.\]
With \(2\pi k_e = 1/(2\epsilon_0)\), this is \(E = \sigma/2\epsilon_0\). The distance \(z\) has canceled completely.
The shortcut: let the disk grow. We already have the field of a disk. Let the disk of equation (16.12) grow without limit, \(R \to \infty\). The fraction \(x/\sqrt{x^2 + R^2}\) goes to zero, and what remains is \(\sigma/2\epsilon_0\) again, in a single line.
Compare the two routes. The rectangular grid ignores the plane’s symmetry about the axis through \(P\), so we needed two integrals, plus a symmetry argument to throw away the parallel components. It worked here only because the limits are infinite: for a finite disk the inner limits would become \(\pm\sqrt{R^2 - x^2}\) and the integral would turn ugly. The rings of Section 16.3 match the symmetry. Every patch of a ring is the same distance from \(P\), so the cancellation of the parallel components is already built in, and a single integral did the job. When a distribution has a symmetry, slice it into pieces that share that symmetry. Either way, and whatever we call the distance from the plane, the field of an infinite plane of charge is
Key Equation: Field of an infinite plane of charge
\[E = \frac{\sigma}{2\epsilon_0}. \tag{16.13}\]
The field is perpendicular to the plane, pointing away from it on both sides if \(\sigma\) is positive and toward it if \(\sigma\) is negative. The most striking thing about equation (16.13) is what it does not contain: the distance \(x\). The field of an infinite plane is the same at every distance from it. Its field lines are parallel, evenly spaced straight lines that never spread out (Figure 16.11a), and a field that has the same magnitude and direction everywhere in a region is called a uniform electric field.
How can the field fail to weaken with distance? Figure 16.10 follows one patch of charge as the field point moves away from the plane. Two things change. The patch is farther away, so its field \(dE\) is weaker. But the line from the patch now meets the axis at a smaller angle \(\theta\), so a larger share of \(dE\), the fraction \(\cos\theta\), points along the axis and survives the cancellation. For patches near the foot of the perpendicular, \(\theta\) is already small, and the first effect wins: their contribution shrinks. For patches far out across the plane, the second effect wins, and their contribution actually grows as you move away. For an infinite plane the gains and losses balance exactly.
No real sheet of charge is infinite, of course. Equation (16.13) is a good approximation for a finite sheet at points much closer to it than to its edges, \(x \ll R\), as part (a) of the disk example showed.
Two parallel planes. The most useful arrangement is a pair of large parallel plates carrying equal and opposite charge densities, \(+\sigma\) and \(-\sigma\) (Figure 16.11b). Each plate alone produces a field of magnitude \(\sigma/2\epsilon_0\). Between the plates, the positive plate’s field points away from it and the negative plate’s field points toward it, so both point from the positive plate to the negative one and they add. Outside the plates, on either side, the two fields point in opposite directions and cancel. Therefore
Key Equation: Field between oppositely charged parallel plates
\[E = \frac{\sigma}{\epsilon_0} \quad\text{between the plates}, \qquad E = 0 \quad\text{outside}. \tag{16.14}\]
The field between the plates is uniform and points from the positive plate to the negative plate. This arrangement is the standard way to produce a uniform field in the laboratory, and it is the heart of the capacitor (Chapter 19). Near the edges of real plates the field lines bulge outward, an effect called fringing, but for plates much larger than their separation it is small.
Example 16.8: A pair of charged plates
Two parallel square metal plates, each \(10.0\,\mathrm{cm}\) on a side, face each other a few millimeters apart. One carries \(+5.0\,\mathrm{nC}\) and the other \(-5.0\,\mathrm{nC}\), spread uniformly over their facing surfaces. Find the field between the plates.
Solution
The charge density on each plate has magnitude
\[\sigma = \frac{Q}{A} = \frac{5.0\times10^{-9}\,\mathrm{C}}{(0.100\,\mathrm{m})^2} = 5.0\times 10^{-7}\,\mathrm{C/m^2}.\]
Since the plates are much larger than their separation, equation (16.14) applies:
\[E = \frac{\sigma}{\epsilon_0} = \frac{5.0\times10^{-7}}{8.85\times10^{-12}} = \boxed{5.6\times 10^{4}\,\mathrm{N/C}},\]
directed from the positive plate toward the negative plate, and the same everywhere between them. The separation does not enter, as long as it stays small compared with the size of the plates.
The Electric Field of a Charged Sphere
The last shape is the sphere. Because Coulomb’s law has exactly the same inverse-square form as Newton’s law of gravitation, the two shell theorems of Chapter 13 carry over to charge unchanged, with \(k_e q\) in place of \(Gm\):
- A uniform spherical shell of charge produces, at every point outside it, the same field as a point charge at its center carrying the shell’s total charge.
- A uniform spherical shell of charge produces zero field everywhere inside it.
Newton proved these by an integration much like the ones in this chapter. Chapter 17 will prove them again in a few lines using Gauss’s law. Here we use them to find the field of two important spheres.
A spherical shell, or a charged conducting sphere. If a charge \(Q\) is spread uniformly over a thin spherical shell of radius \(R\), the shell theorems give the field at once:
\[E = \frac{k_e Q}{r^2} \quad (r > R), \qquad E = 0 \quad (r < R).\]
The same is true for a charged solid conducting sphere, because on a conductor the charge moves to the outer surface, as we will show in Chapter 17.
A uniformly charged solid sphere. Now suppose a charge \(Q\) is spread uniformly through the volume of a sphere of radius \(R\), an insulating ball, say, with volume charge density \(\rho = Q/(\tfrac43\pi R^3)\). Outside the sphere, think of it as a set of nested shells. Each shell acts as a point charge at the center, so the whole sphere does too, and \(E = k_eQ/r^2\).
Inside the sphere, at a distance \(r < R\) from the center, divide the sphere into the part inside radius \(r\) and the shells outside it. The outer shells all enclose the point, so by the second shell theorem they contribute nothing. The inner part is a smaller uniform sphere, which acts as a point charge at the center carrying the charge it contains:
\[Q_{\text{in}} = \rho\cdot\tfrac43\pi r^3 = Q\,\frac{r^3}{R^3}.\]
The field at \(r\) is therefore \(E = k_e Q_{\text{in}}/r^2 = k_e Q r/R^3\). Putting both regions together:
Key Equation: Field of a uniformly charged solid sphere
\[E = \frac{k_e Q}{R^3}\,r \quad (r \le R), \qquad E = \frac{k_e Q}{r^2} \quad (r \ge R). \tag{16.15}\]
Inside, the field grows linearly from zero at the center. Outside, it falls off as \(1/r^2\). The two expressions agree at the surface, where both give \(k_eQ/R^2\), the largest field anywhere (Figure 16.12). The field is radial everywhere, outward for positive \(Q\).
Example 16.9: Inside and outside a charged ball
An insulating ball of radius \(5.0\,\mathrm{cm}\) carries \(+20\,\mathrm{nC}\) spread uniformly through its volume. Find the field (a) at its center, (b) \(2.5\,\mathrm{cm}\) from its center, (c) at its surface, and (d) \(10\,\mathrm{cm}\) from its center.
Solution
(a) At the center, \(r = 0\) and \(\boxed{E = 0}\). Charge surrounds the center symmetrically, so every push is balanced.
(b) Inside, at \(r = 0.025\,\mathrm{m}\), equation (16.15) gives
\[E = \frac{k_eQ\,r}{R^3} = \frac{(8.99\times10^{9})(20\times10^{-9})(0.025)}{(0.050)^3} = \boxed{3.6\times 10^{4}\,\mathrm{N/C}}.\]
(c) At the surface,
\[E = \frac{k_eQ}{R^2} = \frac{(8.99\times10^{9})(20\times10^{-9})}{(0.050)^2} = \boxed{7.2\times 10^{4}\,\mathrm{N/C}}.\]
(d) Outside, at \(r = 0.10\,\mathrm{m}\),
\[E = \frac{k_eQ}{r^2} = \frac{(8.99\times10^{9})(20\times10^{-9})}{(0.10)^2} = \boxed{1.8\times 10^{4}\,\mathrm{N/C}}.\]
Halfway to the surface from the center the field is half its surface value, and twice the radius away it is a quarter of it: linear inside, inverse-square outside. All four fields point radially outward.
Checkpoint 16.5
Rank the magnitudes of the fields at these four points, from largest to smallest: (a) \(1\,\mathrm{cm}\) from an infinite plane with \(\sigma = 1\,\mathrm{\mu C/m^2}\); (b) \(1\,\mathrm{m}\) from the same plane; (c) midway between two large plates carrying \(\pm1\,\mathrm{\mu C/m^2}\); (d) \(1\,\mathrm{cm}\) outside those two plates. Explain each answer without calculating.
Answers to Checkpoints
Checkpoint 16.4. (a) The field points away from the center on both sides, so a positive charge placed just off center is pushed farther from the center; it accelerates away along the axis. The center is an unstable equilibrium for it. (b) A negative charge feels a force opposite to the field, back toward the center. It is pulled through the center, overshoots, is pulled back, and oscillates about the center along the axis; for small displacements the motion is simple harmonic.
Checkpoint 16.5. From largest to smallest: (c), then (a) and (b) tied, then (d). The field of an infinite plane, \(\sigma/2\epsilon_0\), does not depend on distance, so (a) and (b) are equal. Between two oppositely charged plates the two plates’ fields point the same way and add, giving \(\sigma/\epsilon_0\): twice (a). Outside the pair the two fields point in opposite directions and cancel, so (d) is essentially zero.
This page titled 16.3: The Electric Field of Continuous Charge Distributions was last modified on Thu, 12 Nov 2026 04:26:57 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Michael Ragsdale.
The book could not be loaded just now.