7.1: Heat transfer and Engine energy balance

Aircraft Engine: Design and Analysis · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    7.1: Heat transfer and Engine energy balance

    Applying the First Law of Thermodynamics to a control volume surrounding a steady-state engine yield:

    \[{\dot{m}}_ah_a+{\dot{m}}_fh_f=P_b+{\dot{Q}}_{\mathrm{loss}}{\dot{+{\dot{Q}}_{misc}+(m}}_{\mathrm{f}}+\dot{m_a})h_e \nonumber \]

    Where \(P_b\) is the brake power, \({\dot{Q}}_{\mathrm{loss}}\) is the heat transfer rate to the cooling media, \({\dot{Q}}_{misc}\) is the heat rejected to the oil + convection+ radiation from engines to external, \(h_e\) is the exhaust enthalpy

    Expressed on a fuel-energy basis:

    \[{\dot{m}}_fQ_{\mathrm{LHV}}=P_b+{\dot{Q}}_{\mathrm{loss}}+{\dot{Q}}_{\mathrm{misc}}+{\dot{H}}_{\mathrm{e,ic}}+h_{e,s}\dot{m} \nonumber \]

    Where \({\dot{H}}_{\mathrm{e,ic}}\) represents the exhaust enthalpy loss due to incomplete combustion, \({\dot{m}}_f\cdot Q_{\mathrm{LHV}}\) is fuel energy input (total rate of energy released by fuel combustion), \(P_b=2\pi NT\) = is useful work rate, N in rev/s, T =torque, (brake power), \({\dot{Q}}_{loss}={\dot{m}}_c\cdot c_{p,c}\cdot \left(T_{c,\mathrm{out}}-T_{c,\mathrm{in}}\right)\) is rate of heat rejection to the cooling fluid

    Brake thermal efficiency represents the useful fraction of fuel energy converted to power:

    \[\eta_f=\dfrac{P_b}{\dot{m}_fQ_\mathrm{LHV}} \nonumber \]

    Typical full-load energy distribution:

    • Brake Work: 25–35% (higher values expected in diesel engines)
    • Coolant Loss: 20–30%
    • Exhaust Loss: 30–40%
    • Friction, Radiation & Unburned Fuel: Remaining few percent

    Indicated power is given by:

    \[P_i=\mathrm{imep}\cdot V_d\cdot N\cdot \left(\dfrac{1}{n_R}\right) \nonumber \]

    Where \(n_R\) is the number of crank revolutions per power stroke (\(n=2\) for a four-stroke cycle, where one power stroke occurs every two crankshaft revolutions, and \(n=1\) for a two-stroke cycle, where one power stroke occurs every single crankshaft revolution), \(N\) is the engine crankshaft speed (the rotational speed of the crankshaft), \(V_d\) is the displaced volume or engine displacement, which is the total volume swept by the piston as it travels from Top Dead Center (TDC) to Bottom Dead Center (BDC) calculated for a single cylinder of bore \(B\) and stroke \(S\) as \(V_d=\dfrac{\pi }{4}B^2S\) and \(\mathrm{IMEP}\) is the indicated mean effective pressure, which is a fictitious constant pressure that, if applied to the piston during the power stroke, would produce the same net indicated work per cycle (\(W_i\)) as the actual fluctuating cylinder pressure profile. The relationship between indicated power, brake power, and friction power is expressed through mean effective pressure (\(\mathrm{mep}\)):

    \[\mathrm{bmep}={\mathrm{imep}}_n-\mathrm{rfmep}-amep \nonumber \]

    Where bmep is the brake mean effective pressure, imep is net indicated mean effective pressure, and amep is auxiliary (or accessory) mean effective pressure. Heywood defines total engine friction (\(t\mathrm{fmep}\)) as the sum of mechanical rubbing friction (\(\mathrm{rfmep}\)), pumping losses (\(\mathrm{pmep}\)), and accessory/auxiliary losses (\(\mathrm{amep}\)):

    \[\mathrm{t}\mathrm{fmep}=\mathrm{rfmep}+\mathrm{pmep}+\mathrm{amep} \nonumber \]

    For specified engine geometry, \(t\mathrm{fmep}\) is frequently expressed as a quadratic function of crankshaft rotational speed \(N\):

    \[\mathrm{t}\mathrm{fmep}=C_1+C_2\left(\dfrac{N}{1000}\right)+C_3{\left(\dfrac{N}{1000}\right)}^2 \nonumber \]


    This page titled 7.1: Heat transfer and Engine energy balance was last modified on Wed, 18 Nov 2026 07:22:38 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by .