3.3: Problems and References

Aircraft Engine: Design and Analysis · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    3.3: Problems and References

    Problem#1

    The following information is available for an aircraft four-stroke reciprocating engine:

    • indicated mean effective pressure (IMEP) = 140 psi
    • stroke = 4.5 in
    • bore = 4.5 in
    • engine rpm = 2700
    • number of cylinders = 6
    • cylinder clearance volume = 10 in³ (per cylinder)
    • engine mechanical efficiency = 90%
    • propeller efficiency = 82%

    Calculate (a) brake horsepower, (b) indicated horsepower, (c) thrust (hp), (d) compression ratio (is your answer reasonable for a spark ignition engine?)

    Problem#2

    A four-stroke piston aircraft engine delivers 180 brake horsepower while burning 13 gallons of aviation gasoline per hour. Determine

    1. the brake specific fuel consumption of the engine. Is your answer reasonable for aircraft spark-ignition engines?
    2. the brake thermal efficiency, of the engine. Is your answer reasonable for aircraft spark-ignition engines?

    Note: Assume the heating value of the fuel is 19,500 Btu/lb and the nominal weight of avgas is 6 lb/gal.

    Problem#3

    A general aviation aircraft engine (such as on a Cessna 172) uses a venturi carburetor to meter intake air. The carburetor features an inlet diameter of \(d_1=60~\mathrm{mm}\) and a narrowed throat diameter of \(d_t=38~\mathrm{mm}\). At full power, the static pressure drop from the inlet to the throat is \(ΔP=4.5~\mathrm{kPa}\).

    Assuming an ambient air density of \(ρ_a=1.15{~\mathrm{kg/m}}^3\), an air discharge coefficient of \(C_{da}=0.90\), and a local speed of sound of \(a=340~\mathrm{m/s}\):

    1. Compute the intake air mass flow rate \({\dot{m}}_a\) using the simplified venturi relation:
    2. Re-compute the mass flow rate using the exact incompressible flow equation accounting for inlet kinetic energy. Determine the percentage error of the approximate formula relative to the exact result.
    3. Calculate the average velocity at the throat \(V_t\). Evaluate whether the assumption of incompressible flow is physically justified.

    Problem#4

    A four-cylinder Lycoming O-320 aircraft engine (displacement \(V_D=320{~\mathrm{in}}^3\), brake power \(P_b=160~\mathrm{hp}\)) operates at \(2700~\mathrm{RPM}\) under full power. The induction system uses a venturi carburetor with the following operating parameters:

    • Volumetric efficiency: \(η_v=0.75\)
    • Ambient air density: \(ρ_a=0.07491{~\mathrm{lb/ft}}^3\qquad \left(0.002328{~\mathrm{slug/ft}}^3\right)\)
    • Fuel density: \(ρ_f=44.95{~\mathrm{lb/ft}}^3\qquad \left(1.3970{~\mathrm{slug/ft}}^3\right)\)
    • Air discharge coefficient: \(C_{da}=0.90\)
    • Fuel discharge coefficient: \(C_{df}=0.70\)
    • Fuel nozzle lip height: \(h=0.3937~\mathrm{in}=0.03281~\mathrm{ft}\)
    • Full-power pressure drop across venturi: \(ΔP=83.54{~\mathrm{lbf/ft}}^2=0.5802~\mathrm{psi}\)
    1. Calculate the engine air mass flow rate (\({\dot{m}}_a\)) in \(\mathrm{lb/s}\) and determine the required venturi throat diameter (\(d_t\)) in inches.
    2. Determine the required fuel mass flow rate (\({\dot{m}}_f\)) for a full-power air-fuel ratio of \(\mathrm{AFR}=12:1\), and compute the necessary main fuel jet diameter (\(d_f\)) in inches.
    3. Convert the fuel mass flow rate to \(\mathrm{lb/h}\) and calculate the Brake Specific Fuel Consumption (\(\mathrm{BSFC}\)). Evaluate whether this value is reasonable for an aircraft spark-ignition engine.
    4. Calculate the delivered \(\mathrm{AFR}\) at a reduced throttle setting where \(ΔP=8.354{~\mathrm{lbf/ft}}^2\qquad \left(0.05802~\mathrm{psi}\right)\), and explain the physical significance for engine operation at low airflow.

    Problem#5

    A 4-stroke aircraft piston engine produces a brake power (\(P_b\)) of \(180~\mathrm{hp}\) (\(134.2~\mathrm{kW}\)) at an engine speed of \(2700~\mathrm{RPM}\) while consuming aviation gasoline at a rate of \(m_f=0.0105~\mathrm{kg/s}\) (\(83.3~\mathrm{lb/hr}\)). The engine’s mechanical efficiency is \(η_m=85\%\) (\(0.85\)).

    1. Friction Power: Determine the friction power loss (\(\mathrm{FP}\)) in kilowatts (\(\mathrm{kW}\)).
    2. Brake Specific Fuel Consumption (BSFC): Calculate the BSFC in \(\mathrm{kg/kW}\cdot \mathrm{s}\)

    Problem#6

    A four-cylinder, four-stroke gasoline engine with a swept volume of \(122{~\mathrm{in}}^3\) runs at \(3000~\mathrm{RPM}\). Under ambient atmospheric conditions of \(14.7~\mathrm{psia}\) and \({77}^{\circ }\mathrm{F}\) (\(R=53.35~\mathrm{ft}\cdot \mathrm{lbf}/\mathrm{lbm}\cdot \mathrm{R}\)), an intake sensor records an induction air flow rate of \(0.115~\mathrm{lbm/s}\). Calculate the engine’s volumetric efficiency.

    Project#2:

    Consider a 6-cylinder four-stroke aircraft piston engine operating at \(N=2700~\mathrm{RPM}\) with a bore \(B=4.5~\mathrm{in}\), stroke \(S=4.5~\mathrm{in}\), clearance volume \(V_c=10{~\mathrm{in}}^3/\mathrm{cylinder}\), \(\mathrm{IMEP}=140~\mathrm{psi}\), mechanical efficiency \(η_m=90\%\), and propeller efficiency \(η_p=82\%\). At a break power of P\({}_{b}\) \(= 180~\mathrm{hp}\) the engine consumes \(\dot{m=}\) \(13~\mathrm{gal/hr}\) of Avgas (aviation gasoline) (\(\mathrm{density}=6~\mathrm{lb/gal}\), heating value \(=19,500~\mathrm{Btu/lb}\)). The engine is fed by a general aviation carburetor with inlet diameter \({\mathrm{d}}_{\mathrm{1}}\mathrm{=2.36}~\mathrm{in}\), \(throat diameter {\mathrm{d}}_{\mathrm{t}}\mathrm{=1.50}~\mathrm{in}\), and venturi pressure drop \(Δ\mathrm{P=0.653}~\mathrm{psi}\), air density \(ρ_{\mathrm{a}}\mathrm{=0.0718}{~\mathrm{lb/ft}}^{\mathrm{3}}\), \({\mathrm{C}}_{\mathrm{da}}\mathrm{=0.90}\), speed of sound \(\mathrm{a=1115.5}~\mathrm{ft/s}\)). A four-cylinder Lycoming O-320 engine (\(V_D=320{~\mathrm{in}}^3\), \(P_b=160~\mathrm{hp}\) at \(2700~\mathrm{RPM}\)) with parameters \(η_v=0.75\), \(ρ_a=0.07491{~\mathrm{lb/ft}}^3\), \(ρ_f=44.95{~\mathrm{lb/ft}}^3\), \(C_{da}=0.90\), \(C_{df}=0.70\), and fuel lip height \(h=0.3937~\mathrm{in}\)

    image4.png

    Part#1: Mechanical Performance Analysis

    1. Calculate the indicated horsepower (\(P_i\)), brake horsepower (\(P_b\)), thrust horsepower (\(\mathrm{THP}\)), and friction horsepower (\(\mathrm{FP}\)).
    2. Compute the Brake Mean Effective Pressure (\(\mathrm{BMEP}\)) and the engine compression ratio (\(r\)).
    3. Evaluate whether the calculated compression ratio is reasonable for aviation spark-ignition engines and discuss the physical/knocking constraints that limit compression ratios in general aviation.

    Part#2: Fuel Economy & Thermal Efficiency

    1. Calculate the Brake Specific Fuel Consumption (\(\mathrm{BSFC}\)) in \(\mathrm{lb}/\left(\mathrm{bhp}\cdot \mathrm{hr}\right)\).
    2. Compute the brake thermal efficiency (\(η_{th,b}\)).
    3. Compare your findings against standard general aviation benchmarks and comment on performance suitability.

    Part# 3: Aerodynamic Modeling of Intake Carburetion

    1. Calculate air mass flow rate \(m_a\) using both the simplified venturi relation and the exact incompressible flow equation accounting for inlet kinetic energy.
    2. Determine the percentage error induced by using the simplified equation.
    3. Calculate the throat velocity \(V_t\) and evaluate the throat Mach number to justify whether the incompressible flow assumption holds.

    Part#4: Fuel Metering & Mixture Enrichment Behavior

    1. Full-Power Condition (\(ΔP=83.54{~\mathrm{lbf/ft}}^2\)):
      1. Compute air mass flow rate \(m_a\) (\(\mathrm{lb/s}\)) and required venturi throat diameter \(d_t\) (\(\mathrm{in}\)).
      2. For a target full-power \(\mathrm{AFR}=12:1\), determine fuel mass flow rate \(m_f\) (\(\mathrm{lb/s}\)) and required main fuel jet diameter \(d_f\) (\(\mathrm{in}\)).
      3. Calculate \(\mathrm{BSFC}\) in \(\mathrm{lb}/\left(\mathrm{hp}\cdot \mathrm{hr}\right)\).
    2. Reduced Throttle Condition (\(ΔP=8.354{~\mathrm{lbf/ft}}^2\)):
      1. Compute the new delivered \(\mathrm{AFR}\).
      2. Explain the physical significance of the fuel lip height \(h\) on mixture leaning/enrichment at low airflow rates.

    Part#5: Electronic Fuel Injection (EFI) System Comparative Study

    Construct a comparative analysis between Port Fuel Injection (PFI) and Gasoline Direct Injection (GDI)

    1. Explain how differential pressure (\(ΔP_{\mathrm{inj}}\)), fuel density (\(ρ_f\)), orifice area (\(A_{\mathrm{orif}}\)), and electrical dead time (\(t_{\mathrm{dead}}\)) affect the injector pulse width duration (\(t_{\mathrm{total}}\)).
    2. Contrast the operating pressures (\(3--6~\mathrm{bar}\) vs. \(150--350+~\mathrm{bar}\)) and list advantages and challenges of integrating GDI into air-cooled aircraft engines.

    References

    Heywood, J. B. (1988). Internal Combustion Engine Fundamentals. McGraw-Hill Education.

    (Source for the four-stroke Otto cycle thermodynamics, volumetric efficiency parameters, and carburetor/injector fluid dynamics).

    Taylor, C. F. (1985). The Internal-Combustion Engine in Theory and Practice (Vols. 1 & 2). MIT Press.

    Mattingly, J. D. (1996). Elements of Gas Turbine Propulsion / Aircraft Engine Design. McGraw-Hill / AIAA.

    Federal Aviation Administration (FAA). Pilot’s Handbook of Aeronautical Knowledge (FAA-H-8083-25B) & Aviation Maintenance Technician Handbook—Powerplant (FAA-H-8083-32A).


    This page titled 3.3: Problems and References was last modified on Wed, 18 Nov 2026 07:18:36 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Haifa El-Sadi.