Chapter 8: Lighting Plots and Recces

Lighting for Digital Film · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    Chapter 8: Lighting Plots and Recces

    To help the gaffer and lighting crew visualize the lighting design on set, a light plot or lighting diagram is utilized. This enables them to set up and adjust lighting for each shot in a film and is an integral part of pre-production and production. There will be several examples of lighting plots in this chapter that contain floor plans, types of lights, positions and directions, intensity, and accessories used. The importance of location practice shots with ensuing light plots during the pre-production process must be emphasized (see Recce further in this chapter). There are several useful weblinks for information for New York State, including regional film offices, prospectors, NYC permits and the government Film Office, and an NYC Location Library.

    Lighting Plots

    Low-key interior scene with a masked figure seated beside a table, illuminated by cool directional light; selective highlights on the face, flowers, and lantern demonstrate controlled placement of key and accent lights.
    Figure 8.1. Mask and Film Noir

    Once a shot list and storyboard have been created, the director of photography will design a lighting plot for every shot. As the main decision-maker for lighting, the DOP determines the types of light fixtures, how many, their placement in the shot, intensity, color temperature, and temperature of lights to achieve the mood and aesthetic that the film’s director has envisioned. The diagram will show, at the very minimum:

    • where the talent is placed
    • what types of lights are to be used
    • where light fixtures will be situated
    • what accessories are used on each light source
    • backdrops, such as doors, walls, windows, etc.
    • specific information, e.g., dolly or jib placement and direction

    This blueprint efficiently communicates all lighting information to your crew and sets a clear plan in motion. Ideally, you should test the setups during pre-production planning. Having your lighting plan in place is more efficient and saves a lot of time, hassle, and money. This will also allow you to foresee any potential difficulties that can be overcome ahead of time.

    A Basic Light Plot. The top corner shows one of the lights coming downwards. It is labeled Key 1K CTB. In the center is an oval depicting what is being lit. In the bottom corner from the oval is another light shape that reads Kicker 150K CTB. In the oval's other bottom corner, on the side closer to Key 1K CTB by an x-axis standpoint, it is a third light shape that reads Fill 300K CTB. In the same bottom corner from the oval, but above the light shape and the closest to the one up top, is more of a square shape with rectangles coming off of its ends toward the general direction of the oval to represent light coming out of it, as well. It is labeled Medium Angle MS.
    Figure 8.2. Basic light plot example.

    There are different tools you can use to draw up your lighting plots, such as simple pencil and paper, whiteboards, and downloadable apps for the web and cell phone. Although some free apps can have a few limitations, paid online software can also have limited capabilities, customization, and convenience. The lighting plot above was created in Microsoft Word.

    There is a free, open-source software that you can try called Drawio. Although not created for filmmakers, it is easy to use and customizable. It enables users to easily drag and drop items onto a lighting layout, as well as import inspiration images to help the crew see your vision.

    Black-and-white scene of a person seated at a table holding a handgun; hard side lighting creates deep shadows and high contrast, illustrating the visual result of a planned film noir lighting setup.
    Figure 8.3. Reference photo for a light plot.

    Figure 8.4 shows a template I used as an example for a film noir shot.

    Lighting plot diagram for a film noir scene, showing camera position, talent placement, lighting instruments, modifiers, and set elements arranged in an overhead floor plan with a symbol legend.
    Figure 8.4. Light plot example using draw.io.

    You can choose any image as the reference photo to assist you and your team in gaining a good sense of your preferred mood, character, etc. In the lighting plot in figure 8.4, I used a film noir still that was shot in our studio. You can see the legend that shows what elements were used inside the frame. Under the camera information, I have included the type of camera, lens, and exposure information. You can include any information you want, such as diffusers, cookies, etc. Colors can also be changed to your preference.

    More sample lighting plot templates are found in Student Resources at the end of the chapter.

    Reconnaissance: The Recce

    To conduct test shots, it is particularly important to see your location in person, in other words, conduct a recce. Coming from the French verb reconnaître, to recognize, a recce is a primary visit to a location to assess its viability for filming. In the USA it is more commonly called a site survey. The recce should gather as much information as possible and should include light meter readings, photos, and measurements of the location. The more information gathered, the better. Usually the location scouts, under the supervision of the location manager, perform the initial recces.

    Consider these main steps to securing a location:

    • Have a concise list of locations created by the producer/director/1st AD/production manager.
    • Have department heads recce chosen shortlisted locations.
    • Book the site. The location manager secures film permits/notifications, e.g., from residents, police, and city officials.
    • Notify postponements due to issues, such as weather.
    • Obtain insurance: have it for loss of life and limb/damage/filming time.

    Many states have a location database for filmmakers to access. The NYC mayor’s office of Media and Entertainment has the New York Location Library online database, which can be found on their website. For New York State, you can also search data at Explore New York State.

    Group unloading equipment and supplies from a vehicle at a rural roadside location; gear is spread out for evaluating and preparing a potential filming site during a location scout.
    Figure 8.5. This crew is gearing up for a site survey.

    Before you scout a location, be prepared:

    • Wear durable shoes.
    • Bring adequate clothing for the weather.
    • Bring a big bag!
    • Bring a notebook and pen/pencil.
    • Bring a camera for still photos of the location.
    • Bring your fully-charged cell phone!

    The shots in figures 8.6 and 8.7 are from a drone that students used on their recce. Their location was several hours away, and time was of the essence. This photo showed the DOP where the lake and the trees were in relation to the empty ground. They used the drone to photograph several angles.

    Aerial view looking across a pond toward open fields and rolling hills; the elevated perspective documents terrain, access, and surrounding landscape for location planning and shot design.
    Figure 8.6. Drone recce still.
    Aerial view of an open field bordered by trees, a pond, and rolling hills; the elevated perspective documents terrain, sightlines, and access routes for location scouting and production planning.
    Figure 8.7. A second drone recce still from another angle.

    The following should be gathered for initial information via your contact:

    • type of material being shot
    • time of shooting
    • potential location of shooting
    • map/directions that lead to contact person
    • principal contact person:
      • address
      • phone number
      • e-mail address
      • permits
    Close-up of a folder labeled “TOP SECRET” in red lettering; production props and costume details are documented during a recce to support shot planning and lighting design.
    Figure 8.8.

    Below is some information to keep in mind about gathering at the location:

    • maps/GPS/compass coordinates
    • directions to location
    • photos of location in aesthetic form
    • reverse photos showing where the camera would be in relation to cast/crew/equipment
    • sketches and diagrams of location and surrounding areas
    • floor plans
    • access stairwells and entry and exit doors for cast/crew/equipment/vehicles
    • dimensions: rooms, field acres, etc.
    Wide outdoor shot of a large group of people in period military uniforms gathered on a grassy field; the image illustrates a complex exterior location requiring planning for staging, camera positions, and natural light conditions.
    Figure 8.9. Reenactment still on location.

    Recce/Site Survey Guiding Questions

    Before you go anywhere, especially out of the country, answer the questions below:

    • Do I need special permits/visas/vaccinations?
    • What are the transportation links and issues, i.e., planes, trains, and automobiles, and on horse, camel, or foot?
    • What accommodations are available?
    • Is a local guide needed?
    • Should I carry cash for under-the-counter finance (occasionally, a little financial tip can go a long way)?
    • Do I have established emergency contacts and evacuation routes?
    Person seated at a kitchen table reading a newspaper in a room lit by window light filtered through blinds; the location contains practical fixtures, furniture, and decor that would be evaluated during a recce for lighting, camera placement, and scene coverage.
    Figure 8.10. Gather as much information as possible.

    Consider these details about your camera:

    • camera placement
    • tripod size (can it fit?)
    • camera mounting devices or platforms (are there any?)
    • lenses (are there any?)
    • objects in interference with shots (if there are some, how can the situation be corrected?)
    • battery charging station (is there one, and is there AC access in it?)

    Answer the following questions about your lights:

    • Can spaces accommodate all the lights?
    • What types of fixtures will be used?
    • What placements will be used?
    • How many will be used?
    • Will light stands or particular light holders be used?Will light stands or particular light holders be used?
    • Are lighting accessories needed?
    • Will there be problems regarding mixing indoor and outdoor lighting?
    • Will the sun’s position at various times affect shooting?
    • What kinds of shadow problems will there be and are there now?
    Large group seated around a long dining table on a set, with place settings, food, and a central candle; the scene illustrates the need to assess space requirements, power distribution, catering logistics, and lighting placement during preproduction planning.
    Figure 8.11.

    Answer the following questions about your power:

    • Will power be available, or is a generator needed?
    • What is the voltage in the location? Remember, not all countries use 110V.
    • Where are the electrical circuits, how many are there, and what is their condition?
    • Where is the circuit breaker?
    • Who can be contacted if a circuit blows?
    • Which circuits can be used, and how many watts can run on them?
    • What power outlets can be used?
    • How many extension cords will be needed?

    Consider the following about your audio:

    • background noise interference, if any
    • interferences corrections and how
    • types of microphones that are used
    • placement of microphones and cables
    • microphone holders (e.g., will stands be needed instead?)
    • mic cable and how much is needed
    Person examining illuminated X-ray images on a medical lightbox; the bright viewing panel demonstrates how practical light sources within a location can affect exposure, contrast, and lighting design considerations.
    Figure 8.12.

    Do not forget the following:

    • waste production and removal!
    • weather conditions
    • safety
    • where to park and unload
    • whether or not passes are needed to enter a location
    • location access during off hours/seasons (e.g., are you allowed to access it at particular times?)
    • food required and where catering can be set up
    • storage of equipment/belongings and where to store them

    Make sure you conduct a thorough inspection of all of your locations during your recce. Gather all the information you can regarding contact details, permits, parking and access, and detailed plans of each site, including the dimensions, equipment needed, power availability, amount of waste, and weather conditions. Take pictures, lots of them. Above all, check the location for any safety concerns, and follow your SOS protocols so your cast and crew will have a safe shoot.

    Close up

    More NY Film Location Resources

    Chapter Review

    Exercise

    Look at this shot below, taken on a Navy ship. Conduct the recce as if you were scouting this location. Think about how you would do this. Using all of the points mentioned in this chapter, prepare a detailed recce report that you will send to a director and a producer.

    Interior of a naval vessel with crew members standing beside a large metal bulkhead; overhead industrial fixtures create pools of directional light, deep shadows, and reflections on painted metal surfaces, illustrating the importance of evaluating existing practical lighting during a location recce.
    Figure 8.13.

    Exercise

    Chapter 8 Student Resources

    Resource Title Link to document Alternate format (if applicable)
    Basic Light Plot Template Google Doc (this link will prompt you to make a copy) Google Doc (view only)
    Lighting Plot Example PDF  

    Media Attributions

    • Mask and Film Noir © Ros Smith
    • Basic Light Plot © Ros Smith
    • Film Noir for Light Plot © Roslin Smith
    • Template Lighting Plot, Draw.io Photo © Roslin Smith
    • Recce prep © Ros Smith
    • Drone Recce Still © Ben Anderson/Ros Smith
    • Drone 2 © Ben Anderson/Ros Smith
    • Top secret © Ros Smith
    • British © Ros Smith
    • Info gathering © Ros Smith
    • Dinner scene © Ros Smith
    • X-ray © Ros Smith
    • Navy ship © Ros Smith

    This page titled Chapter 8: Lighting Plots and Recces was last modified on Mon, 26 Oct 2026 17:17:03 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Roslin Smith via source content that was edited to the style and standards of the LibreTexts platform.