43.4: Nuclear Reactions

Physics: A Foundation for Scientists and Engineers · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    43.4: Nuclear Reactions

    When a nucleus is struck by a particle and transforms into different nuclei, we have a nuclear reaction. A general reaction in which a projectile \(a\) strikes a target \(X\), producing \(b\) and \(Y\), is written \(a + X \rightarrow b + Y\). Two quantities are always conserved: the total number of nucleons (the sum of the mass numbers \(A\)) and the total charge (the sum of the atomic numbers \(Z\)). Balancing these is how we identify an unknown product.

    The energy released or absorbed is the reaction energy or \(Q\) value, given by the change in rest mass:

    Key Equation: Reaction energy (\(Q\) value)

    \[Q = (M_a + M_X - M_b - M_Y)\,c^2. \tag{43.13}\]

    If \(Q > 0\), mass is converted to kinetic energy and the reaction is exothermic (energy is released). If \(Q < 0\), the reaction is endothermic and cannot proceed unless the projectile brings in at least that much kinetic energy; the minimum required is the threshold energy. The decays we study next (alpha and beta decay) are simply spontaneous reactions with a single parent on the left, and their \(Q\) value is found the same way.

    Example 43.5: Identifying a reaction product and its energy

    Find the unknown product \(X\) and the reaction energy of

    \[{}^{1}_{1}\mathrm{H} + {}^{19}_{9}\mathrm{F} \rightarrow {}^{16}_{8}\mathrm{O} + X.\]

    Use atomic masses \(m(^{1}\mathrm{H}) = 1.007825\,\mathrm{u}\), \(m(^{19}\mathrm{F}) = 18.998403\,\mathrm{u}\), \(m(^{16}\mathrm{O}) = 15.994915\,\mathrm{u}\), and \(m(^{4}\mathrm{He}) = 4.002603\,\mathrm{u}\).

    Solution

    Conserve nucleons and charge. For mass number: \(1 + 19 = 16 + A_X\), so \(A_X = 4\). For charge: \(1 + 9 = 8 + Z_X\), so \(Z_X = 2\). The product is \(^{4}_{2}\mathrm{He}\), an alpha particle:

    \[{}^{1}_{1}\mathrm{H} + {}^{19}_{9}\mathrm{F} \rightarrow {}^{16}_{8}\mathrm{O} + {}^{4}_{2}\mathrm{He}.\]

    The reaction energy is

    \[Q = \big[(1.007825 + 18.998403) - (15.994915 + 4.002603)\big](931.494)\,\mathrm{MeV}\]

    \[= (0.008710)(931.494) = \boxed{+8.11\,\mathrm{MeV}}.\]

    Since \(Q > 0\), the reaction is exothermic: it releases \(8.11\,\mathrm{MeV}\).

    Alpha Decay

    In alpha decay, a heavy nucleus ejects an alpha particle: a tightly bound clump of two protons and two neutrons, identical to a \(^{4}_{2}\mathrm{He}\) nucleus, with mass about \(4\,\mathrm{u}\) and charge \(+2e\). The original nucleus (the parent) thereby loses two protons and two neutrons, becoming a lighter daughter nucleus:

    Key Equation: Alpha decay

    \[{}^{A}_{Z}\mathrm{X} \;\rightarrow\; {}^{A-4}_{Z-2}\mathrm{Y} + {}^{4}_{2}\mathrm{He}. \tag{43.14}\]

    For example, the americium in household smoke detectors decays this way:

    \[{}^{241}_{95}\mathrm{Am} \rightarrow {}^{237}_{93}\mathrm{Np} + {}^{4}_{2}\mathrm{He}.\]

    About \(99\%\) of the helium on Earth comes from the alpha decay of underground uranium and thorium. Because alpha particles are heavy and doubly charged, they interact strongly with matter and lose their energy almost at once: a few centimeters of air, a sheet of paper, or even the dead outer layer of your skin will stop them. They are therefore relatively harmless externally, but dangerous if an alpha emitter is inhaled or ingested, where it can deposit all its energy directly into living tissue.

    Example 43.6: The energy of an alpha decay

    A \(^{226}_{88}\mathrm{Ra}\) nucleus undergoes alpha decay to \(^{222}_{86}\mathrm{Rn}\). (a) Find the \(Q\) value, using masses \(226.025410\,\mathrm{u}\) for \(^{226}\mathrm{Ra}\), \(222.017578\,\mathrm{u}\) for \(^{222}\mathrm{Rn}\), and \(4.002603\,\mathrm{u}\) for \(^{4}\mathrm{He}\). (b) What is the kinetic energy of the emitted alpha particle?

    Solution

    (a) The decay is \({}^{226}_{88}\mathrm{Ra} \rightarrow {}^{222}_{86}\mathrm{Rn} + {}^{4}_{2}\mathrm{He}\), so

    \[Q = (226.025410 - 222.017578 - 4.002603)(931.494)\,\mathrm{MeV}\]

    \[= (0.005229)(931.494) = \boxed{4.87\,\mathrm{MeV}}.\]

    (b) The released energy is shared between the alpha particle and the recoiling daughter, which must carry equal and opposite momentum. Because the alpha is far lighter, it takes almost all the energy; momentum conservation gives

    \[K_\alpha = Q\,\frac{M_{\mathrm{Rn}}}{M_{\mathrm{Rn}} + M_\alpha} \approx Q\,\frac{222}{226} = (4.87)(0.982) = \boxed{4.78\,\mathrm{MeV}}.\]

    The daughter nucleus recoils with the small remaining \(0.09\,\mathrm{MeV}\).

    Beta Decay

    A chart of proton number Z against neutron number N.
    Figure 43.3. The valley of stability. Stable nuclei (blue band) cluster near \(N = Z\) for light elements but bend toward neutron excess (\(N > Z\)) for heavy ones. Neutron-rich nuclei below the band decay by \(\beta^-\) (each step: \(N - 1\), \(Z + 1\)) and proton-rich nuclei above it decay by \(\beta^+\) (\(N + 1\), \(Z - 1\)), each step nudging the nucleus toward the stable band; the heaviest nuclei decay by alpha emission (\(N - 2\), \(Z - 2\)).
    Figure descriptionA chart of proton number Z against neutron number N. A dashed diagonal marks the line N equals Z. A thick blue band, the stable nuclei, follows that diagonal closely for light nuclei but bends progressively below it as the nuclei get heavier, so heavy stable nuclei have more neutrons than protons. The region below and to the right of the band is labeled neutron-rich, decaying by beta-minus as a neutron turns into a proton; the region above and to the left is labeled proton-rich, decaying by beta-plus as a proton turns into a neutron. Each decay moves a nucleus toward the band, shown by short arrows: a red dot below the band takes beta-minus steps diagonally up and to the left, a gold dot above the band takes beta-plus steps diagonally down and to the right, and a green dot beyond the far end of the band, the heaviest nuclei, takes an alpha step down and to the left by two in each direction.

    Beta decay converts a neutron into a proton or vice versa, emitting a fast electron or positron (the beta particle) in the process. There are two types. In \(\beta^-\) decay, a neutron turns into a proton, emitting an electron and an (anti)neutrino:

    \[n \rightarrow p + e^- + \bar{\nu}_e. \tag{43.15}\]

    In \(\beta^+\) decay, a proton turns into a neutron, emitting a positron and a neutrino. (This happens only inside a nucleus, which can supply the energy; a free proton is lighter than a neutron and cannot decay this way.)

    \[p \rightarrow n + e^+ + \nu_e. \tag{43.16}\]

    The nearly massless neutrino (\(\nu_e\)) and antineutrino (\(\bar{\nu}_e\)) are emitted to conserve energy, momentum, and other quantities. In either case the mass number \(A\) is unchanged, while \(Z\) increases by one (\(\beta^-\)) or decreases by one (\(\beta^+\)). Examples include

    \[{}^{14}_{6}\mathrm{C} \rightarrow {}^{14}_{7}\mathrm{N} + e^- + \bar{\nu}_e \quad(\beta^-), \qquad {}^{23}_{12}\mathrm{Mg} \rightarrow {}^{23}_{11}\mathrm{Na} + e^+ + \nu_e \quad(\beta^+).\]

    Whether a nucleus decays by \(\beta^-\), \(\beta^+\), or not at all depends on its balance of neutrons and protons. Plotting the known nuclides on a chart of proton number \(Z\) versus neutron number \(N\), the stable ones form a narrow band called the valley of stability (Figure 43.3). Light stable nuclei lie close to the line \(N = Z\), but heavier ones need ever more neutrons (whose strong-force attraction dilutes the protons’ repulsion) and the band bends toward \(N > Z\). A nucleus lying below the valley has too many neutrons and decays by \(\beta^-\) (converting a neutron to a proton, which moves it one step up and one step left, toward the band); one lying above the valley is proton-rich and decays by \(\beta^+\) (converting a proton to a neutron, one step down and one step right). The heaviest nuclei, beyond the end of the band, tend to shed whole alpha particles, which removes two protons and two neutrons at once.

    Gamma decay. Alpha and beta decay often leave the daughter nucleus in an excited state. Just as an excited atom emits a photon when an electron drops to a lower level, an excited nucleus drops to its ground state by emitting a high-energy photon, a gamma ray (\(\gamma\)), with energy typically from tens of keV to a few MeV. Neither \(Z\) nor \(A\) changes. A few excited nuclei live long enough to be used on their own; technetium-99m (the “m” marks this long-lived, metastable excited state) emits a \(140\,\mathrm{keV}\) gamma ray and is the workhorse of medical imaging.

    The three kinds of radiation differ enormously in how far they travel through matter (Figure 43.4). Alpha particles, heavy and doubly charged, are stopped by a sheet of paper. Beta particles go farther but are stopped by a few millimeters of aluminum. Gamma rays, uncharged and massless, are the most penetrating: even several centimeters of lead only weaken them.

    The penetrating power of alpha, beta and gamma radiation.
    Figure 43.4. Penetrating power. Alpha particles are stopped by a sheet of paper and beta particles by a few millimeters of aluminum, but gamma rays are only weakened, never completely stopped, by several centimeters of lead.
    Figure descriptionThe penetrating power of alpha, beta and gamma radiation. A box at the left labeled radioactive source emits three rays to the right toward three barriers: a thin sheet of paper, a few millimeters of aluminum, and a thick block of lead several centimeters wide. The red alpha arrow, a helium nucleus, stops at the paper. The blue beta arrow, an electron, passes through the paper and stops in the aluminum. The gold wavy gamma ray, a photon, passes through the paper and the aluminum, continues through the lead, and emerges on the far side as a dashed arrow labeled weakened, not stopped.
    Example 43.7: Energy released in tritium decay

    Tritium, \(^{3}_{1}\mathrm{H}\), undergoes \(\beta^-\) decay to \(^{3}_{2}\mathrm{He}\):

    \[{}^{3}_{1}\mathrm{H} \rightarrow {}^{3}_{2}\mathrm{He} + e^- + \bar{\nu}_e.\]

    Determine the total energy released. Use atomic masses \(m(^{3}\mathrm{H}) = 3.016049\,\mathrm{u}\) and \(m(^{3}\mathrm{He}) = 3.016029\,\mathrm{u}\).

    Solution

    When atomic (rather than nuclear) masses are used, the mass of the emitted \(\beta^-\) electron is automatically accounted for, because the daughter atom \(^{3}\mathrm{He}\) already includes one more atomic electron than the parent. The \(Q\) value is therefore simply

    \[Q = \big[m(^{3}\mathrm{H}) - m(^{3}\mathrm{He})\big]c^2 = (3.016049 - 3.016029)(931.494)\,\mathrm{MeV}\]

    \[= (0.0000200)(931.494) = 0.0186\,\mathrm{MeV} = \boxed{18.6\,\mathrm{keV}}.\]

    This tiny energy release, shared between the electron and the antineutrino, is precisely why tritium decay is used in modern experiments that attempt to measure the mass of the neutrino.

    Checkpoint 43.4

    A nucleus has many more neutrons than its stable isotopes do, placing it below the valley of stability. Will it most likely decay by \(\beta^-\) or \(\beta^+\)? Explain which way the decay moves it on the \(Z\)-versus-\(N\) chart.

    Answer

    Nuclear Fission

    Nuclear fission is the splitting of a heavy nucleus into two lighter ones, with the release of a large amount of energy. The reason energy is released is exactly the binding-energy curve of Figure 43.1: a heavy nucleus like uranium sits on the gentle right-hand slope at about \(7.6\,\mathrm{MeV}\) per nucleon, but its mid-mass fragments lie higher, near \(8.5\,\mathrm{MeV}\) per nucleon. The nucleons end up more tightly bound, and the difference emerges as energy.

    A fission chain reaction spreading left to right through three generations.
    Figure 43.5. A fission chain reaction. A single neutron triggers one fission, which releases two or more neutrons; each of those can trigger another fission, and the number of events multiplies from one generation to the next. Controlling this multiplication (keeping it at exactly one new fission per event) is what a reactor must do.
    Figure descriptionA fission chain reaction spreading left to right through three generations. A single red neutron arrow at the left strikes one uranium nucleus, drawn as a circle marked U. Two red neutron arrows leave it, striking two more uranium nuclei. Four arrows leave those, striking four more. The number of nuclei doubles at each step (one, then two, then four), and a note at the right reads growing cascade. Keeping this multiplication at exactly one is what a reactor must do.

    A typical fission begins when a \(^{235}\mathrm{U}\) nucleus absorbs a slow (“thermal”) neutron, briefly becoming highly unstable \(^{236}\mathrm{U}\), which then splits (Figure 43.6):

    \[{}^{235}_{92}\mathrm{U} + n \rightarrow {}^{236}_{92}\mathrm{U} \rightarrow {}^{140}_{54}\mathrm{Xe} + {}^{94}_{38}\mathrm{Sr} + 2n. \tag{43.17}\]

    The absorbed neutron’s binding energy leaves the \(^{236}\mathrm{U}\) nucleus excited, and it vibrates like a liquid drop. If it stretches far enough, the short-range strong force can no longer hold the two ends together, while the long-range electric repulsion between them keeps pushing, and the nucleus pulls apart.

    Four stages of a fission event, left to right.
    Figure 43.6. The stages of fission, pictured with the liquid-drop model of the nucleus. Once the excited \(^{236}\mathrm{U}\) stretches into a neck, the long-range electric repulsion between the two halves overwhelms the short-range strong force, and the nucleus splits into two fragments plus a few neutrons.
    Figure descriptionFour stages of a fission event, left to right. Panel a: a small gray neutron with an arrow approaches a round blue nucleus labeled uranium-235, with the caption a slow neutron arrives. Panel b: an elongated, egg-shaped nucleus labeled uranium-236 star, with the caption the excited nucleus stretches. Panel c: a peanut-shaped nucleus pinched in the middle, with the caption a neck forms and electric repulsion wins. Panel d: two green fragments labeled Xe and Sr flying apart in opposite directions, with two small gray neutrons also flying off, with the caption fragments fly apart, with 2 or 3 neutrons.

    The fragments are not fixed (many different pairs are possible) but they are always neutron-rich (having come from a neutron-heavy parent), so they go on to reach stability through chains of \(\beta^-\) decays. The two or three neutrons released are the key to a self-sustaining chain reaction: each can trigger another fission, which releases more neutrons, and so on (Figure 43.5). If on average more than one neutron from each fission goes on to cause another, the reaction grows; if fewer than one, it dies out. A reactor holds the average at exactly one, while a weapon lets the reaction grow as fast as possible.

    The energy per fission can be estimated directly from the binding-energy curve. Since the number of nucleons is conserved, the released energy is

    \[Q = A\left[(E_{bn})_{\text{final}} - (E_{bn})_{\text{initial}}\right]. \tag{43.18}\]

    For uranium, with \(A \approx 238\) and a gain of roughly \(0.9\,\mathrm{MeV}\) per nucleon, this gives about \(200\,\mathrm{MeV}\) per fission: tens of millions of times the few electron-volts released in a chemical reaction such as burning.

    Example 43.8: Energy from a kilogram of uranium

    Calculate the energy released when \(1.00\,\mathrm{kg}\) of \(^{235}\mathrm{U}\) undergoes fission, taking the energy per fission event to be \(Q = 208\,\mathrm{MeV}\).

    Solution

    The number of \(^{235}\mathrm{U}\) nuclei in \(1.00\,\mathrm{kg}\) is

    \[N = \frac{1000\,\mathrm{g}}{235\,\mathrm{g/mol}}(6.022\times10^{23}\,\mathrm{mol^{-1}}) = 2.56\times10^{24}.\]

    The total energy is

    \[E = NQ = (2.56\times10^{24})(208\,\mathrm{MeV}) = 5.33\times10^{26}\,\mathrm{MeV}.\]

    Converting to joules with \(1\,\mathrm{MeV} = 1.602\times10^{-13}\,\mathrm{J}\),

    \[E = (5.33\times10^{26})(1.602\times10^{-13}\,\mathrm{J}) = \boxed{8.5\times10^{13}\,\mathrm{J}}.\]

    This is comparable to burning several thousand tonnes of coal: the energy density of nuclear fuel is staggering.

    Nuclear Power Plants

    Every commercial nuclear power plant operating today runs on controlled fission. The aim is to sustain a chain reaction at a steady rate (exactly one new fission per fission, a state called criticality) rather than letting it grow explosively or die out. A reactor core contains several key elements. The fuel, usually uranium enriched to a few percent \(^{235}\mathrm{U}\), is formed into rods. A moderator (often water) slows the fast fission neutrons to thermal speeds, where they are far more likely to cause further fission. Control rods of neutron-absorbing material (such as cadmium or boron) are inserted or withdrawn to tune the reaction rate, soaking up excess neutrons. A coolant carries the heat away to boil water into steam, which drives turbines and generators just as in any thermal power station. The nuclear core, in the end, is simply a very compact and very long-lived heat source.

    Example 43.9: Inside a power reactor

    A power station is driven by a pressurized-water reactor whose core produces \(3400\,\mathrm{MW}\) of thermal power, of which \(1100\,\mathrm{MW}\) is delivered as electricity. (a) What is the station’s efficiency? (b) At what rate \(R\) do fission events occur, taking \(208\,\mathrm{MeV}\) per fission? (c) At what rate is mass being converted to energy?

    Solution

    (a) Efficiency is useful output over input,

    \[e = \frac{1100\,\mathrm{MW}}{3400\,\mathrm{MW}} = \boxed{0.324} = 32.4\%.\]

    (b) Each fission delivers \(208\,\mathrm{MeV} = (208)(1.602\times10^{-13}\,\mathrm{J}) = 3.33\times10^{-11}\,\mathrm{J}\) of thermal energy, so to produce \(3400\,\mathrm{MW} = 3.40\times10^{9}\,\mathrm{W}\),

    \[R = \frac{3.40\times10^{9}\,\mathrm{W}}{3.33\times10^{-11}\,\mathrm{J}} = \boxed{1.0\times10^{20}\ \text{fissions/s}}.\]

    (c) The mass converted to energy follows from \(P = (dm/dt)c^2\):

    \[\frac{dm}{dt} = \frac{P}{c^2} = \frac{3.40\times10^{9}\,\mathrm{W}}{(3.00\times10^{8}\,\mathrm{m/s})^2} = \boxed{3.8\times10^{-8}\,\mathrm{kg/s}},\]

    only about \(3\,\mathrm{g}\) per day, yet that tiny mass loss is the entire source of the plant’s enormous output.

    Nuclear Fusion

    At the opposite end of the binding-energy curve, energy can be released by joining light nuclei together rather than splitting heavy ones. This is nuclear fusion, and per kilogram of fuel it releases even more energy than fission, because the left-hand slope of the binding-energy curve is so steep. It is also the process that powers the stars.

    A graph of potential energy U against the separation r of two approaching nuclei.
    Figure 43.7. Potential energy of two approaching nuclei. As they near each other the Coulomb repulsion drives \(U(r)\) up like \(1/r\), forming a barrier; only once they are within about \(r = R\) does the strong force take over and pull them into the deep attractive well, fusing them. Typical thermal energies (gold) fall far below the barrier peak, which is why fusion requires enormous temperatures.
    Figure descriptionA graph of potential energy U against the separation r of two approaching nuclei. Coming in from large separation on the right, the curve rises like one over r as the nuclei repel electrically, reaching a peak marked by a dashed red line labeled Coulomb barrier at a separation r equals capital R. Inside that radius the curve plunges steeply through zero into a deep negative well labeled nuclear well, where the short-range strong force takes over and binds the nuclei. A gold dashed line drawn well below the top of the barrier marks typical thermal energy k T; it meets the curve well outside R, and a dotted continuation labeled must tunnel shows the stretch of barrier a nucleus with that energy could cross only by quantum tunneling.

    Fusion is far harder to achieve than fission, however, because both nuclei are positively charged and repel each other fiercely. To get them close enough for the short-range strong force to take hold and bind them, they must overcome the Coulomb barrier, the hump in potential energy created by their electrical repulsion (Figure 43.7). For two light nuclei this barrier is of order a few hundred keV. Classically there is no way around it. Quantum mechanically the nuclei need not climb all the way to the top, because they can tunnel through the upper part of the barrier (Section 40.4), but they must still be slammed together hard enough to get close.

    The practical way to supply that energy in bulk is heat. The average thermal kinetic energy of a particle is \(K \approx kT\), and at room temperature this is only about \(0.03\,\mathrm{eV}\): ten million times too small. Only at temperatures of tens of millions of kelvin do nuclei move fast enough to fuse on their own; fusion driven by such extreme heat is called thermonuclear fusion. Even in the Sun’s core, at \(1.5\times10^{7}\,\mathrm{K}\), the typical thermal energy \(kT\) is only about \(1\,\mathrm{keV}\), hundreds of times below the barrier. Fusion happens there only because the fastest few nuclei in the thermal distribution tunnel through the barrier, which is one reason the Sun burns its fuel so slowly. Containing matter that hot is the central engineering challenge: the two leading approaches are magnetic confinement, which traps a hot plasma in a doughnut-shaped magnetic field (the tokamak, such as ITER, under construction in France), and inertial confinement, which crushes and heats a tiny fuel pellet with intense laser beams (as at the National Ignition Facility in California). Fusion’s appeal is great (abundant fuel, no long-lived radioactive waste, no possibility of a meltdown). In 2022 the National Ignition Facility became the first to get more fusion energy out of a pellet than the laser light delivered to it, but no fusion device has yet produced more energy than the whole facility consumes, and reaching that point remains one of the hardest problems in applied physics.

    Example 43.10: Deuterium–tritium fusion

    A leading candidate fusion reaction combines deuterium and tritium:

    \[{}^{2}_{1}\mathrm{H} + {}^{3}_{1}\mathrm{H} \rightarrow {}^{4}_{2}\mathrm{He} + n.\]

    Find the energy released, using masses \(m(^{2}\mathrm{H}) = 2.014102\,\mathrm{u}\), \(m(^{3}\mathrm{H}) = 3.016049\,\mathrm{u}\), \(m(^{4}\mathrm{He}) = 4.002603\,\mathrm{u}\), and \(m_n = 1.008665\,\mathrm{u}\).

    Solution

    The \(Q\) value is the mass defect times \(c^2\):

    \[Q = \big[(2.014102 + 3.016049) - (4.002603 + 1.008665)\big](931.494)\,\mathrm{MeV}\]

    \[= (0.018883)(931.494) = \boxed{17.6\,\mathrm{MeV}}.\]

    This single reaction releases \(17.6\,\mathrm{MeV}\), and crucially, it does so from just five nucleons, so the energy per nucleon (about \(3.5\,\mathrm{MeV}\)) far exceeds that of fission (about \(0.9\,\mathrm{MeV}\)). That is why fusion fuel is so energy-dense.

    In the Sun, fusion proceeds by the proton–proton chain, whose net effect is to combine four protons into one helium nucleus:

    \[4\,{}^{1}\mathrm{H} \rightarrow {}^{4}\mathrm{He} + 2e^+ + 2\nu_e + \text{energy}.\]

    Each completed chain releases about \(26.7\,\mathrm{MeV}\), of which roughly \(0.5\,\mathrm{MeV}\) escapes immediately with the neutrinos, leaving \(26.2\,\mathrm{MeV}\) as the thermal energy that ultimately streams away as sunlight. The same fusion processes, occurring in stars and in their explosive deaths, are also where almost all the chemical elements heavier than hydrogen were forged: the carbon in your body and the iron in your blood were made inside stars.

    Checkpoint 43.5

    Per nucleon, fusion releases several times as much energy as fission, and its fuel is far more abundant. Yet we generate power commercially with fission and not (yet) with fusion. Referring to the Coulomb barrier of Figure 43.7, explain the basic physical reason fusion is so much harder to achieve.

    Answer

    Answers to Checkpoints

    Checkpoint 43.4. \(\beta^-\) decay. A neutron-rich nucleus has too many neutrons for its protons. In \(\beta^-\) decay a neutron turns into a proton, emitting an electron and an antineutrino, so \(N\) drops by one and \(Z\) rises by one. That moves the nucleus diagonally up toward the valley of stability. (\(\beta^+\) decay would do the opposite, and is the path for proton-rich nuclei.)

    Checkpoint 43.5. In fusion, both nuclei are positively charged, so they repel each other electrically. The strong force that binds them acts only when they come within a few femtometers, and reaching that distance means climbing the Coulomb barrier of Figure 43.7. That takes enormous kinetic energies (temperatures of order \(10^8\,\mathrm{K}\)) and holding such a hot plasma together long enough for many fusions is extremely difficult. Fission faces no such barrier: it is triggered by a neutron, which has no charge and can drift into a uranium nucleus at low speed.


    This page titled 43.4: Nuclear Reactions was last modified on Thu, 12 Nov 2026 04:27:16 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Michael Ragsdale.