13.6: Solution Concentration- Molarity

CHEM 114: Introductory Chemistry · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY-NC-SA 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    13.6: Solution Concentration- Molarity

    Chapter 1
    1. Chapter 1: The Chemical World
    2. 1.1: The Scope of Chemistry
    3. 1.2: Chemicals Compose Ordinary Things
    4. 1.3: Hypothesis, Theories, and Laws
    5. 1.4: The Scientific Method: How Chemists Think
    6. 1.5: A Beginning Chemist: How to Succeed
     •  Chapter 2
    1. Chapter 2: Measurement and Problem Solving
    2. 2.1: Taking Measurements
    3. 2.2: Scientific Notation: Writing Large and Small Numbers
    4. 2.3: Significant Figures: Writing Numbers to Reflect Precision
    5. 2.4: Significant Figures in Calculations
    6. 2.5: The Basic Units of Measurement
    7. 2.6: Problem Solving and Unit Conversions
    8. 2.7: Solving Multistep Conversion Problems
    9. 2.8: Units Raised to a Power
    10. 2.9: Density
    11. 2.10: Numerical Problem-Solving Strategies and the Solution Map
    12. 2.E: Measurement and Problem Solving (Exercises)
     •  Chapter 3
    1. Chapter 3: Matter and Energy
    2. 3.1: In Your Room
    3. 3.2: What is Matter?
    4. 3.3: Classifying Matter According to Its State: Solid, Liquid, and Gas
    5. 3.4: Classifying Matter According to Its Composition
    6. 3.5: Differences in Matter: Physical and Chemical Properties
    7. 3.6: Changes in Matter: Physical and Chemical Changes
    8. 3.7: Conservation of Mass: There is No New Matter
    9. 3.8: Energy
    10. 3.9: Energy and Chemical and Physical Change
    11. 3.10: Temperature: Random Motion of Molecules and Atoms
    12. 3.11: Temperature Changes: Heat Capacity
    13. 3.12: Energy and Heat Capacity Calculations
    14. 3.E: Exercises
     •  Chapter 4
    1. Chapter 4: Atoms and Elements
    2. 4.1: Experiencing Atoms at Tiburon
    3. 4.2: Indivisible: The Atomic Theory
    4. 4.3: The Nuclear Atom
    5. 4.4: The Properties of Protons, Neutrons, and Electrons
    6. 4.5: Elements: Defined by Their Numbers of Protons
    7. 4.6: Looking for Patterns: The Periodic Law and the Periodic Table
    8. 4.7: Ions: Losing and Gaining Electrons
    9. 4.8: Isotopes: When the Number of Neutrons Varies
    10. 4.9: Atomic Mass: The Average Mass of an Element’s Atoms
      •  Chapter 5
    1. Chapter 5: Molecules and Compounds
    2. 5.1: Sugar and Salt
    3. 5.2: Compounds Display Constant Composition
    4. 5.3: Chemical Formulas: How to Represent Compounds
    5. 5.4: A Molecular View of Elements and Compounds
    6. 5.5: Writing Formulas for Ionic Compounds
    7. 5.6: Nomenclature: Naming Compounds
    8. 5.7: Naming Ionic Compounds
    9. 5.8: Naming Molecular Compounds
    10. 5.9: Naming Acids
    11. 5.10: Nomenclature Summary
    12. 5.11: Formula Mass: The Mass of a Molecule or Formula Unit
      •  Chapter 6
    1. Chapter 6: Chemical Composition
    2. 6.1: How Much Sodium?
    3. 6.2: Counting Nails by the Pound
    4. 6.3: Counting Atoms by the Gram
    5. 6.4: Counting Molecules by the Gram
    6. 6.5: Chemical Formulas as Conversion Factors
    7. 6.6: Mass Percent Composition of Compounds
    8. 6.7: Mass Percent Composition from a Chemical Formula
    9. 6.8: Calculating Empirical Formulas for Compounds
    10. 6.9: Calculating Molecular Formulas for Compounds
      •  Chapter 7
    1. Chapter 7: Chemical Reactions
    2. 7.1: Grade School Volcanoes, Automobiles, and Laundry Detergents
    3. 7.2: Evidence of a Chemical Reaction
    4. 7.3: The Chemical Equation
    5. 7.4: How to Write Balanced Chemical Equations
    6. 7.5: Aqueous Solutions and Solubility: Compounds Dissolved in Water
    7. 7.6: Precipitation Reactions: Reactions in Aqueous Solution That Form a Solid
    8. 7.7: Writing Chemical Equations for Reactions in Solution: Molecular, Complete Ionic, and Net Ionic Equations
    9. 7.8: Acid–Base and Gas Evolution Reactions
    10. 7.9: Oxidation–Reduction Reactions
    11. 7.10: Classifying Chemical Reactions
    12. 7.11: The Activity Series
     •  Chapter 8
    1. Chapter 8: Quantities in Chemical Reactions
    2. 8.1: Climate Change: Too Much Carbon Dioxide
    3. 8.2: Stoichiometry
    4. 8.3: Making Molecules: Mole-to-Mole Conversions
    5. 8.4: Making Molecules: Mass-to-Mass Conversions
    6. 8.5: Limiting Reactant, Theoretical Yield, and Percent Yield
    7. 8.6: Limiting Reactant, Theoretical Yield, and Percent Yield from Initial Masses of Reactants
    8. 8.7: Enthalpy: A Measure of the Heat Evolved or Absorbed in a Reaction
    Chapter 9
    1. Chapter 9: Electrons in Atoms and the Periodic Table
    2. 9.1: Blimps, Balloons, and Models of the Atom
    3. 9.2: Light: Electromagnetic Radiation
    4. 9.3: The Electromagnetic Spectrum
    5. 9.4: The Bohr Model: Atoms with Orbits
    6. 9.5: The Quantum-Mechanical Model: Atoms with Orbitals
    7. 9.6: Quantum-Mechanical Orbitals and Electron Configurations
    8. 9.7: Electron Configurations and the Periodic Table
    9. 9.8: The Explanatory Power of the Quantum-Mechanical Model
    10. 9.9: Periodic Trends: Atomic Size, Ionization Energy, and Metallic Character
     •  Chapter 10
    1. Chapter 10: Chemical Bonding
    2. 10.1: Bonding Models and AIDS Drugs
    3. 10.2: Representing Valence Electrons with Dots
    4. 10.3: Lewis Structures of Ionic Compounds: Electrons Transferred
    5. 10.4: Covalent Lewis Structures: Electrons Shared
    6. 10.5: Writing Lewis Structures for Covalent Compounds
    7. 10.6: Resonance: Equivalent Lewis Structures for the Same Molecule
    8. 10.7: Predicting the Shapes of Molecules
    9. 10.8: Electronegativity and Polarity: Why Oil and Water Don’t Mix
     •  Chapter 11
    1. Chapter 11: Gases
    2. 11.1: Extra-Long Straws
    3. 11.2: Kinetic Molecular Theory: A Model for Gases
    4. 11.3: Pressure: The Result of Constant Molecular Collisions
    5. 11.4: Boyle’s Law: Pressure and Volume
    6. 11.5: Charles’s Law: Volume and Temperature
    7. 11.6: Gay-Lussac's Law: Temperature and Pressure
    8. 11.7: The Combined Gas Law: Pressure, Volume, and Temperature
    9. 11.8: Avogadro’s Law: Volume and Moles
    10. 11.9: The Ideal Gas Law: Pressure, Volume, Temperature, and Moles
    11. 11.10: Mixtures of Gases: Why Deep-Sea Divers Breathe a Mixture of Helium and Oxygen
    12. 11.11: Gases in Chemical Reactions
     •  Chapter 12
    1. Chapter 12: Liquids, Solids, and Intermolecular Forces
    2. 12.1: Interactions between Molecules
    3. 12.2: Properties of Liquids and Solids
    4. 12.3: Intermolecular Forces in Action: Surface Tension and Viscosity
    5. 12.4: Evaporation and Condensation
    6. 12.5: Melting, Freezing, and Sublimation
    7. 12.6: Types of Intermolecular Forces: Dispersion, Dipole–Dipole, Hydrogen Bonding, and Ion-Dipole
    8. 12.7: Types of Crystalline Solids: Molecular, Ionic, and Atomic
    9. 12.8: Water: A Remarkable Molecule
     •  Chapter 13
    1. Chapter 13: Solutions
    2. 13.1: Prelude - Tragedy in Cameroon
    3. 13.2: Solutions: Homogeneous Mixtures
    4. 13.3: Solutions of Solids Dissolved in Water: How to Make Rock Candy
    5. 13.4: Solutions of Gases in Water: How Soda Pop Gets Its Fizz
    6. 13.5: Solution Concentration: Mass Percent
    7. 13.6: Solution Concentration: Molarity
    8. 13.7: Solution Dilution
    9. 13.8: Solution Stoichiometry
    10. 13.9: Freezing Point Depression and Boiling Point Elevation: Making Water Freeze Colder and Boil Hotter
    11. 13.10: Osmosis: Why Drinking Salt Water Causes Dehydration
      •  Chapter 14
    1. Chapter 14: Acids and Bases
    2. 14.1: Sour Patch Kids and International Spy Movies
    3. 14.2: Acids: Properties and Examples
    4. 14.3: Bases: Properties and Examples
    5. 14.4: Molecular Definitions of Acids and Bases
    6. 14.5: Reactions of Acids and Bases
    7. 14.6: Acid–Base Titration: A Way to Quantify the Amount of Acid or Base in a Solution
    8. 14.7: Strong and Weak Acids and Bases
    9. 14.8: Water: Acid and Base in One
    10. 14.9: The pH and pOH Scales: Ways to Express Acidity and Basicity
    11. 14.10: Buffers: Solutions That Resist pH Change
     

    Template:HideTOC

    Learning Objectives
    • Use molarity to determine quantities in chemical reactions.
    • Use molarity as a conversion factor in calculations.

    Another way of expressing concentration is to give the number of moles of solute per unit volume of solution. Of all the quantitative measures of concentration, molarity is the one used most frequently by chemists. Molarity is defined as the number of moles of solute per liter of solution.

    \[\mathrm{molarity=\dfrac{number\: of\: moles\: of\: solute}{number\: of\: liters\: of\: solution}} \label{defMolarity} \]

    The symbol for molarity is \(\text{M}\) or moles/liter. Chemists also use square brackets to indicate a reference to the molarity of a substance. For example, the expression \(\left[ \ce{Ag^+} \right]\) refers to the molarity of the silver ion in solution. Solution concentrations expressed in molarity are the easiest to perform calculations with, but the most difficult to make in the lab. Such concentration units are useful for discussing chemical reactions in which a solute is a product or a reactant. Molar mass can then be used as a conversion factor to convert amounts in moles to amounts in grams.

    It is important to remember that “mol” in this expression refers to moles of solute and that “L” refers to liters of solution. For example, if you have 1.5 mol of NaCl dissolved in 0.500 L of solution, its molarity is

    \[\mathrm{\dfrac{1.5\: mol\: NaCl}{0.500\: L\: solution}=3.0\: M\: NaCl} \nonumber \]

    Sometimes (aq) is added when the solvent is water, as in “3.0 M NaCl (aq).” This is read as "a 3.00 molar sodium chloride solution," meaning that there are 3.00 moles of NaOH dissolved per one liter of solution.

    Be sure to note that molarity is calculated as the total volume of the entire solution, not just volume of solvent! The solute contributes to total volume.

    If the quantity of the solute is given in mass units, you must convert mass units to mole units before using the definition of molarity to calculate concentration. For example, what is the molar concentration of a solution of 22.4 g of HCl dissolved in 1.56 L?

    Step 1: First, convert the mass of solute to moles using the molar mass of HCl (36.5 g/mol):

    \[22.4\cancel{gHCl}\times \dfrac{1\: mol\: HCl}{36.5\cancel{gHCl}}=0.614\, mol\; HCl \nonumber \]

    Step 2: Now we can use the definition of molarity to determine a concentration:

    \[M \: =\: \dfrac{0.614\: mol\: HCl}{1.56L\: solution}=0.394\, M HCl \nonumber \]

    Before a molarity concentration can be calculated, the amount of the solute must be expressed in moles, and the volume of the solution must be expressed in liters, as demonstrated in the following example.

    Example \(\PageIndex{1}\)

    A solution is prepared by dissolving \(42.23 \: \text{g}\) of \(\ce{NH_4Cl}\) into enough water to make \(500.0 \: \text{mL}\) of solution. Calculate its molarity.

    Solution
    Solutions to Example 13.6.1
    Steps for Problem Solving
    Identify the "given" information and what the problem is asking you to "find."

    Given:

    Mass \(= 42.23 \: \text{g} \: \ce{NH_4Cl}\)

    Volume solution \(= 500.0 \: \text{mL} = 0.5000 \: \text{L}\)

    Find: Molarity = ? M

    List other known quantities. Molar mass \(\ce{NH_4Cl} = 53.50 \: \text{g/mol}\)
    Plan the problem.

    1. The mass of the ammonium chloride is first converted to moles.

    Conversion diagram illustrating the relationship between grams and moles of NH₄Cl with a conversion factor.

    2. Then the molarity is calculated by dividing by liters. Note the given volume has been converted to liters.

    \(\mathrm{M=\dfrac{mol\: NH_4Cl}{L\: solution}} \)

    Cancel units and calculate.

    Now substitute the known quantities into the equation and solve.

    \(\begin{align*} 42.23 \ \cancel{\text{g} \: \ce{NH_4Cl}} \times \dfrac{1 \: \text{mol} \: \ce{NH_4Cl}}{53.50 \: \cancel{\text{g} \: \ce{NH_4Cl}}} &= 0.7893 \: \text{mol} \: \ce{NH_4Cl} \\ \dfrac{0.7893 \: \text{mol} \: \ce{NH_4Cl}}{0.5000 \: \text{L solution}} &= 1.579 \: \text{M} \end{align*}\)

    Think about your result. The molarity is \(1.579 \: \text{M}\), meaning that a liter of the solution would contain \(1.579 \: \text{mol} \: \ce{NH_4Cl}\). Four significant figures are appropriate.
    Exercise \(\PageIndex{1A}\)

    What is the molarity of a solution made when 66.2 g of C6H12O6 are dissolved to make 235 mL of solution?

    Answer

    1.57 M C6H12O6

    Exercise \(\PageIndex{1B}\)

    What is the concentration, in \(\text{mol/L}\), where \(137 \: \text{g}\) of \(\ce{NaCl}\) has been dissolved in enough water to make \(500 \: \text{mL}\) of solution?

    Answer

    4.69 M NaCl

    Using Molarity in Calculations

    Concentration can be a conversion factor between the amount of solute and the amount of solution or solvent (depending on the definition of the concentration unit). As such, concentrations can be useful in a variety of stoichiometry problems. In many cases, it is best to use the original definition of the concentration unit; it is that definition that provides the conversion factor.

    A simple example of using a concentration unit as a conversion factor is one in which we use the definition of the concentration unit and rearrange; we can do the calculation again as a unit conversion, rather than as a definition.

    Example \(\PageIndex{2}\): Determining Moles of Solute, Given the Concentration and Volume of a Solution

    For example, suppose we ask how many moles of solute are present in 0.108 L of a 0.887 M NaCl solution. Because 0.887 M means 0.887 mol/L, we can use this second expression for the concentration as a conversion factor:

    Solution

    Diagram showing conversion from liters of solution to moles of NaCl, with 0.887 mol NaCl in 1 L solution.

    \[0.108\cancel{L\, solution}\times \dfrac{0.887\, mol\, NaCl}{\cancel{1L\, solution}}=0.0958\, mol\, NaCl \nonumber \]

    If we used the definition approach, we get the same answer, but now we are using conversion factor skills.

    Like any other conversion factor that relates two different types of units, the reciprocal of the concentration can be also used as a conversion factor.

    Example \(\PageIndex{3}\): Determining Volume of a Solution, Given the Concentration and Moles of Solute

    Using concentration as a conversion factor, how many liters of 2.35 M CuSO4 are needed to obtain 4.88 mol of CuSO4?

    Solution

    This is a one-step conversion, but the concentration must be written as the reciprocal for the units to work out:

    Flowchart showing conversion from moles of CuSO₄ to liters of solution, with a ratio of 1 L solution to 2.35 mol CuSO₄.

    \[4.88\cancel{mol\, CuSO_{4}}\times \dfrac{1\, L\, solution}{2.35\cancel{mol\, CuSO_{4}}}=2.08\, L\, of \, solution \nonumber \]

    In a laboratory situation, a chemist must frequently prepare a given volume of solutions of a known molarity. The task is to calculate the mass of the solute that is necessary. The molarity equation can be rearranged to solve for moles, which can then be converted to grams. The following example illustrates this.

    Example \(\PageIndex{4}\)

    A chemist needs to prepare \(3.00 \: \text{L}\) of a \(0.250 \: \text{M}\) solution of potassium permanganate \(\left( \ce{KMnO_4} \right)\). What mass of \(\ce{KMnO_4}\) does she need to make the solution?

    Solution
    Solutions to Example 13.6.4
    Steps for Problem Solving
    Identify the "given" information and what the problem is asking you to "find."

    Given:

    Molarity \(= 0.250 \: \text{M}\)

    Volume \(= 3.00 \: \text{L}\)

    Find: Mass \(\ce{KMnO_4} = ? \: \text{g}\)

    List other known quantities.

    Molar mass \(\ce{KMnO_4} = 158.04 \: \text{g/mol}\)

    0.250 mol KMnO4 to 1 L of KMnO4 solution

    Plan the problem. Flowchart depicting chemical concentrations with labels: 250 mol KMnO₄ in 1 L solution, followed by 158.04 g KMnO₄ per 1 mol KMnO₄.
    Cancel units and calculate.

    Now substitute the known quantities into the equation and solve.

    \(\begin{align*} \text{mol} \: \ce{KMnO_4} = 0.250 \: \text{M} \: \ce{KMnO_4} \times 3.00 \: \text{L} &= 0.750 \: \text{mol} \: \ce{KMnO_4} \\ \cancel{3.00 \: L \: solution} \times \dfrac{0.250 \: \cancel{\text{mol} \: \ce{KMnO_4}}}{1\cancel{L \: solution}} \times \dfrac{158.04 \: \text{g} \: \ce{KMnO_4}}{1 \: \cancel{\text{mol} \: \ce{KMnO_4}}} &= 119 \: \text{g} \: \ce{KMnO_4} \end{align*}\)

    Think about your result. When \(119 \: \text{g}\) of potassium permanganate is dissolved into water to make \(3.00 \: \text{L}\) of solution, the molarity is \(0.250 \: \text{M}\).
    Exercise \(\PageIndex{4A}\)

    Using concentration as a conversion factor, how many liters of 0.0444 M CH2O are needed to obtain 0.0773 mol of CH2O?

    Answer

    1.74 L

    Exercise \(\PageIndex{4B}\)

    Answer the problems below using concentration as a conversion factor.

    1. What mass of solute is present in 1.08 L of 0.0578 M H2SO4?
    2. What volume of 1.50 M HCl solution contains 10.0 g of hydrogen chloride?
    Answer a

    6.12 g

    Answer b

    183 mL or 0.183L

    How to Indicate Concentration
    • Square brackets are often used to represent concentration, e.g., [NaOH] = 0.50 M.
    • Use the capital letter M for molarity, not a lower case m (this is a different concentration unit called molality).

    Watch as the Flinn Scientific Tech Staff demonstrates "How To Prepare Solutions."

    It is important to note that there are many different ways you can set up and solve your chemistry equations. Some students prefer to answer multi-step calculations in one long step, while others prefer to work out each step individually. Neither method is necessarily better or worse than the other method—whichever makes the most sense to you is the one that you should use. In this text, we will typically use unit analysis (also called dimension analysis or factor analysis).

    Contributors and Attributions

    • Peggy Lawson (Oxbow Prairie Heights School). Funded by Saskatchewan Educational Technology Consortium.


    13.6: Solution Concentration- Molarity is shared under a CC BY-NC-SA 4.0 license and was authored, remixed, and/or curated by LibreTexts.