6.2: Points Made in the Case Study

Beyond Lean: Simulation in Practice · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY-NC-SA, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    6.2: Points Made in the Case Study

    This case shows how a new workstation, that is a part of a lean transformation, can be studied and its operation validated before implementation by using a combination of analytic and simulation models.

    The results of the analytic models are compared to the results of the simulation models to provide validation evidence for the simulation models.

    The use of models to quantify performance using both average and maximum values is shown.

    The average time between arrivals to a workstation should be equal to the takt time in order to produce the quantity of product demanded by a customer. Variation could result in the time between arrivals being greater than the takt time for any particular part. This could have a short term negative impact on the ability to meet customer demands.

    The average processing time at a workstation must be less than the takt time in order to produce the quantity of product demanded by a customer. Variation could result in the processing time being greater than the takt time for some items. This could have a short term negative impact on the ability to meet customer demands.

    The iterative nature of the simulation process is shown. A review of the initial study of the workstation leads to a request to include the three detractors in the simulation study, both individually and in combination. These detractors are batching with setup, breakdowns, and rejection and rework of a completed part.

    Statistical analysis is used to determine if the detractors have a significant effect on the lead time at the workstation when the detractors are present.


    This page titled 6.2: Points Made in the Case Study was last modified on Fri, 05 Mar 2021 08:19:22 GMT and is shared under a CC BY-NC-SA license and was authored, remixed, and/or curated by Charles R. Standridge.