11.E: Rotation II (Problems)

Physics: A Foundation for Scientists and Engineers · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    11.E: Rotation II (Problems)

    Difficulty key: ★ introductory, ★★ standard, ★★★ challenging.

    Section 11.1 — Rotational Kinetic Energy

    11.1 ★ A flywheel has a moment of inertia of \(2.5\,\mathrm{kg\cdot m^2}\) and spins at \(40\,\mathrm{rad/s}\). Find its rotational kinetic energy.

    11.2 ★★ [Real-world: energy storage.] A flywheel (solid disk, \(120\,\mathrm{kg}\), radius \(0.50\,\mathrm{m}\)) stores energy by spinning at \(3000\,\mathrm{rpm}\).

    1. Find its moment of inertia.
    2. How much energy does it store?

    11.3 ★★ [Conceptual.] Two solid spheres have the same mass, but one has twice the radius of the other. Spun at the same angular velocity, which stores more rotational kinetic energy, and by what factor?

    11.4 ★★ A solid disk of mass \(3.0\,\mathrm{kg}\) and radius \(0.20\,\mathrm{m}\) rolls without slipping at \(4.0\,\mathrm{m/s}\).

    1. Find its translational and rotational kinetic energies.
    2. What fraction of its total kinetic energy is rotational?

    11.5 ★★ A solid sphere (\(I = \tfrac{2}{5}mR^2\)) is released from rest at the top of a ramp of height \(1.2\,\mathrm{m}\) and rolls down without slipping. Use energy conservation to find its center-of-mass speed at the bottom. (Use \(v_{\rm cm} = R\omega\).)

    11.6 ★★ [Conceptual.] A hoop, a solid disk, and a solid sphere of equal mass and radius are released together from the top of a ramp and roll down without slipping.

    1. In what order do they reach the bottom? Explain in terms of how each one’s moment of inertia splits the energy between translation and rotation.
    2. Check your ordering against equation (10.15), and explain why the masses and radii drop out of that result.
    3. Which of the three needs the roughest ramp to keep from slipping?

    Section 11.2 — Rotational Work

    11.7 ★ A constant torque of \(15\,\mathrm{N\cdot m}\) turns a wheel through \(20\,\mathrm{rad}\). How much work does it do?

    11.8 ★★ A motor applies a constant \(25\,\mathrm{N\cdot m}\) torque to a wheel (\(I = 0.80\,\mathrm{kg\cdot m^2}\)), initially at rest, through \(12\,\mathrm{rad}\).

    1. How much work does the motor do?
    2. Using the work–kinetic energy theorem, find the wheel’s final angular speed.

    11.9 ★★★ [Real-world: sports.] A solid disk (a discus idealization) of mass \(2.0\,\mathrm{kg}\) and radius \(0.11\,\mathrm{m}\) is spun up from rest to \(45\,\mathrm{rad/s}\).

    1. How much rotational kinetic energy does it have?
    2. If this is achieved over an angular displacement of \(6.0\,\mathrm{rad}\), what average torque was applied?

    11.10 ★ [Conceptual.] The same constant torque acts on two wheels of equal moment of inertia, but wheel A is allowed to turn through twice the angle that wheel B does.

    1. On which wheel is more work done? Explain.
    2. Which ends up with the greater rotational kinetic energy, and which with the greater angular speed? Justify using the rotational work–kinetic energy theorem.

    Section 11.3 — Angular Momentum

    11.11 ★ A \(0.50\,\mathrm{kg}\) ball moves at \(4.0\,\mathrm{m/s}\) along a line that passes \(2.0\,\mathrm{m}\) from a fixed point \(O\). Find the magnitude of its angular momentum about \(O\).

    11.12 ★ A solid cylinder (\(I = \tfrac{1}{2}MR^2\)) of mass \(2.0\,\mathrm{kg}\) and radius \(0.15\,\mathrm{m}\) spins about its central axis at \(20\,\mathrm{rad/s}\). Find its angular momentum.

    11.13 ★★ A solid disk of moment of inertia \(0.40\,\mathrm{kg\cdot m^2}\) spins at \(15\,\mathrm{rad/s}\).

    1. Find its angular momentum.
    2. What constant torque would stop it in \(3.0\,\mathrm{s}\)? (Use \(\tau = dL/dt\).)

    11.14 ★★ [Conceptual.] Explain why a spinning bicycle wheel held by its axle is hard to tilt, while the same wheel not spinning tilts easily. Frame your answer in terms of angular momentum and torque.

    Section 11.4 — Conservation of Angular Momentum

    11.15 ★ [Conceptual.] A figure skater spins with her arms outstretched, then pulls them in close to her body.

    1. What happens to her rate of spin, and why?
    2. Her rotational kinetic energy increases. Where does that extra energy come from?

    11.16 ★★ A merry-go-round (a uniform disk, \(I = 500\,\mathrm{kg\cdot m^2}\)) turns freely at \(1.5\,\mathrm{rad/s}\). A \(40\,\mathrm{kg}\) child, initially at the center, walks out to the rim at \(2.0\,\mathrm{m}\). Find the new angular speed. (Treat the child as a point mass.)

    11.17 ★★ [Real-world: astronomy.] A spinning cloud of gas contracts to one-tenth of its original radius with no external torque. Treating it as a uniform sphere of unchanged mass, by what factor does its angular speed increase? By what factor does its rotational kinetic energy increase?

    11.18 ★★★ A \(0.20\,\mathrm{kg}\) puck moves in a circle of radius \(0.80\,\mathrm{m}\) on a frictionless table at \(3.0\,\mathrm{m/s}\), held by a string through a hole in the center. Find its angular momentum. If the string is pulled to shrink the radius to \(0.40\,\mathrm{m}\), find the new speed using conservation of angular momentum. Why does the string tension exert no torque about the hole?

    11.19 ★★★ A \(2.0\,\mathrm{kg}\) disk of radius \(0.25\,\mathrm{m}\) spins at \(12\,\mathrm{rad/s}\). A second, non-spinning disk of the same size and mass is dropped onto it and the two spin together (a rotational “perfectly inelastic collision”).

    1. Find the common final angular speed.
    2. How much rotational kinetic energy is lost?

    Section 11.5 — Precession

    11.20 ★ [Conceptual.] Using \(\Omega = mgr/(I\omega)\), explain why a rapidly spinning top precesses slowly, and predict what happens to the precession as friction gradually slows the spin.

    11.21 ★★ A toy gyroscope’s wheel has moment of inertia \(2.0\times 10^{-4}\,\mathrm{kg\cdot m^2}\) and spins at \(150\,\mathrm{rad/s}\). Its center of mass is \(0.040\,\mathrm{m}\) from the pivot, and its mass is \(0.060\,\mathrm{kg}\). Find the precession angular velocity.

    11.22 ★★ A gyroscope precesses once every \(6.0\,\mathrm{s}\) while its wheel (\(I = 5.0\times 10^{-3}\,\mathrm{kg\cdot m^2}\), \(m = 0.25\,\mathrm{kg}\)) spins with its center of mass \(0.080\,\mathrm{m}\) from the pivot. Find the spin angular velocity of the wheel, and verify that \(\Omega \ll \omega\) as the derivation of equation (11.10) assumes.

    11.23 ★★★ [Real-world: engineering.] A flywheel-based attitude sensor uses a disk of mass \(0.40\,\mathrm{kg}\) and radius \(0.050\,\mathrm{m}\) spinning about a horizontal axle pivoted \(0.020\,\mathrm{m}\) from the disk’s center. The design requires the precession period to be no shorter than \(30\,\mathrm{s}\).

    1. What is the minimum spin rate, in rad/s and in rev/min?
    2. Bearing friction slowly reduces the spin rate. Does the precession period grow or shrink, and by what factor after the spin rate has dropped by \(10\%\)?

    Challenge Problems

    11.24 ★★★ A uniform rod of mass \(2.0\,\mathrm{kg}\) and length \(1.0\,\mathrm{m}\) is pivoted at one end on a frictionless horizontal axle and released from rest in the horizontal position. (Take \(I_{\text{end}} = \tfrac13 ML^2\).)

    1. Find the rod’s angular acceleration at the instant of release.
    2. Find the linear acceleration of the free end at that instant, and compare it with \(g\).
    3. Using energy conservation, find the rod’s angular speed when it reaches the vertical position.
    4. How fast is the free end moving at that point?

    11.25 ★★★ [Real-world: engineering.] A flywheel (solid disk, \(M = 50\,\mathrm{kg}\), \(R = 0.40\,\mathrm{m}\)) spins at \(1200\,\mathrm{rpm}\). A constant friction torque brings it to rest in \(90\,\mathrm{s}\).

    1. Find the flywheel’s moment of inertia and its initial rotational kinetic energy.
    2. Find the (constant) friction torque.
    3. Through how many revolutions does it turn before stopping?
    4. What is the average power dissipated by friction?

    11.26 ★★★ A \(50\,\mathrm{g}\) lump of putty moving at \(12\,\mathrm{m/s}\) strikes the free end of a uniform rod (\(M = 0.50\,\mathrm{kg}\), \(L = 0.80\,\mathrm{m}\)) pivoted at its other end, hitting perpendicular to the rod and sticking. (Use \(I_{\text{rod}} = \tfrac13 ML^2\).)

    1. Find the angular momentum of the putty about the pivot just before impact.
    2. Find the moment of inertia of the rod-plus-putty system.
    3. Find the angular speed immediately after the collision.
    4. Through what maximum angle does the rod swing up afterward?
    5. Linear momentum is clearly not conserved in this collision. Explain why angular momentum about the pivot nevertheless is.

    11.27 ★★★ A student sits at rest on a frictionless rotating stool (combined moment of inertia \(3.0\,\mathrm{kg\cdot m^2}\) about the vertical axis), holding a spinning bicycle wheel (\(I = 0.40\,\mathrm{kg\cdot m^2}\)) whose axis points straight up; the wheel spins at \(15\,\mathrm{rad/s}\).

    1. What is the total angular momentum about the vertical axis?
    2. The student flips the wheel so its axis points straight down. How fast, and in which sense, does the stool now rotate?
    3. Starting again from the original state, the student instead turns the wheel’s axis to horizontal. How fast does the stool rotate then?
    4. Why is the vertical component of angular momentum conserved here?

    This page titled 11.E: Rotation II (Problems) was last modified on Thu, 12 Nov 2026 04:26:54 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Michael Ragsdale.