Opening the book…
Difficulty key: ★ introductory, ★★ standard, ★★★ challenging. Use \(c_{\rm water} = 4186\,\mathrm{J/(kg\cdot K)}\), \(c_{\rm ice} = 2090\,\mathrm{J/(kg\cdot K)}\), \(L_f = 3.33\times 10^{5}\,\mathrm{J/kg}\), \(L_v = 2.26\times 10^{6}\,\mathrm{J/kg}\), \(R = 8.314\,\mathrm{J/(mol\cdot K)}\), \(\sigma = 5.67\times 10^{-8}\,\mathrm{W/(m^2\cdot K^4)}\), Tables 37.1–37.4, and other constants as given.
Section 37.1 — Heat: Temperature Changes and Phase Changes
37.1 ★ How much heat is required to raise the temperature of \(2.0\,\mathrm{kg}\) of water from \(20^{\circ}\mathrm{C}\) to \(80^{\circ}\mathrm{C}\)?
37.2 ★ [History of science.] Joule is said to have measured the water temperature at the top and bottom of a waterfall on his honeymoon. If all of the gravitational potential energy of water falling \(50\,\mathrm{m}\) became internal energy of the water, how much warmer would it be at the bottom? Why was this a hard experiment?
37.3 ★★ A \(0.50\,\mathrm{kg}\) block of aluminum (\(c = 900\,\mathrm{J/(kg\cdot K)}\)) absorbs \(2.7\times 10^{4}\,\mathrm{J}\) of heat. By how much does its temperature rise?
37.4 ★★ How much heat must be removed from \(0.30\,\mathrm{kg}\) of water at \(20^{\circ}\mathrm{C}\) to freeze it completely into ice at \(0^{\circ}\mathrm{C}\)?
37.5 ★★ [Real-world application: biology.] Sweating cools the body by evaporation. Estimate the heat removed when \(0.20\,\mathrm{kg}\) of sweat (treat as water) evaporates from the skin at body temperature.
37.6 ★★ How much heat is required to take \(0.50\,\mathrm{kg}\) of water from \(20^{\circ}\mathrm{C}\) all the way to steam at \(100^{\circ}\mathrm{C}\)?
37.7 ★★ A \(0.30\,\mathrm{kg}\) block of ice at \(0^{\circ}\mathrm{C}\) is added to a drink. How much heat must be supplied to melt the ice completely and then warm the meltwater to \(10^{\circ}\mathrm{C}\)?
Section 37.1.3 — Calorimetry
37.8 ★★ A \(0.25\,\mathrm{kg}\) piece of copper (\(c = 387\,\mathrm{J/(kg\cdot K)}\)) at \(150^{\circ}\mathrm{C}\) is dropped into \(0.40\,\mathrm{kg}\) of water at \(20^{\circ}\mathrm{C}\) in an insulated cup of negligible heat capacity. Find the equilibrium temperature.
37.9 ★★★ A \(0.10\,\mathrm{kg}\) ice cube at \(0^{\circ}\mathrm{C}\) is dropped into \(0.50\,\mathrm{kg}\) of water at \(30^{\circ}\mathrm{C}\) in an insulated container.
- Show that all the ice melts.
- Find the final temperature of the mixture.
37.10 ★★ A \(200\,\mathrm{g}\) block of metal at \(95^{\circ}\mathrm{C}\) is dropped into \(300\,\mathrm{g}\) of water at \(20^{\circ}\mathrm{C}\) in an insulated cup, reaching a final temperature of \(26^{\circ}\mathrm{C}\). Neglecting the cup, find the specific heat of the metal.
Sections 37.2–37.3 — The First Law and Thermodynamic Processes
37.11 ★ [Conceptual.] For each process, state what is zero (\(Q\), \(W\), or \(\Delta E_{\rm int}\)): (a) an adiabatic compression; (b) an isovolumetric heating; (c) the isothermal process of an ideal gas (recall \(E_{\rm int}\) depends only on \(T\)).
37.12 ★★ A gas is compressed isobarically at \(1.5\times 10^{5}\,\mathrm{Pa}\) from \(0.080\,\mathrm{m^3}\) to \(0.050\,\mathrm{m^3}\), and in the process it releases \(8.0\times 10^{3}\,\mathrm{J}\) of heat.
- Find the work done on the gas.
- Find the change in internal energy.
37.13 ★★ An ideal gas is compressed, with \(400\,\mathrm{J}\) of work done on it while it releases \(250\,\mathrm{J}\) of heat to its surroundings. Find the change in its internal energy.
37.14 ★★ \(2.0\,\mathrm{mol}\) of an ideal gas expands isothermally at \(350\,\mathrm{K}\) to twice its original volume.
- Find the work done by the gas.
- How much heat flows, and in which direction?
37.15 ★★ A monatomic ideal gas is taken from state \(i\) (\(1.0\,\mathrm{L}\), \(2.0\times 10^{5}\,\mathrm{Pa}\)) to state \(f\) (\(3.0\,\mathrm{L}\), \(2.0\times 10^{5}\,\mathrm{Pa}\)) by two different paths. Path A is a single isobaric expansion. Path B first raises the pressure at constant volume to \(4.0\times 10^{5}\,\mathrm{Pa}\), then expands isobarically to \(3.0\,\mathrm{L}\), then lowers the pressure at constant volume to \(2.0\times 10^{5}\,\mathrm{Pa}\). (a) Sketch both paths on a \(P\)–\(V\) diagram. (b) For each path, find the work done by the gas, the change in internal energy, and the heat absorbed. (c) Which quantities are the same for both paths, and why?
37.16 ★★ \(2.0\,\mathrm{mol}\) of nitrogen gas is heated from \(300\,\mathrm{K}\) to \(350\,\mathrm{K}\). Using Table 37.3, find the heat required (a) at constant volume and (b) at constant pressure. (c) Show that the difference equals the work the gas does in case (b).
37.17 ★★ [Real-world application: the bicycle pump.] Air at \(20^{\circ}\mathrm{C}\) and \(1.0\times 10^{5}\,\mathrm{Pa}\) is compressed quickly, and so adiabatically, to one third of its original volume. Treat air as a diatomic ideal gas. Find (a) its final temperature and (b) its final pressure. (c) Compare with the final pressure if the same compression were done slowly enough to be isothermal.
Section 37.4 — Heat Transfer Mechanisms & the Coastal Climate
37.18 ★ [Conceptual.] Name the dominant heat-transfer mechanism in each: (a) a hand warmed near (not touching) a campfire; (b) a metal railing chilling your hand on a cold day; (c) a hot-air balloon rising.
37.19 ★★ A copper rod \(0.50\,\mathrm{m}\) long with a cross-sectional area of \(1.0\,\mathrm{cm^2}\) is insulated along its sides. One end is held in boiling water at \(100^{\circ}\mathrm{C}\) and the other in an ice–water mixture at \(0^{\circ}\mathrm{C}\). (a) At what rate does heat flow along the rod? (b) How many grams of ice melt per hour?
37.20 ★★ A window is a single pane of glass \(4.0\,\mathrm{mm}\) thick. A double-glazed replacement has two \(3.0\,\mathrm{mm}\) panes separated by a \(12\,\mathrm{mm}\) gap of still air. (a) Find the thermal resistance per unit area, \(\sum L/k\), of each. (b) By what factor does the double pane reduce the heat flow, according to these numbers? (c) Measured improvements are much smaller, closer to a factor of three. Suggest two reasons.
37.21 ★★ [Real-world application: astronomy.] The Sun is very nearly a blackbody (\(\varepsilon = 1\)) with a radius of \(6.96\times 10^{8}\,\mathrm{m}\) and a surface temperature of \(5772\,\mathrm{K}\). (a) Find its total power output. (b) Find the intensity of sunlight at Earth’s distance, \(1.50\times 10^{11}\,\mathrm{m}\), and compare with the measured value of about \(1361\,\mathrm{W/m^2}\).
37.22 ★★★ [Real-world application: the coastal climate.] Reread the chapter opener. A coastal town sits beside the ocean; an inland town sits beside dry soil (\(c_{\rm soil} \approx 800\,\mathrm{J/(kg\cdot K)}\)).
- The same midday sunlight delivers the same heat \(Q\) to equal masses of seawater and of dry soil. Using \(\Delta T = Q/(mc)\), find the ratio of the soil’s temperature rise to the water’s.
- Explain in one or two sentences how this ratio accounts for the mild coastal climate and the extreme inland one.
- At night both surfaces radiate heat away. Will the coast or the inland town cool more, and why?
Challenge Problems
37.23 ★★★ [Real-world application: energy — a solar water heater.] A rooftop collector of area \(4.0\,\mathrm{m^2}\) receives sunlight at an intensity of \(800\,\mathrm{W/m^2}\) and delivers \(62\%\) of that energy to the water in a \(150\,\mathrm{L}\) tank. Take \(c_{\rm water} = 4186\,\mathrm{J/(kg\cdot K)}\) and \(\rho_{\rm water} = 1000\,\mathrm{kg/m^3}\).
- How much heat is required to raise the tank from \(15^{\circ}\mathrm{C}\) to \(55^{\circ}\mathrm{C}\)?
- What useful power does the collector deliver?
- How long does the heating take, in hours?
- Water’s volume expansion coefficient near room temperature is \(\beta \approx 2.1\times 10^{-4}\,\mathrm{K^{-1}}\). By how many liters does the tank’s water expand over that temperature rise? Explain why a sealed solar hot-water system must include an expansion tank, and estimate what would happen to the pressure without one.
37.24 ★★★ [Real-world application: engineering — an air-compressor cycle.] \(2.0\,\mathrm{mol}\) of a monatomic ideal gas is taken around the closed cycle \(A \to B \to C \to A\):
- \(A \to B\): isobaric expansion at \(P = 1.0\times 10^{5}\,\mathrm{Pa}\) from \(V_A = 0.050\,\mathrm{m^3}\) to \(V_B = 0.100\,\mathrm{m^3}\);
- \(B \to C\): isovolumetric cooling back to the starting temperature;
- \(C \to A\): isothermal compression back to \(V_A\).
- Find the temperature at each of the three states.
- For each leg, find the work done by the gas, the change in internal energy, and the heat transferred. (Recall \(E_{\rm int} = \tfrac32 nRT\) for a monatomic gas, and \(W_{\rm by} = nRT\ln(V_f/V_i)\) for an isothermal step.)
- Verify that \(\Delta E_{\rm int} = 0\) around the complete cycle, and that the net work done by the gas equals the net heat absorbed.
- Sketch the cycle on a \(P\)–\(V\) diagram, state whether it runs clockwise or counterclockwise, and compute the ratio of the net work to the heat absorbed on the \(A \to B\) leg. What does that ratio represent?
This page titled 37.E: Heat and the First Law of Thermodynamics (Problems) was last modified on Thu, 12 Nov 2026 04:26:56 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Michael Ragsdale.
The book could not be loaded just now.