Opening the book…
Positioning Devices
- Laptray: A useful surface assists arm positioning and trunk control. This can be considered a restraint – check with Nursing or Therapist.
- Pommel cushion: Keeps hip from inwardly rotating. This can be considered a restraint – check with Nursing or Therapist.
- Seat cushion: Helps prevent pressure ulcers.
- Head support: Positions head erect. Used in reclining wheelchairs.
- Lateral support: Attaches to the wheelchair to align trunk.
- Hemi sling: Supports affected arm to prevent subluxation.
- Arm trough: Positions the hemiplegic shoulder and arm to prevent injury and a painful shoulder.
- Lap buddy: Soft, padded cushion that fits above resident’s knees through arm rests to provide upper body support and prevent sliding. This can be considered a restraint – check with Nursing or Therapist.
Bed Positioning for Total Hip Replacement (THR)

Correct
Keep pillows between the legs when he/she is lying on one side to prevent the hip from rotating inward.

Correct
Do keep a pillow between the legs when lying on his/her back.
Incorrect
When the resident is supine, do not permit him/her to rotate the hip inwardly (do not point toes inward).
Turning in Bed with a Pillow Between Knees
Purpose:
To provide comfort and prevent skin breakdown at pressure areas at ankles and knees.

Move resident toward the center of the bed so he/she is not too close to the edge. Use a friction-reducing draw sheet when available. Position the pillow between the knees as shown above.

Now have resident grasp the nearest corner of the pillow and turn to his/her side.

Place a “towel roll” or small pillow just under the corner of the pillow as shown to ensure that the resident’s leg does not slip forward and down while sleeping. Make sure there is no pressure from ankles or feet touching each other.
Protecting the Hemiplegic Shoulder
What all members of the team – including family – should avoid:
- Never pull on the hemiplegic arm to help change position or sit up.
- Do not hold onto the hemiplegic arm to support the resident in sitting, standing or walking.
- Avoid lifting the resident or repositioning in the wheelchair by placing your arms under the resident’s arms.
Positioning
Tone can be increased or decreased by positioning
When spasticity is a problem, improper positioning can cause pain or discomfort, which increases spasticity.
Improper positioning
- Pain
- Discomfort
- Decreased function
- Increased spasticity
Proper positioning
- Comfort
- Increased function
- Decreased spasticity
Conditions that increase spasticity
- Emotional upset
- Pain
- Discomfort
- Attempting tasks that are too difficult or that cause straining:
- Rolling over
- Moving from sitting to standing
- Reaching for an object away from the body
- Picking up small objects
- Shifting sitting position
- Bowel movement
- Poor positioning
- Loud noises
- Sneezing, coughing, laughing
- Illness (cold, flu, urinary tract infection, pneumonia)
Adult Hemiplegic Positioning While Lying Supine
Purpose
To encourage relaxation, prevent (or decrease) pain, and prevent (or decrease) tightness.
Instructions
- Place a flat pillow under head with the head straight in the middle or turned slightly toward affected side.
- Body is straight in bed, not bent to either side.
- Small pillow should be placed completely under affected shoulder blade.
- Affected arm is supported by pillow out to the side. A small towel roll may be placed in the hand to support wrist (not for squeezing).
- Small pillow is placed under affected hip.
- Pillow to support leg in mid-positon and to minimize external rotation.
- May use pillow under lower leg to float heels.
Desired response:
Relaxation and control of tightness
Undesired response:
Becoming stiff and uncomfortable
Adult Hemiplegic Positioning While Lying on Unaffected Side
Purpose
To encourage relaxation, prevent (or decrease) pain, and prevent (or decrease) tightness.
Instructions
- Lie on unaffected side with affected side rolled forward slightly.
- Place flat pillow under head.
- Place one or two pillows under affected arm to support it. Affected shoulder is slightly forward and hand is supported.
- Place a pillow under the affected leg for support, with hip slightly forward, hip and knee bent.
- A pillow, if necessary, can be placed behind back to prevent rolling backwards.
- No objects should be placed against the bottom of the foot.
Desired response:
Relaxation and control of tightness
Undesired response:
Becoming stiff and uncomfortable
Adult Hemiplegic Positioning While Lying on Affected Side
Purpose
To encourage relaxation, prevent (or decrease) pain, prevent (or decrease) tightness and increase sensory input.
Instructions
- Place a flat pillow under head.
- Lie on affected side with affected shoulder forward.
- Palm of hand should be turned up with entire arm supported.
- Affected hip should be straight with knee slightly bent.
- Pillow should be placed under unaffected leg for support.
Options
- Both hips and knees can be bent with flat pillow in between them.
- Clasp hands with affected thumb on top, pointing to head of bed.
Desired response:
Relaxation and control of tightness
Undesired response:
Becoming stiff and uncomfortable
Adult Hemiplegic Positioning While Sitting in Bed
Purpose
To encourage relaxation, prevent (or decrease) pain, and prevent (or decrease) tightness.
Instructions
- Make sure resident is positioned toward the top of the bed so that bending occurs in the correct places. Use trapeze or friction-reducing draw sheet to re-position.
- Sit in bed as upright as possible, with head and body in line.
- Body weight should be even on both buttocks. Do not lean to either side.
- Affected arm is slightly forward and supported at side by pillows and from behind at shoulder blade.
- Hand should be flat on pillow.
- Small towel roll should be under affected knee.
- Heels can be floated as necessary.
Desired response:
Relaxation and control of tightness
Undesired response:
Becoming stiff and uncomfortable
Adult Hemiplegic Positioning While Sitting in a Chair/Wheelchair
Purpose
To encourage relaxation, prevent or decrease pain and/or tightness and provide pressure relief.
Instructions
- Sit with buttocks completely back in the chair. Hips and knees are at right angles, feet flat on floor or footrests.
- Head and body are in line, weight distributed evenly on both buttocks. Do not lean to either side.
- Affected arm is supported by table, lap tray, trough or pillows (per Therapist instructions).
- Wrist and hand may be supported by hand roll or splint (per Therapist instructions).
- Chair cushion should be used as recommended (per Therapist instructions).
- Use a positioning device as needed to prevent slipping or sliding out of the chair seat (e.g., dycem or one-way glide sheet).
Desired response:
Relaxation and control of tightness
Undesired response:
Becoming stiff and uncomfortable
Bed Mobility
From supine to side-lying to sitting
To get a resident to the edge of a bed
- Brake or brace bed and prepare wheelchair for transfer.
- Log-roll resident onto his/her side. Use a friction-reducing draw sheet as needed.
- Be sure your spine is in normal alignment. Watch your body mechanics.

This page titled 3.7.2: Positioning was last modified on Tue, 27 Oct 2026 23:22:28 GMT and is shared under a Public Domain license and was authored, remixed, and/or curated by staff.
The book could not be loaded just now.