Opening the book…
4.3 Torque and Twirl
The Angular Momentum Principle is one of the three key dynamics principles used in the study of Mechanics. This principle is represented by the equation:
\[ \Delta \vec{L}_{\text{system}}=\sum \vec{J}_L \]
“The total change in angular momentum of a system” = “The net angular impulse acting on the system”
The choice of a system is arbitrary in that any choice can be made and the physics still works. The physics equations will be different (but still accurate) for different choices of system, so it is necessary to identify your chosen system in every problem. We will now begin to explore open angular momentum systems where \( \sum \vec{J}_L \ne 0 \) and angular momentum is not conserved.
Angular Momentum (and other angular quantities) are different from energy and linear momentum in that they depend on the chosen origin, pivot point, or rotation axis.
4.3.1 Torque
Model

Explore
- Fill in the force/torque story below:
There are ______ forces acting on the wheel. ______ forces do not apply a torque and ______ forces do apply a torque. Of the forces that apply torque, ______ apply it in a clockwise direction \((-\hat{z})\) and ______ apply torque in the counterclockwise \((+\hat{z})\) direction.
- Does every torque come from a non-zero force?
- Examine the force-torque pairs. Does the torque point in the same direction as the force? If not, how does the direction of torque compare to force?
Critical Thinking & Concept Invention
- In what circumstances does a Force result in a Torque? Pay attention to the direction of those Forces.
- In what circumstances does a Force not result in a Torque? Pay attention to the direction of those Forces.
- There is one Force without a torque label. Does it cause a torque? If so, in what direction? Add an appropriate label to the diagram.
Summary
Torque can be thought of as a Rotational Force that can cause an object to change its angular momentum. Torque is given by the equation:
\[ \vec{\tau}\equiv\vec{r}\times\vec{F} \]
The magnitude of this expression can be represented as:
\[ \tau=r_{\perp}F \]
or
\[ \tau=rF_{\perp} \]
or
\[ \tau=rF\sin(\theta) \]
Forces that point in a direction that lines up with (or directly opposite of) the pivot point or rotational axis do not result in a torque. Forces that have a tangential component with respect to the pivot point cause a torque.
The best way to determine this is to draw an extension of the force vector forwards and backwards. If that extension goes through the pivot point, then the force does not cause a torque.
Extended Force Diagrams draw the objects as extended bodies and include force vectors at their point of contact with the object. The force of gravity is drawn from the center of mass of the object.
4.3.2 Angular Impulse and Angular Momentum
Model

Explore
- How many Forces act on the object? What direction do those forces point?
- How many Torques act on the object? What direction do those torques point?
- Is the initial angular velocity of the wheel clockwise or counterclockwise? Use the Right Hand Rule. What direction (\(+/-x\), \(+/-y\), \(+/-z\)) is the initial angular velocity vector?
- Based on your response above, what direction (\(+/-x\), \(+/-y\), \(+/-z\)) is the initial angular momentum vector?
- Compare the direction of \[ \vec{\tau} \] and \[ \vec{L}_i \] .
Critical Thinking & Concept Invention
- Is \[ \vec{\tau} \] most related to \[ \vec{L}_i \] , \[ \Delta \vec{L} \] , or \[ \vec{L}_f \] ? Hint: Compare the direction of the different vectors.
- What is different between the angular momentum charts?
- Construct an equation that relates \[ \Delta \vec{L} \] and \[ \vec{\tau} \] .
Summary
Torque \[ (\vec{\tau}) \] is the rate that angular momentum \[ (\vec{L}) \] changes:
\[ \vec{\tau}=\frac{\Delta\vec{L}}{\Delta t} \]
Angular Impulse \[ (\vec{J}_L) \] is the total amount that the angular momentum of an object changes over a time interval.
Angular Impulse is sometimes called Twirl and has a similar equation structure to the Impulse-Momentum Theorem:
\[ \Delta \vec{L}_{\text{system}}=\sum \vec{J}_L \]
The Angular Impulse on the system depends on both the torque and the time interval over which that torque is applied.
This is represented mathematically as:
\[ \vec{J}_L=\vec{\tau}_{\text{avg}}\Delta t \]
4.3.3 Net Torque
Model
A solid disk of mass \(M\) and radius \(R\) initially begins at rest. Two forces act on the wheel as shown, one at the edge of the wheel and one halfway between the center of the wheel and the edge.
\[ \vec{F}_1 \] has a magnitude \[ F \] .

Explore
- Compare the following for \[ \vec{F}_1 \] and \[ \vec{F}_2 \] :
- Magnitude
- Direction
- Compare the following for \[ \vec{r}_1 \] and \[ \vec{r}_2 \] :
- Magnitude
- Direction
- For each force, what is the angle between \[ \vec{r} \] and \[ \vec{F} \] ?
Critical Thinking & Concept Invention
- Assume these forces are constant and are applied for 5 seconds. What will \[ \Delta \vec{p}_{\text{wheel}} \] be after those 5 seconds? Explain your reasoning.
- Compare the following for each torque:
- Magnitude
- Direction
- Identify the torque from each Force as a column vector, then add them up to find the net torque. Write in the appropriate mathematical operations \((+,-,\times,\div,=)\).
\[\tau_1\] \[\tau_2\] \[\Sigma \tau\] - Assume the forces are constant and applied for 5 seconds. Find \[ \Delta\vec{L}_{\text{wheel}} \] . Report it as a column vector.
- Why is there a change in angular momentum but not a change in linear momentum when both relate to the external forces that act on the wheel?
Summary
Where there is more than one torque acting on an object, the change in angular momentum is determined by the net angular impulse (Twirl):
\[ \Delta\vec{L}=\sum\vec{J}_L \]
The net angular impulse is a sum of the angular impulse from each torque:
\[ \sum\vec{J}_L=\sum_i \vec{\tau}_{i,\text{avg}}\Delta t_i \]
If the torques are all applied over the same time interval, you can take a single integral of the net torque:
\[ \sum\vec{J}_L=\sum\vec{\tau}_{\text{avg}}\Delta t \]
Apply
- Two construction workers carry a heavy beam of mass \(M\). The forces they apply will align with the dashed line at each worker (so either up or down). The dot on the beam is the middle of the beam. The beam does not change its linear motion \[ (\Delta\vec{p}=0) \] or its rotational motion \[ (\Delta\vec{L}=0) \] . Your instructor will assign you a specific point to act as the pivot point.
- Draw force vectors from each person and be sure they are consistent with the description of motion.
- Draw the moment arm vectors to each force.
- Determine the direction of the torque from each force and write an equation for the magnitude of each torque.
- Be sure they are consistent with the description of motion.

- One construction worker carries a heavy beam of mass \(M\) that is also held up by a cable at the angle shown. The forces the worker and cable apply will align with the dashed lines at each object. The dot on the beam is the middle of the beam. The beam does not change its linear motion \[ (\Delta\vec{p}=0) \] or its rotational motion \[ (\Delta\vec{L}=0) \] . Your instructor will assign you a specific point to act as the pivot point.
- Draw force vectors from the person and cable.
- Be sure they are consistent with the description of motion.
- Draw the moment arm vectors to each force.
- Determine the direction of the torque from each force and write an equation for the magnitude of each torque.
- Be sure they are consistent with the description of motion.

This page titled 4.3: Torque and Twirl was last modified on Thu, 29 Oct 2026 17:42:49 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Andrew Totah-McCarty.
The book could not be loaded just now.