Opening the book…
Decades before Newton, Johannes Kepler distilled Tycho Brahe’s lifetime of planetary observations into three empirical laws. Newton’s gravity explains all three. Although Kepler stated them for planets orbiting the Sun, they hold for any body orbiting a much more massive one: moons about planets, satellites about the Earth, stars about the center of the galaxy.
Kepler’s first law: Every planet moves in an elliptical orbit with the Sun at one focus (Figure 13.3). A circle is the special case in which the two foci coincide; real orbits are slightly elongated, with the planet nearest the Sun at perihelion and farthest at aphelion. Nothing physical sits at the second focus: it is a geometric consequence of the inverse-square law, nothing more.
Kepler’s second law: The line from the Sun to a planet sweeps out equal areas in equal times (Figure 13.4). This means a planet moves faster when near the Sun and slower when far away. It is a direct consequence of the conservation of angular momentum from Chapter 11: gravity pulls straight along the Sun–planet line and so exerts no torque about the Sun, leaving \(L\) constant. Quantitatively, the rate at which area is swept is
\[\frac{dA}{dt} = \frac{L}{2m_2},\]
and since \(L\) never changes, neither does \(dA/dt\), which is Kepler’s second law exactly. Combined with \(L = m_2 v r\) at perihelion and aphelion (where \(\vec{v}\perp\vec{r}\)), this gives the useful relation \(v_p r_p = v_a r_a\).
Kepler’s third law: The square of a planet’s orbital period is proportional to the cube of its semimajor axis. For a circular orbit this follows directly from \(v = \sqrt{Gm_1/r}\) and \(T = 2\pi r/v\), which give:
Key Equation: Kepler’s third law
\[T^2 = \frac{4\pi^2}{G m_1}\,a^3, \tag{13.6}\]
where \(a\) is the semimajor axis (the orbital radius for a circle) and \(m_1\) is the central mass. Although we derived it for a circle, the law holds for every ellipse once \(r\) is replaced by \(a\). The proportionality constant depends only on \(m_1\), so a single measured orbit reveals the mass it circles, and it does so without any knowledge of the orbiting body’s mass, which is why we can weigh a star we have never visited by watching a planet go around it.
Two footnotes on that. Strictly, the constant involves the total mass \(m_1 + m_2\), because both bodies orbit their common center of mass; for a planet around a star, or a satellite around a planet, \(m_2\) is negligible and equation (13.6) is excellent. And the orbital energy result of equation (13.4) generalizes the same way: an elliptical orbit has \(E = -Gm_1m_2/2a\), depending on the semimajor axis alone and not on how elongated the orbit is.
Example 13.7: Weighing the Sun
The Earth orbits the Sun once every \(T = 3.156\times 10^{7}\,\mathrm{s}\) at a mean distance \(a = 1.496\times 10^{11}\,\mathrm{m}\). Find the mass of the Sun.
Solution
Kepler’s third law for a planet of orbit radius \(a\) around a central mass \(m_S\) reads \(T^2 = 4\pi^2a^3/(Gm_S)\). We want \(m_S\), which sits in the denominator: multiply both sides by \(Gm_S\), then divide both sides by \(GT^2\):
\[Gm_S\,T^2 = 4\pi^2a^3 \;\Longrightarrow\; m_S = \frac{4\pi^2 a^3}{G\,T^2}.\]
Evaluate numerator and denominator separately. Cubing \(1.496\times10^{11}\) cubes both parts: \((1.496)^3 = 3.348\) and \((10^{11})^3 = 10^{33}\), so \(4\pi^2a^3 = (39.48)(3.348\times10^{33}) = 1.32\times10^{35}\). In the denominator, \((3.156\times10^7)^2 = 9.960\times10^{14}\), and \((6.674\times10^{-11})(9.960\times10^{14}) = 6.65\times10^{4}\). So
\[m_S = \frac{4\pi^2 (1.496\times10^{11})^3}{(6.674\times10^{-11})(3.156\times10^{7})^2} = \frac{1.32\times10^{35}}{6.65\times10^{4}}\,\mathrm{kg} \approx \boxed{1.99\times 10^{30}\,\mathrm{kg}}.\]
(Dividing powers of ten subtracts exponents: \(10^{35}/10^{4} = 10^{31}\), and \(1.32/6.65 = 0.199\), giving \(0.199\times10^{31} = 1.99\times10^{30}\).) The units reduce to kilograms: \(\,\mathrm{m^3}/(\,\mathrm{N\cdot m^2/kg^2}\cdot\,\mathrm{s^2}) = \,\mathrm{m^3\cdot kg^2}/(\,\mathrm{kg\cdot m^3})= \,\mathrm{kg}\).
We have weighed the Sun using nothing but the size and period of Earth’s orbit: and, notably, without ever needing the Earth’s own mass. The Sun turns out to be about \(3\times10^5\) times as massive as the Earth.
Checkpoint 13.5
Jupiter is about \(5.2\) times as far from the Sun as the Earth is. Without a calculator, estimate Jupiter’s orbital period in Earth years, and check your estimate against the fact that Jupiter takes roughly \(12\) years to circle the sky once. Then answer a question Kepler could not: two of Jupiter’s moons have very different masses but happen to orbit at the same radius. Which one has the longer period?
Answers to Checkpoints
Checkpoint 13.5. By Kepler’s third law, \(T^2 \propto a^3\), so \(T_J = (5.2)^{3/2}\) years. Since \(5.2^{3/2} = 5.2\times\sqrt{5.2} \approx 5.2\times2.3 \approx 12\), Jupiter’s period is about \(12\) years, matching the observation. The two moons have the same period: \(T^2 = 4\pi^2a^3/(GM)\) depends only on the orbit’s size and the central mass (Jupiter’s), not on the orbiting body’s own mass.
This page titled 13.4: Kepler’s Laws of Planetary Motion was last modified on Thu, 12 Nov 2026 04:27:19 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Michael Ragsdale.
The book could not be loaded just now.