2: Compressible Flow With Heat Addition

Aircraft Engine: Design and Analysis · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    2: Compressible Flow With Heat Addition

    • 2.0: Introduction
      This page discusses Rayleigh flow, a key concept in 1D compressible wave propagation relevant to high-speed propulsion such as jet engines. It addresses pressure drops and temperature rises in combustion, examines afterburners in supersonic aircraft, and assesses thermal choking limits in ramjet and scramjet combustors. The concept helps estimate compressible flow characteristics in industry and emphasizes the importance of the Mach number in determining when gas flow becomes compressible.
    • 2.1: Subsonic, sonic and supersonic flow
      This page discusses the Mach number and its categorization of compressible flow into three regimes: subsonic, sonic, and supersonic. It explains pressure disturbance behavior and fluid acceleration in subsonic and supersonic flows, highlighting the choked condition at the nozzle throat during sonic flow. Additionally, it covers mass flow rate calculations based on local flow area, Mach number, total pressure, and temperature in steady flow conditions.
    • 2.2: Rayleigh flow
      This page focuses on Rayleigh flow, highlighting the steady, one-dimensional, frictionless flow of a perfect gas in ducts with heat transfer, important for combustion. It examines how heat addition influences subsonic and supersonic flow, accelerating the former while decelerating the latter, with implications like thermal choking at Mach 1.
    • 2.3: Problems and References
      This page covers Rayleigh flow in circular ducts, examining how thermal energy addition impacts airflow parameters like Mach number and mass flow rate. It presents problems on calculating critical heat input and thermal choking in supersonic flows.


    This page titled 2: Compressible Flow With Heat Addition was last modified on Wed, 18 Nov 2026 07:18:30 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Haifa El-Sadi.