8.E: Conservation of Energy (Problems)

Physics: A Foundation for Scientists and Engineers · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    8.E: Conservation of Energy (Problems)

    Difficulty key: ★ introductory, ★★ standard, ★★★ challenging.

    Section 8.1 — Where Does the Work Go?

    8.1 ★ [Conceptual.] In each case a hand does positive work. Say whether the work goes mainly into kinetic energy, potential energy, or thermal energy, and name the system you have in mind.

    1. A hockey puck is pushed from rest across frictionless ice.
    2. A box is lifted onto a shelf at constant speed.
    3. A spring is slowly compressed.
    4. A crate is dragged across a rough floor at constant speed.

    8.2 ★ [Conceptual.] A book is lifted at constant speed from the floor to a table.

    1. Taking the book alone as the system, what is the net work done on it, and does its energy change?
    2. Taking the book and the Earth as the system, what external work is done, and what kind of energy does the system gain?
    3. Explain why the two answers do not contradict each other.

    Section 8.2 — Kinetic Energy and the Work–Kinetic Energy Theorem

    8.3 ★ Find the kinetic energy of (a) a \(0.145\,\mathrm{kg}\) baseball thrown at \(40\,\mathrm{m/s}\), and (b) a \(1500\,\mathrm{kg}\) car moving at \(30\,\mathrm{m/s}\).

    8.4 ★★ [Conceptual.] A truck and a motorcycle have the same kinetic energy.

    1. Which is moving faster, and why?
    2. If instead they have the same speed, which has more kinetic energy?

    8.5 ★★ An electron of mass \(9.11\times 10^{-31}\,\mathrm{kg}\) moves at \(2.0\times 10^{6}\,\mathrm{m/s}\). Find its kinetic energy in joules, and comment on the size of the number.

    8.6 ★★ A \(0.45\,\mathrm{kg}\) ball is thrown straight up at \(18\,\mathrm{m/s}\).

    1. Using the work–kinetic energy theorem, find the height at which its speed has dropped to \(9.0\,\mathrm{m/s}\). (Neglect air resistance.)
    2. What is the net work done on the ball between launch and that height?

    8.7 ★★ [Real-world: transportation.] A \(1100\,\mathrm{kg}\) car traveling at \(25\,\mathrm{m/s}\) brakes to a stop.

    1. How much work do the brakes (and friction) do on the car?
    2. If the same car is traveling at twice the speed, how does the stopping distance compare, assuming the same braking force? Explain using the work–kinetic energy theorem.

    8.8 ★★ Return to the force–position graph of Problem 7.18. The object has mass \(2.0\,\mathrm{kg}\), starts from rest at \(x = 0\), and no other force does work on it. How fast is it moving at \(x = 2\,\mathrm{m}\), and at \(x = 5\,\mathrm{m}\)?

    8.9 ★★ A \(30\,\mathrm{kg}\) sled starts from rest on level snow (\(\mu_k = 0.20\)) and is pulled by a rope with a tension of \(80\,\mathrm{N}\) directed \(25^\circ\) above the horizontal.

    1. Draw the free-body diagram and find the normal force and the friction force.
    2. Find the work done by each force over the first \(10\,\mathrm{m}\), and the net work.
    3. Use the work–kinetic energy theorem to find the sled’s speed after \(10\,\mathrm{m}\).

    8.10 ★★ [Real-world: forensics.] After a collision, an accident investigator measures skid marks \(40\,\mathrm{m}\) long left by a car that locked its brakes on a level road. The coefficient of kinetic friction for rubber on that pavement is \(0.70\).

    1. Use the work–kinetic energy theorem to estimate the car’s speed when the skid began. Does your answer depend on the car’s mass?
    2. On wet pavement (\(\mu_k = 0.65\)), how long would the skid be for a car traveling at \(28\,\mathrm{m/s}\)?

    8.11 ★★ Return to the crate of Problem 7.14, released from rest on a \(25^\circ\) ramp. How fast is it moving when its energy has increased by \(100\,\mathrm{J}\)? Check your answer with Newton’s second law and the kinematics of Chapter 2.

    8.12 ★★★ A \(2.0\,\mathrm{kg}\) block is pushed up a frictionless \(20^\circ\) incline by a force of \(15\,\mathrm{N}\) directed up the slope. Starting from rest, use the work–kinetic energy theorem to find its speed after it has traveled \(1.5\,\mathrm{m}\) along the incline. (Account for the work done by both the applied force and gravity.)

    Section 8.3 — Potential Energy

    8.13 ★ A \(2.0\,\mathrm{kg}\) textbook is lifted from the floor to a shelf \(1.8\,\mathrm{m}\) high.

    1. What is its gravitational potential energy relative to the floor?
    2. What would it be relative to a desk \(0.75\,\mathrm{m}\) high?
    3. Explain why both answers are acceptable.

    8.14 ★ [Conceptual.] Two identical balls are at the same height, one resting on a shelf and one moving upward past the shelf at \(4\,\mathrm{m/s}\).

    1. Do they have the same gravitational potential energy? Explain.
    2. Do they have the same total mechanical energy? Explain.

    8.15 ★★ A spring with force constant \(320\,\mathrm{N/m}\) is compressed \(0.12\,\mathrm{m}\).

    1. How much elastic potential energy is stored?
    2. If a \(0.50\,\mathrm{kg}\) ball is placed against the spring and released, how fast will it be moving when the spring reaches its relaxed length (assume a frictionless, horizontal surface)? (Use the work–kinetic energy theorem: the work the spring does on the ball is the energy that was stored in it.)

    8.16 ★★ Return to the mass of Problem 7.20, lowered slowly onto a spring until it hangs at rest.

    1. By how much does the gravitational potential energy change?
    2. How much elastic potential energy is stored in the spring at the end?
    3. The two answers do not add to zero. Where did the difference go?

    8.17 ★ [Real-world: hiking.] A \(65\,\mathrm{kg}\) hiker descends from the rim of a canyon to the canyon floor, \(120\,\mathrm{m}\) below. Taking the rim as the reference level, what is the hiker’s gravitational potential energy on the canyon floor? Is a negative answer a problem? Explain.

    Section 8.4 — Conservative and Nonconservative Forces

    8.18 ★ [Conceptual.] Classify each force as conservative or nonconservative, and give a one-sentence reason: (a) gravity, (b) the force of a spring, (c) sliding (kinetic) friction, (d) air resistance.

    8.19 ★ [Conceptual.] You carry a suitcase from the ground floor to the third floor of a building.

    1. Does the work done by gravity depend on whether you take the stairs or the elevator? Explain.
    2. Does the work you do against gravity depend on the route? What does this tell you about gravity being conservative?

    8.20 ★★ A \(2.0\,\mathrm{kg}\) block is pushed around a closed rectangular loop on a level floor and returns to its starting point.

    1. What is the total work done by gravity over the loop?
    2. If the coefficient of kinetic friction is \(0.30\) and the loop’s perimeter is \(6.0\,\mathrm{m}\), how much mechanical energy is dissipated by friction?

    8.21 ★★ [Conceptual.] A ball is dropped and bounces several times, returning to a lower height after each bounce until it stops.

    1. Is mechanical energy conserved during this process? Explain.
    2. Is total energy conserved? Where does the “lost” mechanical energy go?

    8.22 ★★ A \(4.0\,\mathrm{kg}\) object slides \(3.0\,\mathrm{m}\) down a rough incline, and friction removes \(22\,\mathrm{J}\) of mechanical energy. Find the friction force, assuming it is constant.

    8.23 ★★ The potential energy of a particle moving along the \(x\)-axis is \(U(x) = 5.0x^2 - 2.0x^3\), with \(U\) in joules and \(x\) in meters.

    1. Find the force \(F_x(x)\) on the particle.
    2. Find the force at \(x = 1.0\,\mathrm{m}\) and at \(x = 2.0\,\mathrm{m}\), and give the direction of each.
    3. At what positions is the force zero?

    8.24 ★★★ A block slides down a curved, frictionless ramp from a height \(h\) and then continues onto a rough horizontal surface where it eventually stops. Explain, using equations (8.10) and (8.9), why the stopping distance on the flat depends on \(h\) and the coefficient of friction but not on the shape of the ramp.

    Section 8.5 — Conservation of Mechanical Energy

    8.25 ★ A \(0.25\,\mathrm{kg}\) ball is dropped from rest at a height of \(12\,\mathrm{m}\).

    1. Use conservation of energy to find its speed just before it hits the ground.
    2. Does the answer depend on the ball’s mass? Explain.

    8.26 ★ A \(60\,\mathrm{kg}\) skateboarder starts from rest at the top of a frictionless ramp \(4.0\,\mathrm{m}\) high. How fast is she moving at the bottom?

    8.27 ★★ A pendulum bob is released from rest with its string horizontal. The string is \(1.2\,\mathrm{m}\) long.

    1. How fast is the bob moving at the lowest point?
    2. How fast is it moving when the string makes a \(45^\circ\) angle with the vertical?

    8.28 ★★ [Real-world: sports.] A \(55\,\mathrm{kg}\) pole-vaulter converts the kinetic energy of her \(9.0\,\mathrm{m/s}\) sprint entirely into height.

    1. Ignoring the pole and her own push, how high can her center of mass rise?
    2. Real vaulters clear bars higher than this estimate. Suggest one reason why.

    8.29 ★★ A spring of force constant \(800\,\mathrm{N/m}\) is compressed \(0.20\,\mathrm{m}\) and used to launch a \(0.50\,\mathrm{kg}\) ball horizontally off the edge of a frictionless table.

    1. Find the ball’s speed as it leaves the spring.
    2. If the table is \(1.0\,\mathrm{m}\) high, how far from the base of the table does the ball land? (Combine energy methods with projectile motion from Chapter 4.)

    8.30 ★★ [Graph-reading.] The graph shows the potential energy \(U(x)\) of a \(1.0\,\mathrm{kg}\) particle moving along the \(x\)-axis. The particle has a total mechanical energy of \(6.0\,\mathrm{J}\).

    Potential energy versus position for a 1 kg particle, with total energy of 6 J marked.Figure descriptionA graph of potential energy in joules versus position in meters for a one kilogram particle, with a horizontal dashed line marking the total mechanical energy of six joules.
    1. At a point where \(U = 2.0\,\mathrm{J}\), what is the particle’s kinetic energy and speed?
    2. What is the particle’s speed where \(U\) is a minimum (read the minimum value from the graph)?
    3. Explain what happens at a point where \(U = 6.0\,\mathrm{J}\). Between what two values of \(x\) is the particle confined?
    4. Identify the equilibrium position, and state whether it is stable or unstable. Give your reason in terms of the shape of the curve.

    8.31 ★ [Conceptual.] A roller-coaster car coasts (engine off) from the top of the first hill. Explain why no subsequent hill on a frictionless track can be taller than the first.

    8.32 ★★★ A \(2.0\,\mathrm{kg}\) block slides down a frictionless track from rest at height \(1.5\,\mathrm{m}\), then compresses a spring (\(k = 600\,\mathrm{N/m}\)) at the bottom.

    1. Find the block’s speed just before it reaches the spring.
    2. Find the maximum compression of the spring.

    8.33 ★★ A \(1200\,\mathrm{kg}\) car coasts in neutral down a \(6.0\,\mathrm{\%}\) grade (dropping \(6.0\,\mathrm{m}\) per \(100\,\mathrm{m}\) of road) and reaches a steady speed, with all the gravitational energy going to friction and drag. Over \(500\,\mathrm{m}\) of road, how much mechanical energy is dissipated?

    8.34 ★★ [Real-world: engineering.] Water flows over a dam, dropping \(45\,\mathrm{m}\) at a rate of \(1.5\times 10^{5}\,\mathrm{kg/s}\).

    1. How much gravitational potential energy is released per second?
    2. If a turbine converts \(85\,\mathrm{\%}\) of this into electrical power, what is the power output in megawatts?

    8.35 ★★★ A \(0.50\,\mathrm{kg}\) block is pressed against a spring (\(k = 400\,\mathrm{N/m}\)), compressing it \(0.15\,\mathrm{m}\), then released. It travels \(0.80\,\mathrm{m}\) along a rough horizontal surface (\(\mu_k = 0.25\)) before reaching the bottom of a frictionless ramp.

    1. How much energy does the spring store?
    2. How much mechanical energy is lost to friction before the ramp?
    3. How high up the ramp does the block rise?

    8.36 ★★★ [Conceptual.] A skier of mass \(m\) descends a frictionless slope of height \(h\), and a second skier of mass \(2m\) descends the same slope.

    1. Compare their speeds at the bottom.
    2. Compare their kinetic energies at the bottom.
    3. Explain why one comparison depends on mass and the other does not.

    8.37 ★ A \(0.060\,\mathrm{kg}\) tennis ball is dropped from a height of \(2.0\,\mathrm{m}\) and rebounds to a height of \(1.4\,\mathrm{m}\).

    1. How much mechanical energy was lost in the bounce?
    2. What fraction of the ball’s original mechanical energy is this?

    Challenge Problems

    8.38 ★★★ Return to the force \(F(x) = (12 - 3x^2)\,\mathrm{N}\) of Problem 7.32, acting on a \(1.5\,\mathrm{kg}\) object that starts from rest at the origin on a frictionless surface.

    1. Find the object’s speed at \(x = 1.0\,\mathrm{m}\).
    2. Find its maximum speed, and where it occurs.
    3. Find the position at which it momentarily comes to rest again.
    4. Is \(F(x)\) a conservative force? If so, find a potential-energy function \(U(x)\) for it, taking \(U(0) = 0\), and use it to check your answer to (c).

    8.39 ★★★ A spring of force constant \(500\,\mathrm{N/m}\) is compressed \(0.20\,\mathrm{m}\) and used to launch a \(3.0\,\mathrm{kg}\) block along a horizontal surface. The short launch region is frictionless, but beyond it the surface has \(\mu_k = 0.25\).

    1. How much elastic potential energy is stored in the compressed spring?
    2. How fast is the block moving as it leaves the spring?
    3. How far along the rough surface does the block slide before stopping?
    4. If instead the rough surface were only \(0.80\,\mathrm{m}\) long (and frictionless thereafter), what would the block’s final speed be?

    8.40 ★★★ [Real-world: transportation.] A \(1200\,\mathrm{kg}\) car accelerates from rest with its engine delivering a constant useful power of \(90\,\mathrm{kW}\). Neglect air resistance and friction.

    1. Using the work–kinetic energy theorem, show that the car’s speed grows as \(v(t) = \sqrt{2Pt/m}\).
    2. How long does it take to reach \(30\,\mathrm{m/s}\)?
    3. How far does the car travel in that time?
    4. Explain why the car’s acceleration decreases as it speeds up, even though the power is constant.

    8.41 ★★★ [Real-world: engineering.] An engineer tests a roller-coaster design on a scale model: a \(0.20\,\mathrm{kg}\) car runs on a smooth track and passes through a vertical circular loop of radius \(R = 0.40\,\mathrm{m}\). The car is released from rest at a height \(h\) above the bottom of the loop. (You will need uniform circular motion from Chapter 6.)

    1. What is the minimum speed the car must have at the top of the loop to stay in contact with the track?
    2. Find the minimum release height \(h_{\min}\) (in terms of \(R\), then numerically) needed to complete the loop.
    3. If the car is instead released from \(h = 1.5\,\mathrm{m}\), find its speed at the top of the loop and the normal force the track exerts on it there.

    8.42 ★★★ A \(1.5\,\mathrm{kg}\) block is launched up a rough incline (\(\theta = 25^\circ\)) with an initial speed of \(6.0\,\mathrm{m/s}\). The coefficients of friction are \(\mu_k = 0.30\) and \(\mu_s = 0.40\).

    1. How far up the incline does the block travel before momentarily stopping?
    2. Will the block then slide back down? Justify with the appropriate friction condition.
    3. If it slides back, how fast is it moving when it returns to its starting point?

    8.43 ★★★ A \(0.50\,\mathrm{kg}\) particle moves along the \(x\)-axis with potential energy \(U(x) = 2x^3 - 9x^2 + 12x\), where \(U\) is in joules and \(x\) in meters.

    1. Find the force \(F(x)\) acting on the particle.
    2. Locate the equilibrium positions.
    3. Classify each equilibrium as stable or unstable, with a reason.
    4. Sketch \(U(x)\) for \(0 \le x \le 3\) and mark both equilibria on your sketch.
    5. If the particle rests at the stable equilibrium, what minimum speed must it be given to escape the potential well, and in which direction must it be sent? Explain why the other direction will not do.

    This page titled 8.E: Conservation of Energy (Problems) was last modified on Thu, 12 Nov 2026 04:26:53 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Michael Ragsdale.