33.E: Interference (Problems)

Physics: A Foundation for Scientists and Engineers · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    33.E: Interference (Problems)

    Difficulty key: ★ introductory, ★★ standard, ★★★ challenging. Take the speed of light as \(c = 3.00\times10^8\,\mathrm{m/s}\) and, where needed, treat angles as small (\(\sin\theta \approx \tan\theta = y/L\)).

    Section 33.1 — Young’s Double-Slit Experiment

    33.1 ★★ [Conceptual.] Two flashlights shine on the same spot on a wall, yet no interference fringes appear. Two slits lit by one laser do show fringes. Explain the difference in terms of coherence.

    33.2 ★ Light of wavelength \(550\,\mathrm{nm}\) falls on two slits \(0.10\,\mathrm{mm}\) apart. At what angle does the first-order (\(m=1\)) bright fringe appear?

    33.3 ★★ A double slit with \(d = 0.040\,\mathrm{mm}\) is lit by \(633\,\mathrm{nm}\) laser light, with the screen \(2.0\,\mathrm{m}\) away. Find the spacing between adjacent bright fringes.

    33.4 ★★ In a double-slit experiment the third-order bright fringe is found \(2.7\,\mathrm{cm}\) from the center on a screen \(1.8\,\mathrm{m}\) away, with slits \(0.15\,\mathrm{mm}\) apart. Find the wavelength.

    33.5 ★★★ [Real-world application: metrology.] A double slit is illuminated simultaneously by \(480\,\mathrm{nm}\) and \(600\,\mathrm{nm}\) light (\(d = 0.030\,\mathrm{mm}\), \(L = 1.2\,\mathrm{m}\)). (a) Find the fringe spacing for each color. (b) At what distance from center do a bright fringe of one color and a bright fringe of the other first coincide?

    33.6 ★★ In a double-slit experiment, slits \(0.20\,\mathrm{mm}\) apart are lit by \(550\,\mathrm{nm}\) light, with the screen \(1.8\,\mathrm{m}\) away. (a) Find the spacing between adjacent bright fringes. (b) How far from the center is the third bright fringe?

    33.7 ★★ Two slits \(0.15\,\mathrm{mm}\) apart produce a pattern on a screen \(2.0\,\mathrm{m}\) away. The fourth bright fringe lies \(2.9\,\mathrm{cm}\) from the central maximum. Find the wavelength of the light.

    Section 33.2 — Interference and Double-Slit Intensity

    33.8 ★★ At a certain point in a double-slit pattern the phase difference between the two waves is \(\phi = \pi/3\). What fraction of the maximum intensity appears there?

    33.9 ★★ Two slits \(0.20\,\mathrm{mm}\) apart are lit by \(589\,\mathrm{nm}\) light on a screen \(1.0\,\mathrm{m}\) away. Find the intensity (as a fraction of maximum) at a point \(1.5\,\mathrm{mm}\) from the central maximum.

    33.10 ★★★ [Conceptual.] The idealized double-slit pattern has every maximum the same height, \(4I_0\). Explain why a single slit gives intensity \(I_0\) but two coherent slits give \(4I_0\), not \(2I_0\), at the center, and reconcile this with conservation of energy.

    33.11 ★★ In a two-slit interference pattern the central intensity is \(I_{\max}\). At a point where the path difference between the two waves is \(\lambda/4\), what fraction of \(I_{\max}\) is the intensity?

    Section 33.3 — Interference from Thin Films

    33.12 ★ Light reflects from the top of a water film (\(n = 1.33\)) sitting on glass. At the air-water surface, does the reflected wave undergo a \(180^{\circ}\) phase flip? Explain.

    33.13 ★★ A soap film (\(n = 1.33\)) in air appears brightest in reflection at \(\lambda = 540\,\mathrm{nm}\). Find the minimum nonzero film thickness.

    33.14 ★★★ [Real-world application: optics.] A camera lens (\(n = 1.52\)) is coated with magnesium fluoride (\(n = 1.38\)) to reduce reflection at \(\lambda = 550\,\mathrm{nm}\). (a) How many reflection phase flips occur? (b) Find the minimum coating thickness for least reflection, and state whether the condition is the same as or opposite to a soap film’s.

    33.15 ★★ A soap film (\(n = 1.33\)) surrounded by air looks bright green (\(\lambda = 510\,\mathrm{nm}\)) in reflected light. Find the two smallest film thicknesses that give this constructive reflection. (One phase reversal occurs, at the front surface.)

    Section 33.4 — Interferometry & the Double-Slit Puzzle

    33.16 ★★ A Michelson interferometer uses \(589\,\mathrm{nm}\) light. The movable mirror is shifted until \(250\) fringes pass. How far did it move?

    33.17 ★★★ [Real-world application: precision measurement.] A Michelson interferometer’s movable mirror is advanced \(0.233\,\mathrm{mm}\), and \(750\) fringes are counted. Find the wavelength of the light used.

    33.18 ★★★ [Conceptual — the double-slit puzzle.] Return to the chapter opener. Young’s experiment shows light behaving as a wave; the same fringes appear when the experiment is run with single electrons sent through one at a time.

    1. If electrons are sent one at a time, each makes a single dot on the screen, yet over many electrons an interference pattern builds up. What does this imply about a single electron’s passage through the slits?
    2. If a detector is placed at the slits to record which slit each electron goes through, the fringes vanish and two simple bands appear. In one or two sentences, state what this says about the role of measurement, connecting it to the opening question about quantum mechanics.

    Challenge Problems

    33.19 ★★★ [Real-world application: metrology — the optical wedge.] Two flat glass plates \(12.0\,\mathrm{cm}\) long are laid one on the other and touch along one edge. A thin wire laid across the far edge props them apart, leaving a wedge of air between them. Viewed from above in reflected \(589\,\mathrm{nm}\) light, the wedge shows a series of straight, evenly spaced dark fringes. Recall that of the two reflections, from the bottom of the upper plate and from the top of the lower plate, only one suffers a \(180^{\circ}\) phase flip.

    1. Explain why the line of contact is dark, not bright, and show that dark fringes occur where the air gap has thickness \(t = m\lambda/2\).
    2. If the gap grows linearly from \(0\) at the contact line to \(D\) at the wire, show that the number of dark fringes across the full length is \(N = 2D/\lambda\), and that the fringe spacing is \(\Delta x = \lambda \ell /(2D)\).
    3. An observer counts \(85\) dark fringes across the \(12.0\,\mathrm{cm}\). Find the wire’s diameter and the fringe spacing.
    4. The wedge is now filled with water (\(n = 1.33\)) instead of air. How many fringes appear, and does the technique become more or less sensitive? Explain why this method can measure a thickness far smaller than the wavelength of the light used.

    33.20 ★★★ [Real-world application: radio astronomy — the sea-cliff interferometer.] A radio telescope sits on a cliff of height \(h\) above a calm sea, watching a radio source rise above the horizon at angle \(\theta\). The antenna receives two waves: one direct from the source, and one reflected from the sea surface. The reflection off the conducting seawater introduces a \(180^{\circ}\) phase flip. (This arrangement, used in Australia in the 1940s, gave the resolution of a two-dish interferometer with only one dish.)

    1. Treating the reflected wave as coming from an image source a distance \(h\) below the sea surface, show that the path difference between the two waves is \(\delta = 2h\sin\theta\).
    2. Including the phase flip, show that maxima occur where \(2h\sin\theta = \left(m + \tfrac12\right)\lambda\) and minima where \(2h\sin\theta = m\lambda\).
    3. For \(h = 25\,\mathrm{m}\) and \(\lambda = 1.5\,\mathrm{m}\), find the angle of the first maximum above the horizon, and the angular spacing between successive maxima at small \(\theta\).
    4. The effective baseline of this instrument is \(2h\), not \(h\). Explain why, and find the angular resolution \(\lambda/2h\) in degrees. What practical limitation would you expect on a day when the sea is rough?

    33.21 ★★★ [Real-world application: precision measurement — measuring the refractive index of air.] One arm of a Michelson interferometer contains an evacuated glass cell of length \(L = 5.00\,\mathrm{cm}\) with thin, flat windows. The interferometer is illuminated with \(633\,\mathrm{nm}\) helium–neon laser light. Air is slowly admitted to the cell, and the fringes are counted as they sweep past.

    1. The light crosses the cell twice. Show that filling the cell with a gas of index \(n\) shifts the fringe count by \(N = 2L(n-1)/\lambda\).
    2. \(46\) fringes are counted between full vacuum and atmospheric pressure. Find \(n\) for air, to six decimal places.
    3. For a dilute gas, \(n - 1\) is proportional to pressure. If the observer can reliably detect a shift of a quarter of a fringe, what is the smallest pressure change (as a fraction of atmospheric, and in pascals) that this apparatus can sense?
    4. Suggest one change to the apparatus that would improve the sensitivity of part (c) by a factor of ten, and state the practical cost of making it.

    This page titled 33.E: Interference (Problems) was last modified on Thu, 12 Nov 2026 04:27:09 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Michael Ragsdale.