C.6: Breaking a Vector into Components

Physics: A Foundation for Scientists and Engineers · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    C.6: Breaking a Vector into Components

    Right-triangle trigonometry earns its keep in physics through vectors. Draw a vector \(\vec{A}\), then drop a line from its tip straight down to the \(x\)-axis. You have made a right triangle whose hypotenuse is the vector itself and whose legs are its components \(A_x\) and \(A_y\) (Figure C.3). If \(\theta\) is measured from the \(+x\) axis, \(A_x\) is the adjacent side and \(A_y\) the opposite side, so

    \[A_x = A\cos\theta, \qquad A_y = A\sin\theta,\]

    which are equations (3.1) and (3.2) of Chapter 3. Breaking a vector into components replaces one slanted arrow by two perpendicular ones that add up to it. Their great advantage is that \(x\)-parts and \(y\)-parts can be handled separately, by ordinary arithmetic.

    Vector A at angle theta above the x axis, forming a right triangle with its components.
    Figure C.3. A vector and its components form a right triangle. The vector is the hypotenuse; with \(\theta\) measured from the \(+x\) axis, the \(x\)-component is the adjacent side and the \(y\)-component is the opposite side.
    Figure descriptionA vector A drawn as an arrow from the origin up and to the right, at angle theta above the positive x-axis. A blue horizontal arrow along the x-axis from the origin to directly below the tip is labeled A sub x equals A cosine theta. A dashed vertical arrow from the end of A sub x up to the tip of A is labeled A sub y equals A sine theta. The vector and its two components form a right triangle with the vector as hypotenuse.
    Example C.8: Pulling a sled

    A rope pulls a sled with a force of \(25\,\mathrm{N}\) directed \(40^{\circ}\) above the horizontal. Find the horizontal and vertical components of the force.

    Solution

    The angle is measured from the horizontal, so the horizontal component is adjacent to it:

    \[F_x = F\cos\theta = (25\,\mathrm{N})\cos 40^\circ = 19\,\mathrm{N}, \qquad F_y = F\sin\theta = (25\,\mathrm{N})\sin 40^\circ = 16\,\mathrm{N}.\]

    Check: each component is smaller than \(25\,\mathrm{N}\), as legs of a right triangle must be, and \(\sqrt{19.15^2 + 16.07^2} = 25.0\,\mathrm{N}\). ✓

    When the angle is not measured from the \(x\)-axis

    The formulas \(A\cos\theta\) and \(A\sin\theta\) are not rules about \(x\) and \(y\); they are rules about adjacent and opposite. The component next to the angle always gets the cosine. If an angle is measured from the vertical, the \(y\)-component gets the cosine and the \(x\)-component the sine.

    The most important case is an object on an incline. It is convenient to use axes along the slope and perpendicular to it, and then the weight \(mg\) must be broken into components along those tilted axes. The angle between the weight and the perpendicular axis equals the incline angle \(\theta\), because both angles are what is left over when the same angle is subtracted from \(90^\circ\) (Figure C.4). The perpendicular component touches that angle and gets the cosine:

    \[\text{along the slope (downhill):}\quad mg\sin\theta, \qquad \text{perpendicular, into the surface:}\quad mg\cos\theta .\]

    Check with limits: on flat ground (\(\theta = 0\)) the weight pushes entirely into the surface, \(mg\cos 0 = mg\), with no downhill pull. On a vertical wall (\(\theta = 90^\circ\)) the weight is entirely along the “slope,” \(mg\sin 90^\circ = mg\). If you ever swap sine and cosine on an incline, this check will catch it.

    A ramp rising to the right at angle theta above the horizontal ground, with a block resting on it.
    Figure C.4. Components of the weight on an incline of angle \(\theta\). The weight \(mg\) is the hypotenuse. The angle between the weight and the perpendicular to the surface equals \(\theta\), so the perpendicular component (adjacent to \(\theta\)) is \(mg\cos\theta\) and the component down the slope (opposite \(\theta\)) is \(mg\sin\theta\).
    Figure descriptionA ramp rising to the right at angle theta above the horizontal ground, with a block resting on it. From the center of the block, a red arrow points straight down, labeled m g. Two blue arrows from the same point show its components: one points down the slope, labeled m g sine theta, and one points perpendicular into the ramp surface, labeled m g cosine theta. Dashed lines complete the right triangle, with the weight as its hypotenuse. A small arc marks the angle theta between the weight and the perpendicular component, equal to the ramp angle, which is also marked at the bottom of the ramp.
    Checkpoint C.4

    A \(10\,\mathrm{m}\) displacement points \(30^\circ\) to the right of the \(+y\) axis (that is, \(30^\circ\) east of north). Find its \(x\)- and \(y\)-components. Which one gets the cosine, and why?

    Answers to Checkpoints

    Checkpoint C.4. The angle is measured from the \(y\)-axis, so the \(y\)-component is adjacent to it and gets the cosine: \(A_y = (10\,\mathrm{m})\cos 30^\circ = 8.7\,\mathrm{m}\) and \(A_x = (10\,\mathrm{m})\sin 30^\circ = 5.0\,\mathrm{m}\).


    This page titled C.6: Breaking a Vector into Components was last modified on Thu, 12 Nov 2026 04:27:18 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Michael Ragsdale.