5.8: Naming Molecular Compounds

CHEM 114: Introductory Chemistry · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY-NC-SA 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    5.8: Naming Molecular Compounds

    Chapter 1
    1. Chapter 1: The Chemical World
    2. 1.1: The Scope of Chemistry
    3. 1.2: Chemicals Compose Ordinary Things
    4. 1.3: Hypothesis, Theories, and Laws
    5. 1.4: The Scientific Method: How Chemists Think
    6. 1.5: A Beginning Chemist: How to Succeed
     •  Chapter 2
    1. Chapter 2: Measurement and Problem Solving
    2. 2.1: Taking Measurements
    3. 2.2: Scientific Notation: Writing Large and Small Numbers
    4. 2.3: Significant Figures: Writing Numbers to Reflect Precision
    5. 2.4: Significant Figures in Calculations
    6. 2.5: The Basic Units of Measurement
    7. 2.6: Problem Solving and Unit Conversions
    8. 2.7: Solving Multistep Conversion Problems
    9. 2.8: Units Raised to a Power
    10. 2.9: Density
    11. 2.10: Numerical Problem-Solving Strategies and the Solution Map
    12. 2.E: Measurement and Problem Solving (Exercises)
     •  Chapter 3
    1. Chapter 3: Matter and Energy
    2. 3.1: In Your Room
    3. 3.2: What is Matter?
    4. 3.3: Classifying Matter According to Its State: Solid, Liquid, and Gas
    5. 3.4: Classifying Matter According to Its Composition
    6. 3.5: Differences in Matter: Physical and Chemical Properties
    7. 3.6: Changes in Matter: Physical and Chemical Changes
    8. 3.7: Conservation of Mass: There is No New Matter
    9. 3.8: Energy
    10. 3.9: Energy and Chemical and Physical Change
    11. 3.10: Temperature: Random Motion of Molecules and Atoms
    12. 3.11: Temperature Changes: Heat Capacity
    13. 3.12: Energy and Heat Capacity Calculations
    14. 3.E: Exercises
     •  Chapter 4
    1. Chapter 4: Atoms and Elements
    2. 4.1: Experiencing Atoms at Tiburon
    3. 4.2: Indivisible: The Atomic Theory
    4. 4.3: The Nuclear Atom
    5. 4.4: The Properties of Protons, Neutrons, and Electrons
    6. 4.5: Elements: Defined by Their Numbers of Protons
    7. 4.6: Looking for Patterns: The Periodic Law and the Periodic Table
    8. 4.7: Ions: Losing and Gaining Electrons
    9. 4.8: Isotopes: When the Number of Neutrons Varies
    10. 4.9: Atomic Mass: The Average Mass of an Element’s Atoms
      •  Chapter 5
    1. Chapter 5: Molecules and Compounds
    2. 5.1: Sugar and Salt
    3. 5.2: Compounds Display Constant Composition
    4. 5.3: Chemical Formulas: How to Represent Compounds
    5. 5.4: A Molecular View of Elements and Compounds
    6. 5.5: Writing Formulas for Ionic Compounds
    7. 5.6: Nomenclature: Naming Compounds
    8. 5.7: Naming Ionic Compounds
    9. 5.8: Naming Molecular Compounds
    10. 5.9: Naming Acids
    11. 5.10: Nomenclature Summary
    12. 5.11: Formula Mass: The Mass of a Molecule or Formula Unit
      •  Chapter 6
    1. Chapter 6: Chemical Composition
    2. 6.1: How Much Sodium?
    3. 6.2: Counting Nails by the Pound
    4. 6.3: Counting Atoms by the Gram
    5. 6.4: Counting Molecules by the Gram
    6. 6.5: Chemical Formulas as Conversion Factors
    7. 6.6: Mass Percent Composition of Compounds
    8. 6.7: Mass Percent Composition from a Chemical Formula
    9. 6.8: Calculating Empirical Formulas for Compounds
    10. 6.9: Calculating Molecular Formulas for Compounds
      •  Chapter 7
    1. Chapter 7: Chemical Reactions
    2. 7.1: Grade School Volcanoes, Automobiles, and Laundry Detergents
    3. 7.2: Evidence of a Chemical Reaction
    4. 7.3: The Chemical Equation
    5. 7.4: How to Write Balanced Chemical Equations
    6. 7.5: Aqueous Solutions and Solubility: Compounds Dissolved in Water
    7. 7.6: Precipitation Reactions: Reactions in Aqueous Solution That Form a Solid
    8. 7.7: Writing Chemical Equations for Reactions in Solution: Molecular, Complete Ionic, and Net Ionic Equations
    9. 7.8: Acid–Base and Gas Evolution Reactions
    10. 7.9: Oxidation–Reduction Reactions
    11. 7.10: Classifying Chemical Reactions
    12. 7.11: The Activity Series
     •  Chapter 8
    1. Chapter 8: Quantities in Chemical Reactions
    2. 8.1: Climate Change: Too Much Carbon Dioxide
    3. 8.2: Stoichiometry
    4. 8.3: Making Molecules: Mole-to-Mole Conversions
    5. 8.4: Making Molecules: Mass-to-Mass Conversions
    6. 8.5: Limiting Reactant, Theoretical Yield, and Percent Yield
    7. 8.6: Limiting Reactant, Theoretical Yield, and Percent Yield from Initial Masses of Reactants
    8. 8.7: Enthalpy: A Measure of the Heat Evolved or Absorbed in a Reaction
    Chapter 9
    1. Chapter 9: Electrons in Atoms and the Periodic Table
    2. 9.1: Blimps, Balloons, and Models of the Atom
    3. 9.2: Light: Electromagnetic Radiation
    4. 9.3: The Electromagnetic Spectrum
    5. 9.4: The Bohr Model: Atoms with Orbits
    6. 9.5: The Quantum-Mechanical Model: Atoms with Orbitals
    7. 9.6: Quantum-Mechanical Orbitals and Electron Configurations
    8. 9.7: Electron Configurations and the Periodic Table
    9. 9.8: The Explanatory Power of the Quantum-Mechanical Model
    10. 9.9: Periodic Trends: Atomic Size, Ionization Energy, and Metallic Character
     •  Chapter 10
    1. Chapter 10: Chemical Bonding
    2. 10.1: Bonding Models and AIDS Drugs
    3. 10.2: Representing Valence Electrons with Dots
    4. 10.3: Lewis Structures of Ionic Compounds: Electrons Transferred
    5. 10.4: Covalent Lewis Structures: Electrons Shared
    6. 10.5: Writing Lewis Structures for Covalent Compounds
    7. 10.6: Resonance: Equivalent Lewis Structures for the Same Molecule
    8. 10.7: Predicting the Shapes of Molecules
    9. 10.8: Electronegativity and Polarity: Why Oil and Water Don’t Mix
     •  Chapter 11
    1. Chapter 11: Gases
    2. 11.1: Extra-Long Straws
    3. 11.2: Kinetic Molecular Theory: A Model for Gases
    4. 11.3: Pressure: The Result of Constant Molecular Collisions
    5. 11.4: Boyle’s Law: Pressure and Volume
    6. 11.5: Charles’s Law: Volume and Temperature
    7. 11.6: Gay-Lussac's Law: Temperature and Pressure
    8. 11.7: The Combined Gas Law: Pressure, Volume, and Temperature
    9. 11.8: Avogadro’s Law: Volume and Moles
    10. 11.9: The Ideal Gas Law: Pressure, Volume, Temperature, and Moles
    11. 11.10: Mixtures of Gases: Why Deep-Sea Divers Breathe a Mixture of Helium and Oxygen
    12. 11.11: Gases in Chemical Reactions
     •  Chapter 12
    1. Chapter 12: Liquids, Solids, and Intermolecular Forces
    2. 12.1: Interactions between Molecules
    3. 12.2: Properties of Liquids and Solids
    4. 12.3: Intermolecular Forces in Action: Surface Tension and Viscosity
    5. 12.4: Evaporation and Condensation
    6. 12.5: Melting, Freezing, and Sublimation
    7. 12.6: Types of Intermolecular Forces: Dispersion, Dipole–Dipole, Hydrogen Bonding, and Ion-Dipole
    8. 12.7: Types of Crystalline Solids: Molecular, Ionic, and Atomic
    9. 12.8: Water: A Remarkable Molecule
     •  Chapter 13
    1. Chapter 13: Solutions
    2. 13.1: Prelude - Tragedy in Cameroon
    3. 13.2: Solutions: Homogeneous Mixtures
    4. 13.3: Solutions of Solids Dissolved in Water: How to Make Rock Candy
    5. 13.4: Solutions of Gases in Water: How Soda Pop Gets Its Fizz
    6. 13.5: Solution Concentration: Mass Percent
    7. 13.6: Solution Concentration: Molarity
    8. 13.7: Solution Dilution
    9. 13.8: Solution Stoichiometry
    10. 13.9: Freezing Point Depression and Boiling Point Elevation: Making Water Freeze Colder and Boil Hotter
    11. 13.10: Osmosis: Why Drinking Salt Water Causes Dehydration
      •  Chapter 14
    1. Chapter 14: Acids and Bases
    2. 14.1: Sour Patch Kids and International Spy Movies
    3. 14.2: Acids: Properties and Examples
    4. 14.3: Bases: Properties and Examples
    5. 14.4: Molecular Definitions of Acids and Bases
    6. 14.5: Reactions of Acids and Bases
    7. 14.6: Acid–Base Titration: A Way to Quantify the Amount of Acid or Base in a Solution
    8. 14.7: Strong and Weak Acids and Bases
    9. 14.8: Water: Acid and Base in One
    10. 14.9: The pH and pOH Scales: Ways to Express Acidity and Basicity
    11. 14.10: Buffers: Solutions That Resist pH Change
     

    Template:HideTOC

    Learning Objectives
    • Determine the name of a simple molecular compound from its chemical formula.

    Molecular Compounds

    Molecular compounds are inorganic compounds that take the form of discrete molecules. Examples include such familiar substances as water \(\left( \ce{H_2O} \right)\) and carbon dioxide \(\left( \ce{CO_2} \right)\). These compounds are very different from ionic compounds like sodium chloride \(\left( \ce{NaCl} \right)\). Ionic compounds are formed when metal atoms lose one or more of their electrons to nonmetal atoms. The resulting cations and anions are electrostatically attracted to each other.

    So what holds the atoms of a molecule together? Rather than forming ions, the atoms of a molecule share their electrons in such a way that a bond forms between a pair of atoms. In a carbon dioxide molecule, there are two of these bonds, each occurring between the carbon atom and one of the two oxygen atoms.

    Model of a molecule with two red spheres representing atoms and a black sphere in the center, depicting chemical bonding.
    Figure \(\PageIndex{1}\): Carbon dioxide molecules consist of a central carbon atom bonded to 2 oxygen atoms.

    Larger molecules can have many, many bonds that serve to keep the molecule together. In a large sample of a given molecular compound, all of the individual molecules are identical.

    Naming Binary Molecular Compounds

    Recall that a molecular formula shows the number of atoms of each element that a molecule contains. A molecule of water contains two hydrogen atoms and one oxygen atom, so its formula is \(\ce{H_2O}\). A molecule of octane, which is a component of gasoline, contains 8 atoms of carbon and 18 atoms of hydrogen. The molecular formula of octane is \(\ce{C_8H_{18}}\).

    A transparent bottle filled with orange liquid and a green cap.
    Figure \(\PageIndex{2}\): Nitrogen dioxide \(\left( \ce{NO_2} \right)\) is a reddish-brown toxic gas that is a prominent air pollutant produced by internal combustion engines.

    Naming binary (two-element) molecular compounds is similar to naming simple ionic compounds. The first element in the formula is simply listed using the name of the element. The second element is named by taking the stem of the element name and adding the suffix -ide. A system of numerical prefixes is used to specify the number of atoms in a molecule. Table \(\PageIndex{1}\) lists these numerical prefixes.

    Table \(\PageIndex{1}\): Numerical Prefixes for Naming Binary Covalent Compounds
    Number of Atoms in Compound Prefix on the Name of the Element
    1 mono-*
    2 di-
    3 tri-
    4 tetra-
    5 penta-
    6 hexa-
    7 hepta-
    8 octa-
    9 nona-
    10 deca-

    *This prefix is not used for the first element’s name.

    Diagram showing the compound formula Cl₂O₇, labeled as "dichlorine heptaoxide" with notes on naming adjustments.

    Note
    • Generally, the less electronegative element is written first in the formula, though there are a few exceptions. Carbon is always first in a formula and hydrogen is after nitrogen in a formula such as \(\ce{NH_3}\). The order of common nonmetals in binary compound formulas is \(\ce{C}\), \(\ce{P}\), \(\ce{N}\), \(\ce{H}\), \(\ce{S}\), \(\ce{I}\), \(\ce{Br}\), \(\ce{Cl}\), \(\ce{O}\), \(\ce{F}\).
    • The a or o at the end of a prefix is usually dropped from the name when the name of the element begins with a vowel. As an example, four oxygen atoms, is tetroxide instead of tetraoxide.
    • The prefix is "mono" is not added to the first element’s name if there is only one atom of the first element in a molecule.

    Some examples of molecular compounds are listed in Table \(\PageIndex{2}\).

    Table \(\PageIndex{2}\)
    Formula Name
    \(\ce{NO}\) nitrogen monoxide
    \(\ce{N_2O}\) dinitrogen monoxide
    \(\ce{S_2Cl_2}\) disulfur dichloride
    \(\ce{Cl_2O_7}\) dichlorine heptoxide

    Notice that the mono- prefix is not used with the nitrogen in the first compound, but is used with the oxygen in both of the first two examples. The \(\ce{S_2Cl_2}\) emphasizes that the formulas for molecular compounds are not reduced to their lowest ratios. The o of the mono- and the a of hepta- are dropped from the name when paired with oxide.

    Exercise \(\PageIndex{1}\)

    Write the name for each compound.

    1. CF4
    2. SeCl2
    3. SO3
    Answer a:
    carbon tetrafluoride
    Answer b:
    selenium dichloride
    Answer c:
    sulfur trioxide

    Simple molecular compounds with common names

    For some simple covalent compounds, we use common names rather than systematic names. We have already encountered these compounds, but we list them here explicitly:

    • H2O: water
    • NH3: ammonia
    • CH4: methane
    • H2O2: hydrogen peroxide

    Methane is the simplest organic compound. Organic compounds are compounds with carbon atoms and are named by a separate nomenclature system.

    Some Compounds Have Both Covalent and Ionic Bonds

    If you recall the introduction of polyatomic ions, you will remember that the bonds that hold the polyatomic ions together are covalent bonds. Once the polyatomic ion is constructed with covalent bonds, it reacts with other substances as an ion. The bond between a polyatomic ion and another ion will be ionic. An example of this type of situation is in the compound sodium nitrate. Sodium nitrate is composed of a sodium ion and a nitrate ion. The nitrate ion is held together by covalent bonds and the nitrate ion is attached to the sodium ion by an ionic bond.

    Summary

    • A molecular compound is usually composed of two or more nonmetal elements.
    • Molecular compounds are named with the first element first and then the second element by using the stem of the element name plus the suffix -ide. Numerical prefixes are used to specify the number of atoms in a molecule.

    5.8: Naming Molecular Compounds is shared under a CC BY-NC-SA 4.0 license and was authored, remixed, and/or curated by LibreTexts.