D.E: Motivation of Calculus for Physics Students (Practice Problems)

Physics: A Foundation for Scientists and Engineers · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    D.E: Motivation of Calculus for Physics Students (Practice Problems)

    Answers follow the problems.

    Derivatives as Rates

    D.1 ★ An object’s position is \(x(t) = (4.0\,\mathrm{m/s^3})\,t^3 - (2.0\,\mathrm{m/s})\,t\). Find its velocity and acceleration at \(t = 2.0\,\mathrm{s}\).

    D.2 ★ A cup of coffee cools according to \(T(t) = 20\,^{\circ}\mathrm{C} + (70\,^{\circ}\mathrm{C})\,e^{-t/(10\ \mathrm{min})}\). (a) What is \(dT/dt\), and what are its units? (b) How fast is the coffee cooling at \(t = 0\) and at \(t = 10\,\mathrm{min}\)? (c) Explain from the shape of the graph why the second rate is smaller.

    D.3 ★★ Following the table in Section D.1, compute the average velocity of \(x(t) = (5.0\,\mathrm{m/s^2})\,t^2\) between \(t = 1.0\,\mathrm{s}\) and \(t = 1.0\,\mathrm{s} + \Delta t\) for \(\Delta t = 0.1\), \(0.01\), and \(0.001\,\mathrm{s}\). What value do the averages approach, and does it agree with \(dx/dt = 10\,t\)?

    Integrals as Sums and Areas

    D.4 ★ An object’s velocity is \(v(t) = (2.0\,\mathrm{m/s^3})\,t^2\). (a) Estimate its displacement from \(t = 0\) to \(t = 3.0\,\mathrm{s}\) using three rectangles of width \(1.0\,\mathrm{s}\), each with its height taken at its left edge. (b) Find the exact displacement by integrating. (c) Explain why your estimate is too small.

    D.5 ★ Find the area under one arch of the curve \(y = \sin x\), from \(x = 0\) to \(x = \pi\). Before integrating, estimate the answer: the arch fits inside a rectangle of width \(\pi\) and height \(1\), so the area must be less than \(\pi\).

    D.6 ★ A force that varies with position, \(F(x) = (3.0\,\mathrm{N/m^2})\,x^2\), pushes an object from \(x = 0\) to \(x = 2.0\,\mathrm{m}\). How much work does it do?

    D.7 ★★ The current in a discharging circuit is \(I(t) = I_0\,e^{-t/\tau}\). How much charge flows past a point from \(t = 0\) until the current has died away completely (\(t \to \infty\))? Give the answer in terms of \(I_0\) and \(\tau\), and check its units.

    Slicing Physical Objects

    D.8 ★ A rod lies along the \(x\)-axis from \(x = 0\) to \(x = L\) and carries charge with linear density \(\lambda(x) = \lambda_0\,x^2/L^2\). Find the total charge on the rod. Then check your answer: should it be more or less than \(\tfrac{1}{2}\lambda_0 L\)?

    D.9 ★★ A bowl is a hemisphere of radius \(R\). Find its volume by slicing it into thin horizontal disks of thickness \(dz\). (Hint: a disk a height \(z\) above the flat face has radius \(r = \sqrt{R^2 - z^2}\).) Check your answer against the volume of a whole sphere.

    D.10 ★★ A solid sphere of radius \(R\) has a charge density that grows linearly from zero at the center, \(\rho(r) = \rho_0\,r/R\). Slice it into thin spherical shells and find its total charge. Express your answer as a uniform-sphere result with an effective average density, and compare that average to \(\rho_0\).

    D.11 ★★★ A uniform thin rod has mass \(M\) and length \(L\). Its moment of inertia about an axis is \(I = \int r^2\,dm\), where \(r\) is each piece’s distance from the axis (equation (10.10)). (a) Slice the rod into pieces of length \(dx\) and find \(I\) about an axis through one end. (b) Repeat for an axis through the center. (c) Explain physically why the two answers differ.

    Answers to Practice Problems

    D.1 \(v = 12t^2 - 2 = 46\,\mathrm{m/s}\); \(a = 24t = 48\,\mathrm{m/s^2}\).

    D.2 (a) \(dT/dt = -(7.0\,\mathrm{{}^{\circ}\mathrm{C}/min})\,e^{-t/(10\ \mathrm{min})}\), in \(\mathrm{{}^{\circ}\mathrm{C}/min}\). (b) \(-7.0\,\mathrm{{}^{\circ}\mathrm{C}/min}\) at \(t = 0\); \(-2.6\,\mathrm{{}^{\circ}\mathrm{C}/min}\) at \(t = 10\,\mathrm{min}\). (c) The graph flattens as the coffee approaches room temperature, so its slope shrinks.

    D.3 \(10.5\,\mathrm{m/s}\), \(10.05\,\mathrm{m/s}\), \(10.005\,\mathrm{m/s}\); they approach \(10\,\mathrm{m/s} = 10(1.0)\), in agreement.

    D.4 (a) \((0 + 2.0 + 8.0)(1.0) = 10\,\mathrm{m}\). (b) \(\tfrac{2.0}{3}(3.0)^3 = 18\,\mathrm{m}\). (c) The velocity increases throughout, so each left-edge height is the smallest value in its interval.

    D.5 \(\bigl[-\cos x\bigr]_0^\pi = 2\), about \(64\%\) of the enclosing rectangle.

    D.6 \(W = \tfrac{3.0}{3}(2.0)^3 = 8.0\,\mathrm{J}\).

    D.7 \(Q = I_0\,\tau\); amperes times seconds is coulombs.

    D.8 \(Q = \tfrac{1}{3}\lambda_0 L\); less than \(\tfrac{1}{2}\lambda_0 L\), because the density is small over most of the rod and large only near \(x = L\).

    D.9 \(V = \int_0^R \pi(R^2 - z^2)\,dz = \tfrac{2}{3}\pi R^3\), half of \(\tfrac{4}{3}\pi R^3\).

    D.10 \(Q = \pi\rho_0 R^3 = \tfrac{3}{4}\rho_0\cdot\tfrac{4}{3}\pi R^3\); the effective average density is \(\tfrac{3}{4}\rho_0\), between \(0\) and \(\rho_0\) and weighted toward the outside, where most of the volume is.

    D.11 Each piece has mass \(dm = (M/L)\,dx\). (a) \(I = \int_0^L x^2\,(M/L)\,dx = \tfrac{1}{3}ML^2\). (b) \(I = \int_{-L/2}^{L/2} x^2\,(M/L)\,dx = \tfrac{1}{12}ML^2\). (c) About the center, no mass is farther than \(L/2\) from the axis, and because \(r\) is squared, the distant mass dominates.


    This page titled D.E: Motivation of Calculus for Physics Students (Practice Problems) was last modified on Thu, 12 Nov 2026 04:27:12 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Michael Ragsdale.