Opening the book…
Hemiplegic Partial-Assist Transfer
- Position wheelchair for transfer.
- Once resident is sitting, put gait belt snugly around resident’s waist.
- Position resident at edge of bed with his/her feet on the floor.
|
1. Caregiver grasps resident’s weak hand (palm to palm) and the front of the gait belt while the caregiver’s other hand grasps the gait belt in back. Block the resident’s weak knee with the caregiver’s knee. |
|
|
2. Assist the resident to stand and reach for the surface she or he is transferring to. |
3. Assist the resident to sit down with control. |
Max Assist or Dependent Transfers
This is a transfer done with a rehab resident in a “no-lift” facility. You will most likely use a mechanical lift that allows for weight bearing for non-rehab residents.
Start with both your knees bracing resident’s weaker knee. Your knees should be in front of and to the sides of resident’s knee to block. When possible you will want to transfer to the resident’s stronger side.
Basic Transfer Rules
- Always take your time. Accidents happen when you hurry.
- Plan your move:
- Position your feet
- Position your knees
- Position your hands
- Face the surface you are transferring to
- Always explain the procedure to the resident as you progress.
- Always get assistance if you are not sure you can safely perform the transfer alone.
- Use your weight; let your legs do the work, not your back.

Do not attempt this transfer until you have had thorough one-on-one instruction by, and practice with, a Therapist or Nurse.
Blocking the knee is a must!
Brace the resident’s weaker knee with your knees. Keep your spine in normal alignment as you assist the resident to stand. This allows the resident to bear weight through a weakened leg during the transfer.
When the resident stands on his/her leg with a caregiver blocking at the knee, the resident is supporting his/her body weight instead of the caregiver supporting the body weight of the resident.
Hemiplegic One-Person Dependent Transfer
This is a transfer done with a rehab resident in a “no-lift” facility.
|
1. Block both of the resident’s knees with the caregiver’s knees. Cross the resident’s arms in front of the body. Closely hug the resident, grasp the back of the gait belt with both hands and look toward the surface you are transferring to. |
2. Assist the resident to stand and to bear as much weight as possible on his/her legs. |
3. Step/pivot to the chair or other surface you are transferring to. Avoid twisting and lower the resident to the seated position. |
Blocking the knee is a must!
- Brace the resident’s weaker knee with your knees.
- Keep your spine in normal alignment as you assist the resident to stand.
This allows the resident to bear weight through a weakened leg during the transfer.
Two-Person Dependent Transfer
This is a technique for a rehab resident in a “no-lift” facility.
|
1. Both caregivers grasp the resident’s hands (palm to palm) and the gait belt in front, as well as grasping the gait belt at the resident’s back. Both caregivers block the resident’s knees (“mirror-image” of caregivers). |
2. Assist the resident to stand and to bear as much weight as possible on his/her legs. |
3. Step/pivot toward the surface you are transferring to and lower the resident into a seated position. |
This page titled 3.7.3.2: Assist and Dependent Transfers was last modified on Tue, 27 Oct 2026 23:22:31 GMT and is shared under a Public Domain license and was authored, remixed, and/or curated by .
The book could not be loaded just now.








